Tel: +86-371-86151827

safety new spring steel coil forming

Steel grade:safety new spring steel coil forming

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

safety new spring steel coil forming Introduction

Steel Coil Suppliers - CSC Machine

Visit our FAQ page to find out what coil size you’ll need for your roll forming machine.. Cascadia Metals. cmetals Phone: 1-800-997-8660. United Steel Supply. unitedsteelsupply Phone: 512-263-0954. Goldin Metals (secondary coil supplier) goldinmetals Phone: 228-896-4873. Flack Global Metals

Coil storage system for maximum safety & flexibiltiy | KLP

coilstorage› Home› ProductsLankhorst Mouldings produces a wide range of both single and multi-layer coil storage systems, that will improve the safety of your coil storage warehouse tremendously. Among others, our product range includes coil pads, coil saddles, coil blocks, coil mats, coil cradles, coil wedges and the turn-key KLP® Roll Stop System.

Steel Edging, Strip Steel, Steel Coil: Blue Blade Steel

Pre-skived strip steel from Blue Blade Steel is the material of choice for manufacturers from a variety of industries including blades for hand tools, power equipment, and spring products. Why do I need a skived edge? Edging strip can provide a number of advantages depending on how your part is processed and the specific end use of your product.[PDF]

Experimental and numerical analysis of the cold forming ...

Experimental and numerical analysis of the cold forming process of automotive suspension springs ... The coil springs are not exempt. For this component weight reduction can ... At that time the material of the spring was a steel with 500MPa as UTS. The

Coil Spring Technical Information | MSC Industrial Supply Co.

The most common type of spring is a Coil Spring or Helical Spring, used to store mechanical energy and subsequently release it. These Coil Springs can be closewoundor open-wound and are made of hardened steel. The most common types are: Compression, Extension and Torsion[PDF]

HOW TO MAKE SPRINGS - Educypedia

How to make Springs Page 5 of 62 For compression springs: • If the spring will set solid (compress all the way, so that all the coils touch each other) at the limit of its travel, the diameter of the wire times the number of coils cannot be greater than the space allowed, unless you want the spring itself to act as a mechanical stop to the ...

Making Springs on the Small Lathe - deansphotographica

Making Springs on the Small Lathe This article deals with making small springs using a metal lathe. There may be other, better ways of doing it. This is how I've done things in my own home shop for years, and these methods have worked well for me. You will find two parts to this write up. This one, and a second part linked to at the bottom of ...

Bending Spring Steel, Bending Spring Steel Suppliers and ...

Alibaba offers 7,324 bending spring steel products. About 12% of these are springs, 1% are steel wire, and 1% are spring steel. A wide variety of bending spring steel options are available to you, such as coil, flat;leaf;plate, and spiral.[PDF]

Guidelines for storage and handling BlueScope Steel s …

Guidelines for storage and handling BlueScope Steel’s products Strapping • Strapping and the leading edge of some coils can be sources of stored energy and can spring out when cut or released • Strapping on coils and packs may have sharp edges, particularly if the strapping is made from steel

Coil Spring Technical Information | MSC Industrial Supply Co.

The most common type of spring is a Coil Spring or Helical Spring, used to store mechanical energy and subsequently release it. These Coil Springs can be closewoundor open-wound and are made of hardened steel. The most common types are: Compression, Extension and Torsion

If/how to re-temper a coil spring end | Welcome to the ...

homesteadingtoday› Country Living Forums› Shop TalkJul 06, 2013· I'm doing some work on the mower portion of a John Deere lawn tractor. A coil spring snapped at one end, where the end of it had a hook formed in it to a slightly acute angle. To give a sense of what it is, this spring is made from 10mm spring-steel wire, the coil is about 3/4-inch outside diameter, and the coiled portion is a bit over 3.5-inch ...

