Tel: +86-371-86151827

china asme sa633 grade c steel plate

Steel grade:china asme sa633 grade c steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

china asme sa633 grade c steel plate Introduction

ASME SA633 Gr.C/SA633 Grade C structural steel plates ...

ASME SA633 Gr.C/SA633 Grade C structural steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

China ASTM A633/SA633 Normalized Low Alloy Structural ...

Tianjin TEDA Ganghua Trade Co., Ltd. SA633, SA633 Grade E, SA633 Gre manufacturer / supplier in China, offering ASTM A633/SA633 Normalized Low Alloy Structural Steel Plate Grade A/C/D/E, Bulk Micron Thickness Aluminum Foil, Micron Aluminum Foil and so on.

SA633 Grade C steel grade - steel grade steel material

China China ASME SA633 Gr C structural steel plate price . We supply ASME SA633/SA633M Grade C Carbon Steel plate and we control the quality of it through layers of quality in order to ensure that our customers can buy the products of ASME SA633/SA633M Grade C Carbon Steel plate Weathering steel plate that match their expectations.

Give You Our Best Carbon Steel Plate China ASME SA633 ...

We Can Offer A36,A283 Grade C,A572 Grade 50 Steel,A36 ... BBN steel is ASME SA572 Gr.42 mild steel plates manufacture and exporter in China. ASME SA633 Gr. D steel plates latest standard change Mn content stipulation ASME SA633 Gr. D steel plates are low alloy steel, and are widely used in bridges, vehicles, ships, buildings,special equipment and so on fields.

ASME SA633 Gr. E/SA633 Grade E structural steel plates ...

ASME SA633 Gr. E/SA633 Grade E structural steel plates are particularly suited for service at low ambient temperatures of −50°F [−45°C] and higher where notch toughness better than that expected in as-rolled material of a comparable strength level is desired.

China ASME SA633 steel plate mill - diphet.nl

Best Quality-Steel plate from China First-Class mill with ... Get Price. stainless steel everywhere - blog post by american . ... SA588 Grade B SA588 Lớp C SA588 Lớp K ASME SA633/SA633M SA633 Lớp SA633 Lớp C SA633 Lớp D SA633 Lớp E ASME SA656/SA656M SA656 Cấp 50 ...

SA633 Grade C Specs - MS Plates - napmr.org

A283 Grade C Plates ASTM A283 Grade C Carbon Steel plate, ASME SA283 Gr.C Tensile Strength Plate Exporters ASME SA633 Grade E steel specification China Best Steel BBN steel can offer A36,A283 Grade C,A572,SA283 steel stock in China,if you need ASME SA633 Grade E . Forging astm 537 difference between class 1 and class 2

SA633 Grade C steel grade - steel grade steel material

China China ASME SA633 Gr C structural steel plate price . We supply ASME SA633/SA633M Grade C Carbon Steel plate and we control the quality of it through layers of quality in order to ensure that our customers can buy the products of ASME SA633/SA633M Grade C Carbon Steel plate Weathering steel plate that match their expectations.

ASME SA588 Grade C pdf - MS Plates - napmr.org

ASME SA588 Gr C cort EN 16mm steel plate mechanical . Grade B,SA588 Grade C,SA588 Grade K, ASME steel plates are under EN 10208 Shipbuilding steel plate ASTM A131 A AH36 EH36 ABS A AH36 EH36 I-beam Angle steel Channel grade: EN 10025-2 S235JR S355JR S355J2 ASTM A36 ASTM A283GR.C A572GR.50 less than 16mm).

ASME SA633 Gr. E/SA633 Grade E structural steel plates ...

ASME SA633 Gr. E/SA633 Grade E structural steel plates are particularly suited for service at low ambient temperatures of −50°F [−45°C] and higher where notch toughness better than that expected in as-rolled material of a comparable strength level is desired.

