Tel: +86-371-86151827

201 stair duplex stainless steel plate

Steel grade:201 stair duplex stainless steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

201 stair duplex stainless steel plate Introduction

Nickel 200/201 Nickel Alloy Plate - Sandmeyer Steel

Duplex Stainless Plate; LDX 2101 ... Nickel 200 and 201 plate can also be joined to steel with Nickel Welding Electrode 141 and Nickel Filler Metal 61. In general, Nickel 201 plate can be welded by the same procedures as Nickel 200 plate with one exception. The oxyacetylene process cannot be used for Nickel 201 plate.

Duplex/Super Duplex Stainless Steel Plate Products ...

Duplex stainless steel plate contains relatively high levels of chromium (between 18% and 28%) and low to moderate amounts of nickel (between 1.5% and 8%). The high corrosion resistance and excellent mechanical properties of duplex stainless steels can be attributed to their chemical composition and balanced (duplex) microstructure of ...

hot rolled 2 5mm stainless steel plate 201

Alloy 2205 Duplex Stainless Steel Plate - Sandmeyer Steel Processing Hot Forming Forming below 600 F is recommended whenever possible. When hot forming is required, the workpiece should be heated uniformly and worked in the range of 1750 to 2250 F. Alloy 2205 duplex stainless steel plate …

2205 Duplex Stainless Steel Plate - UNS S32205

2205 is a duplex stainless steel, with a chemical composition of nearly equal proportions of austenite and ferrite. This combination allows the alloy to be stronger and tougher than standard austenitic steels. Duplex stainless steels like 2205 also maintain good weldability in their thickest sections, and they are much more resistant to stress corrosion cracking than standard austenitic steels.

Duplex stainless steel - imoa.info

Duplex stainless steels are called “duplex” because they have a two-phase microstructure consisting of grains of ferritic and austenitic stainless steel. The picture shows the yellow austenitic phase as “islands” surrounded by the blue ferritic phase. When duplex stainless steel is …[PDF]

North American Stainless

North American Stainless . Flat Products Stainless Steel Grade Sheet . 201 (S20100) 201LN (S20153) EN 1.4372 . Introduction: SS201 is a lower-cost alternative to the conventional Cr-Ni austenitic stainless steels, such as SS304. About half of the nickel content of SS304 is replaced with alloy additions of manganese and nitrogen.

China Stainless Steel Glass Spigot for Frameless Glass ...

China Stainless Steel Glass Spigot for Frameless Glass Railing (SJ-S1013), Find details about China Railing, Glass Railing from Stainless Steel Glass Spigot for Frameless Glass Railing (SJ-S1013) - Shijue Metal Products Co., Ltd.

Properties and Composition of Type 201 Stainless Steel

Facts About Type 201 Stainless Steel Type 201 stainless steel is a mid-range product with a variety of useful qualities. While it is ideal for certain uses, it is not a good choice for structures that may be prone to corrosive forces such as salt water.[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades

LDX 2101® - Rolled Alloys, Inc.

The use of manganese ensures proper ferrite-austenite phase balance, while allowing a reduction in nickel content. As a result, LDX 2101® is priced competitively with 304/304L and 316/316L stainless steels. The combination of a duplex structure and high nitrogen content provide significantly higher strength levels than 316/316L stainless steel.

SUS 201 steel in UK - MS Plates - napmr.org

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more . Stainless Steel Plate. Penn Stainless Products stocks over 30 grades of stainless steel plate–in 300 series stainless, 400 series stainless, high temperature stainless grades, precipitation hardening, duplex stainless steel …

201 steel in Venezuela - MS Plates - napmr.org

201 stainless steel coil for Mexico - srilankasports.org. China 201 Stainless Steel Sheet manufacturer, 304 SHAANXI SHUNYI STEEL PIPE Co., Ltd is a professional company dedicated in production, sales and exporting stainless steel sheet, stainless steel plate, stainless steel coil adhere to ASTM A240, ASTM A480, JIS 4304 standards and so on.

201 Stainless Steel Coil - Jainex Steel

201 Stainless Steel Coil. We offer our prestigious clients the premium quality range of 201 Stainless Steel Coil, Stainless Steel slit 201 Coil, ASTM A240 Grade 201 Stainless Steel Coil, 4% Nickel Grade 201 Stainless Steel Coils, AISI 201 Stainless Steel Coil HR, Cold rolled 201 stainless steel coil and Hot rolled 201 stainless steel coil.