How do you Bend/Form/Shape Thin Spring-Steel? - SmokStak

smokstak› …› Antique Gas Engine DiscussionNov 26, 2007· Re: How do you Bend/Form/Shape Thin Spring-Steel? Best way I have done for flat springs is to get Starrett or similar feeler gage stock from MSC or similar industrial supplier. The good thing about feeler stock is that it is hardenable steel, and is available in a lot of thicknesses to match almost any part that needs replaced.

Springs Manufacturing - Quality Spring, Affordable Prices

Springs Manufacturing Definition. The process of manufacturing springs with mechanical spring machinery to create springs by coiling, winding, or bending the spring wire into the shape of a specific spring. Spring manufacturing is an artistic craft that involves specific knowledge in spring making. It encompasses all types of springs. On this ...

Steel Springs Manufacturers Suppliers | IQS Directory

Find steel spring companies that can design, engineer, and manufacture steel springs to your specifications. Peruse our website to review and discover top steel spring manufacturers with roll over ads and complete product descriptions. Connect with the steel spring companies through our hassle-free and efficient request for quote form.

Wire Forming - Whitelegg Machines

About Wire Forming. With design and manufacturing experience stretching over many years, Whitelegg are at the forefront in the supply, servicing and support for innovative wire and spring forming solutions dedicated to the processing of mild steel wire, stainless steel wire and spring steel.

Coiled Wire or Machined Springs: Making the Right Choice

The coils of machined springs can be made in forms that cost more in wire springs: square, rectangular, or trapezoidal. Trapezoidal coils are common to springs used in lateral bending and lateral translation. The shape allows for additional lateral motion without coil contact. Orientation of the rectangular coils can be radial or longitudinal.

AISI 1074/1075 Custom Springs & Stampings | Peninsula Spring

AISI 1074/1075 – ASTM A682 Sheet and Strip Properties Please note that we do not sell AISI 1074/1075 high carbon steel or any other materials in raw form. AISI 1074/1075 sheet and strip are material options for custom springs, etc., manufactured by Peninsula Spring.

How should I bend flat spring steel? | Yahoo Answers

Mar 21, 2008· The steel comes in flat pieces, blue tempered and hardened. Do I simply bend it into shape or should I heat it first and then bend it and plunge it (i.e cool it). It is 10 mils thick, 1/4" wide and 4" long. I'm thinking I can bend it into shape by bending it past the angle of intended use. Then as long as the spring's range of motion is fairly restricted in normal operation, it should be ...Status: Resolved

Spring Manufacturer | Extension, Torsion, Compression ...

Spring manufacturer offers Extension, Torsion, Compression, Flat Springs and flat springs as well as other compression spring metal components of various shapes and sizes.

Metal Stampings, Flat Springs Manufacturer | Newcomb ...

Metal Stampings & Flat Springs Manufacturer Gallery. As a custom wire form manufacturer, Newcomb Spring can produce wire form components in shapes, sizes and designs to meet your unique specifications. Using materials from .007 to .315 inches in wire diameter, we provide fast, accurate and efficient wire forming services.

Michigan Steel Spring

For over 45 years, Michigan Steel Spring has specialized in the manufacture of springs, clips, wire forms, wave and belleville washers as well as flat springs. Our springs are used in critical applications, in industries such as Aerospace, Appliance, Military, Marine, Medical, Transportation and many more.

Steel Edging, Strip Steel, Steel Coil: Blue Blade Steel

Pre-skived strip steel from Blue Blade Steel is the material of choice for manufacturers from a variety of industries including blades for hand tools, power equipment, and spring products. Why do I need a skived edge? Edging strip can provide a number of advantages depending on how your part is processed and the specific end use of your product.

Bending Spring Steel - practicalmachinist

practicalmachinist› …› General - ArchiveDec 14, 2006· I've got to put put two 90 degree bends into a piece of spring steel I've got, to form it into a U shape. The steel is 1095 spring steel, it's .032 thick by .200 wide. I've tried bending it as is--it just snapped. I tried annealing the ends with an oxy-acetylene torch: one bend out of four worked there.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.