ASME SA633/SA633M steel coil - Grade A, Grade c, Grade …

Sell and export ASME SA633/SA633M steel coil - Grade A, Grade c, Grade D and Grade E with chemical and mechanical properties. Contact us for width, length, thickness and solutions.

ASME SA633 Grade A steel plate - sa204steel

ASME SA633 Grade A structural steel plate application : SA633 Grade A steel plate is mainly used in oil, chemical, power station, boiler and other industries, for the production reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell, boiler drum, liquefied petroleum Gas ...

Henan BBN Steel supply China ASME SA633 Grade E steel ...

SA633, SA633 Grade E, SA633 Gre manufacturer / supplier in China, offering ASTM A633/SA633 Normalized Low Alloy Structural Steel Plate Grade A/C/D/E, 6082 T6 Aluminum Plate 6061 T6 Aluminium Sheet, Netting Mild Steel Stainless Steel Aluminum Metal Perforated Sheet Mesh and so on.

ASTM A633 Grade A C D E for Sale

ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates. ASTM A633/A633M specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. ASTM A633/A633M Standard main steel grade: ASTM A633Grade A,C,D,E (A633GRA, A633GRC, A633GRD, A633GRE)

China ASTM A283 Grade C Hot Rolled Alloy Steel Plate ...

Alloy Plate, Alloy Steel Plate, ASTM A283 Grade C Plate manufacturer / supplier in China, offering ASTM A283 Grade C Hot Rolled Alloy Steel Plate, API 6D Swing Type Check Valve, FM/UL Fire Fighting Pipe Fitting Threaded Mechanical Tee and so on.

SA633 Grade C equivalent - steel grade steel material

ASME SA633 Grade A steel plate mill - braunjp. Grade D,A633 Grade E SA633 Grade A,SA633 Grade C,SA633 Lachin-GBT16270 Q460C Carbon-and-Low-alloy-High Henan HZZ ofri yon gwo chwazi meyè kalite Lachin-gbt16270 q460c carbon-and-low-alloy-high-strength-steel-plate ak tès enpak.

China ASME SA633 Gr C steel sheet mill - diphet.nl

low allory steel stock price and supplier,BBN steel offer ASME SA588 SA588M Grade K weather proof weathering resistance carbon steel plate steel grade,offer A36,A283Grade C,A572Grade 50,S235JR,S355JR,S355J2 low allory steel stock,as China low allory steel supplier in China,keep SS400,SM570,St37-2,St52-3,Q235B,Q345B/D steel materials.

ASTM A283 Grade C Mild Carbon Steel Plate 6mm Thick Steel ...

China steel plate supplier ASTM A283 Grade C H type steel ... ASTM A283 - Carbon Steel Plates,ASTM A283 Grade C Mild Carbon Steel plate, Type: Steel plate/sheet/coil,JIS G3141 SPCC DC01 ST12 Cold rolled carbon steel plate China Supplier Hot Rolled Astm A36 Steel Plate Sheet Find this Pin and more on Steel Plate-Discount Steel by Gnee Steel.

Low alloy steel plate|Low alloy plate---Steel plate--Xin ...

Steel Name: Low alloy steel plate,Low alloy plate. Main steel grades: St52-3,St50-2,S355JR,S355J2,S355NL,A572 Grade 60,A633 Grade A,Q345B,SM490A. Steel standard: DIN 17100,DIN 17102,EN 10025,ASTM,ASME,GB/T1501,JIS G3106. Main application:Low alloy steel plates are used to manufacture the plants of factory ,the common constructure and construction machinery …

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel ...

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

Supply ASME SA283 Gr D low alloy steel plate

We Can Offer A36,A283 Grade C,A572 Grade 50 Steel,A36 ... ASME SA633 Gr. D steel plates latest standard change Mn content stipulation ASME SA633 Gr. D steel plates are low alloy steel, and are widely used in bridges, vehicles, ships, buildings,special equipment and so on fields. ASTM A285 and ASTM A283 steel plate comparsion - AGICO

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.