Stainless Steel Plate 201 - hopkinsplasticsurgery

201 304 Stainless Steel Plate Wholesale, Suppliers ...A wide variety of 201 304 stainless steel plate wholesale options are available to you, such as astm, aisi, and jis. You can also choose from bv, fda, and sgs. As well as from plate, coil. And whether 201 304 stainless steel plate …

Properties and Composition of Type 201 Stainless Steel

Facts About Type 201 Stainless Steel Type 201 stainless steel is a mid-range product with a variety of useful qualities. While it is ideal for certain uses, it is not a good choice for structures that may be prone to corrosive forces such as salt water.

Super Duplex 2507 Stainless Steel Tube - steelsheetguide

Live Price 2507 S32760 Duplex Stainless Steel Pipe and . Our 2507 S32760 Duplex Stainless Steel Pipe and Tube, Duplex and Super Duplex products are of European origin, have recognised quality and the required traceability. A number of Inian & Brazilian companies have been Oshwin clients for years through our international sales network.”

AISI Standard 201 SUS303 304 Stainless Steel plate

Stainless Steel Sheet, Stainless Steel Plate, Stainless Steel Coil manufacturer / supplier in China, offering Ss 304 Plate Cold Rolled 2b Price Per Ton, Tisco Steel Factory Inox Stainless Steel Plate 304, AISI 321 Ba/2b Stainless Steel Coil/Roll with Interleaving Paper PVC Film and so on.

201 202 Stainless Steel Welded Tube For Decoration And ...

201 202 Stainless Steel Welded Tube For Decoration And Furniture , Find Complete Details about 201 202 Stainless Steel Welded Tube For Decoration And Furniture,201 Stainless Steel Welded Tube,202 Stainless Steel Welded Tube,Stainless Steel Decoration And Furniture Tube from Stainless Steel Pipes Supplier or Manufacturer-Zhangjiagang Channel Int'l Co., Ltd.[PDF]

Stainless steel grade chart - Atlas Steels

ATLAS STEELS METAL DISTRIBUTION Stainless steel grade chart ATLAS STEELS – SPECIALTY STEELS PRODUCT REFERENCE MANUAL ... Austenitic stainless steels Plate Annealed 600 310 40 95 HRB ... Ferritic/Austenitic (Duplex) stainless steels. 6 S9 ATLAS STEELS – SPECIALTY STEELS PRODUCT REFERENCE MANUAL SECTION 9: APPENDICES

Duplex 2205 Stainless Steel - Penn Stainless Products

Duplex 2205 Stainless Steel. Penn Stainless inventory now includes Duplex 2205 (UNS S32205 / S31803), in sheet, sheet coil, plate, plate coil, round bar, processed flat bar and tubular products. Duplex 2205 is ideally suited for high-pressure and highly corrosive environments.[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades[PDF]

200 series stainless steel

stainless steel is for automotive exhaust systems where grade 409 is the most common grade. But they are also used for many other items such as washing machine drums, bright trim on automobiles, roofing, siding and railway wagons for coal and iron ore. They represent about 25% of all the stainless steel used worldwide. Austenitic stainless steels

Stainless Steel - Samuel, Son & Co.

Stainless Steel Samuel is one of the largest processors and distributors of stainless steel products in North America. We are recognized by our global supply partners as a market leader that can provide the most competitive, highest quality supply solution for your requirements.

201 stainless steel plate - Stainless steel sheet ...

201 stainless steel plate Thickness:0.2mm-150mm Width:1000mm,1219mm,1500mm,1800mm,2000mm or customized Length:2000mm,2438mm,6000mm,stainless steel coil or customized Surface:NO.1 hot rolled--heat treatment--pickling[PDF]

North American Stainless

North American Stainless . Flat Products Stainless Steel Grade Sheet . 2205 (S32205)/ EN 1.4462 (S31803) Introduction: SS2205 is a duplex stainless steel with a microstructure, when heat treated properly, of nearly equal proportions of austenite and ferrite. This microstructure ensures that SS2205

Stainless Steel 201LN | UNS S20153 - Diversified Ulbrich

Diversified Ulbrich is a full line stainless steel service center and distributor specializing in sheet, bar, plate, tubing, structural angle as well as rolled and slit coil. Aluminum sheet, plate and Specialty Metals are the newest additions to our product line.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.