Tel: +86-371-86151827

c45 n steel plate

Steel grade:c45 n steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

c45 n steel plate Introduction

C45 - BEBON steel - C45 steel plate

C45 steel plate, EN 10083 C45 steel plate, under EN 10083 standard, we can regard C45 steel plate as high carbon steel.. C45 steel plate is one mainly of high carbon steel,EN 10083 C45 steel plate is for quenching and tempering. Technical delivery conditions for non alloy steels,these steels are for general engineering purposes

C45 Carbon Steel Plates, C45 Sheets Supplier, C45 Plates

The alloying elements in C45 Carbon Steel Plates tend to form either solid solutions or compounds or carbides, where these alloying elements also have an effect on the eutectoid temperature of the steel. Manganese and nickel in SC 45 Carbon Steel Coils lower the eutectoid temperature and are known as austenite stabilizing elements.

C45 Carbon Steel - Delivered Nationwide by West Yorkshire ...

C45 is widely used for components that require better properties than mild steel but does not justify the costs of an alloy steel. Available from stock in bar, C45 can be cut to your requirements. We also offer flame cut plates cut to your required sizes and normalised. C45 flame cut plates can be supplied surface ground or precision ground.

C45 Steel Plate | Murray Steel Products

C45 steel plate is available in a full range of sizes and thicknesses from Murray Steel Products, along with associated processing services, including profiling, cutting and drilling. C45 steel plate is available in a full range of sizes and thicknesses from Murray Steel Products, along with associated processing services, including profiling ...

C45 steel

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. C45 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

EN 10083 C45 steel plate high carbon steel,EN 10083 C45 ...

C45 steel plate, EN 10083 C45 steel plate, C45 high carbon steel plate and sheet, EN10083 steel plate, C45 carbon steel supplier/Chinese C45 steel supplier, C45 steel price,C45 steel manufacturer. C45 steel plate is one mainly of high carbon steel,the application of EN 10083 C45 steel plate is equal to JIS G4051 S45C,DIN17200 C45,UNI7846 C45,NFA AF65-C45 ,UNE36011 C45K and AISI …

C45 Steel - DIN 17200 - EN 10083 Standard quenched and ...

C45 steel – DIN 17200 – EN 10083 Standard quenched and tempered structural steel . C45 steel bar stockholders and suppliers from china. OTAI SPECIAL STEEL Supply in steel round bar, plate, sheet, square bar, flat bar, pipe since 1999.our steel stock more 1000tons

C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C - Otai ...

Supply Range of Steel C45 Round Bar. C45 Steel Round Bar: diameter 8mm – 3000mm. C45 Steel …

C45 Carbon Steel Plates

steelplates.in› Steel Plates› Carbon SteelC45 steel plates are an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 steel plates are equivalent to EN8 steel plates and are widely used for general engineering purposes. C45 carbon steel plates are supplied with EN 10204 3.1 mill certificate, please request when placing any orders.

C45 steel

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. C45 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

c45 steel plate suppliers -Triton Alloys Inc

This steel plate- c45 is well known for its wear resistance and other moderate properties such as thermal expansion and thermal conductivity. This superior grade steel plate- c45 is manufactured in our latest manufacturing unit by using the finest quality raw materials. Our range of Steel Plate-GRADE C45, TISCRAL is widely known for its ...

material c35 c45 n - MS Plates - napmr.org

material c35 c45 n, steel,Hot sell material c35 c45 n, MS Plates stock in China,China material c35 c45 n, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled material c35 c45 n, MS Plates in stock each month. We can meet our customer's any quantity request.

C45 steel sheet,C45 steel Mechanical Properties,C45 steel ...

C45 steel sheet Physico-chemical testing items for products of the plant include tensile test ,hardness test ,impact test ,flattening test ,and chemical composition analysis ,etc .C20,C45 steel pipes are manufactured by cold drawn process.. C45 is a medium carbon steel is used when greater strength and hardness is desired than in the "as rolled" condition.

C45 carbon steel steel plate - hopkinsplasticsurgery

Manufacturer of Steel Plates - Steel Pressure Vessel Plate, Sail Hard, Grade C45 Tiscral Steel Plate and Sail Hard Steel Plate offered by Champak Industries, Mumbai, Maharashtra. ... We are one of the Leading, suppliers of Duplex Steel Plate.Duplex Stainless ... Learn more.

EN 10083 C45 steel plate high carbon steel,EN 10083 C45 ...

C45 steel plate, EN 10083 C45 steel plate, C45 high carbon steel plate and sheet, EN10083 steel plate, C45 carbon steel supplier/Chinese C45 steel supplier, C45 steel price,C45 steel manufacturer. C45 steel plate is one mainly of high carbon steel,the application of EN 10083 C45 steel plate is equal to JIS G4051 S45C,DIN17200 C45,UNI7846 C45,NFA AF65-C45 ,UNE36011 C45K and AISI …

Carbon Steel Plates - C45 Plate Manufacturer from Mumbai

C45 steel plate, EN 10083 C45 steel plate, under EN 10083 standard, we can regard C45 steel plate as high carbon steel.. C45 steel plate is one mainly of high carbon steel,EN 10083 C45 steel plate is for quenching and tempering. Technical delivery conditions for non alloy steels,these steels are for general engineering purposes

C45/1045 Carbon Steel Bars, Rods, Plates - Buy Now

steelbars.in› Carbon SteelC45/1045 carbon steel bars supplied by Metline Industries are certified to highest level of industry standards, and are accompanied by Mill Test Certificates, as per EN 10204 3.1. We can supply cut to size C45 /1045 carbon steel bars, with both small and wide diameters.

C45 Steel plate,C45 Steel pipe - Steel Exporter BeBon China

Under EN 10250-2:1999 standard, C45 steel plate pipe has got ISO 9001:2000 International Quality control certificate .The C45 steel sheet Physico-chemical testing items for products of the plant include tensile test ,hardness test ,impact test ,flattening test ,and chemical composition analysis ,etc . C20,C45 steel pipes are manufactured by cold drawn process.

C45 / 1.0503 Non-alloy quality steel - equivalent ...

Non-alloy quality steel Chemical composition of steel C45 (1.0503), Standards of steel C45 (1.0503) Mechanical Properties of steel C45 (1.0503) Equivalent grades of steel C45 (1.0503) Tensile Strength, Elongation, Proof strength, Hardness

c45n steel - onlineshoppingsitesinindia.co.in

C45 steel plate, EN 10083 C45 steel plate, under EN 10083 standard, we can regard C45 steel plate as high carbon steel. C45 steel plate is one mainly of high carbon steel,EN 10083 C45 steel plate is for quenching and tempering. Technical delivery conditions for non alloy steels,these steels are for general engineering purposes.

c45 steel composition percentages - Cold rolled steel ...

C45 steel plate, EN 10083 C45 steel plate, under EN 10083 standard, we can regard C45 steel plate as high carbon steel.. C45 steel plate is one mainly of high carbon steel,EN 10083 C45 steel plate is for quenching and tempering. Technical delivery conditions for non alloy steels,these steels are for general engineering purposes.

what is c45 steel - natural-elements-online

C45 steel plate, EN 10083 C45 steel plate, under EN 10083 standard, we can regard C45 steel plate as high carbon steel.. C45 steel plate is one mainly of high carbon steel,EN 10083 C45 steel plate is for quenching and tempering. Technical delivery conditions for non alloy steels,these steels are for general engineering purposes.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.