Tel: +86-371-86151827

s30908 as 516 gr steel plate 70

Steel grade:s30908 as 516 gr steel plate 70

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s30908 as 516 gr steel plate 70 Introduction

:: Hot Rolled Steel Plates :: A/SA516-70, A/SA515-70, ST52 ...

ASTM A516 Grade 60/70 Fully Killed, Normalized, Vacuum Degassed for Boiler & Pressure Vessel ASTM A516 Grade 70 HIC Tested acc. to TM0284 (Hydrogen Induced Cracking) ASTM A516 Gr.70 HIC & SSCC Tested, ASTM A516-70 HIC & SSCC Tested ASTM A516 Grade 70 NACE MR-0175 HIC & SSCC Tested, SA516-70 NACE HIC+SSCC Tested

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA516 steel plate, also known as PVQ516 steel plate, is carbon steel with specifications for pressure vessel plates and moderate or lower temperature service. A516 steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

ASME SA516 Gr.70 Normalized Steel Plates - ashtapad

ASME SA516 Gr.70 Normalized Steel Plates : Manufacturers, Exporters, Stockist India & Suppliers Worldwide Stainless steel, carbon steel, alloy steel, nickel, other ferrous & non-Ferrous metals in shape of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners from India

Asme sa516 grade 70|sa516 grade 60 steel plate specification

For example sa 516 grade 70 has the highest tensile and yield strength range due to the highest Carbon content(up to0.28%). For higher grade like sa516 gr-70 steel plate, preheating might be needed for metal arc welding process, especialy with thick steel plate.

SA516-70 Normalized Boiler Quality Steel Plate(id:3591303 ...

SA516-70 Normalized Boiler Quality Steel Plate(id:3591303), View quality SA516-70 Plates, SA516-70N Plates, SA 516-70 Plates details from Rolex Metal Distributors storefront on EC21. Buy best SA516-70 Normalized Boiler Quality Steel Plate with escrow buyer protection.

SA516 Grade 70N Plates A516 Gr.70N Plates - DIYTrade

SA516 Grade 70N Plates A516 Gr.70N Plates SA516 Gr.70N - SA516 Grade 70N Plates A516 Gr.70N Plates Products Made In Germany, India Trading Company. SA516 Grade 70N Plates A516 Gr.70N Plates We are Stockholder & Distributors of Boiler Quality, Pressure Vessel, High Tensile Steel Plates in Grades S355J2G3, S355J2G3+N, ST52-3, ST52-3N, S355J2H, S355J2+N, ST52.0, E355, P355N, …

ASTM A516 Carbon Steel, Grade 70 - MatWeb

ASTM A516 Carbon Steel, Grade 70 Categories: Metal; Ferrous Metal; Alloy Steel; Low Alloy Steel; ASTM Steel; Carbon Steel; Low Carbon Steel. Material Notes: Carbon steel plate for moderate and lower temperature service.

ASTM A516/ ASME SA516 PVQ Steel Plate | BBN Steel

SA516 is a carbon steel plate grade utilized primarily in welded pressure vessels for moderate to lower temperature service. This material is produced in grades 55, 60, 65 and 70. This material is also offered in the normalized condition where improved notch toughness is required.

SA516 Grade 70N Plates A516 Gr.70N Plates

SA516 Grade 70N Plates A516 Gr.70N Plates : Manufacturers & Exporters Stainless steel, carbon steel, alloy steel, nickel, other ferrous & non-Ferrous metals in shape of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners from Oman

SA516 Grade 60/70 Normalized & Stress Relieved Plates

SA516 Grade 60/70 Normalized & Stress Relieved Plates : Manufacturers, Exporters, Stockist India & Suppliers Worldwide Stainless steel, carbon steel, alloy steel, nickel, other ferrous & non-Ferrous metals in shape of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners from India

Standard Specification for Pressure Vessel Plates, Carbon ...

A516 / A516M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service pressure vessels~ welded steel plates~ welded steel sheets~ welded steel …

ASTM A516 GR 60/70 Steel Plate-GNEE GROUP Discount …

Product Introduction

A516 Grade 70 Steel Plate Suppliers|ASTM A 516 Gr.70 Plate

Triton Alloys Inc. is a A516 Grade 70 Steel Plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies A516 Grade 70 Steel Plate to internationally approved quality standards for applications. A516 Grade 70 Steel Plate have excellent quality to fully satisfy customer’s requirements.

Pressure Vessel Steel Plates - Steel Plates ASTM A 516 ...

Wholesaler of Pressure Vessel Steel Plates - Steel Plates ASTM A 516 Grade 60, ASTM A 515 Steel Plates Grade 60, Steel Plates ASTM A 516 and ASTM A 516 GR 70 HIC Nace Tested Steel Plates offered by Dmson's Metal Pvt Ltd, Mumbai, Maharashtra.

A516Gr70 steel plate - steel plates - BEBON INTERNATIONAL

A516Gr70 steel plate. Leave a Message Get a price EX-Stock Promotion Center. PDFA516Gr70 steel plates information. WORDA516Gr70 steel plates information. ASTM A516 Gr 70 steel plate/sheet,ASTM A516 Gr 70 steel plate/sheet, under ASTM standard, we can regard A516 Gr 70 steel plate/sheet for simple pressure vessels steel.

SA516-70 Normalized Boiler Quality Steel Plate(id:3591303 ...

SA516-70 Normalized Boiler Quality Steel Plate(id:3591303), View quality SA516-70 Plates, SA516-70N Plates, SA 516-70 Plates details from Rolex Metal Distributors storefront on EC21. Buy best SA516-70 Normalized Boiler Quality Steel Plate with escrow buyer protection.

SA516 Grade 70N Plates A516 Gr.70N Plates - DIYTrade

SA516 Grade 70N Plates A516 Gr.70N Plates SA516 Gr.70N - SA516 Grade 70N Plates A516 Gr.70N Plates Products Made In Germany, India Trading Company. SA516 Grade 70N Plates A516 Gr.70N Plates We are Stockholder & Distributors of Boiler Quality, Pressure Vessel, High Tensile Steel Plates in Grades S355J2G3, S355J2G3+N, ST52-3, ST52-3N, S355J2H, S355J2+N, ST52.0, E355, P355N, …

S30908 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S30908 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

ASME SA516 Plate - SA516 Steel Plate Grades 60, 65, and 70 ...

universalsteelamerica› Steel Plate ProductsUniversal Steel stocks SA516 in the as-rolled, normalized, and HIC tested conditions, with thicknesses ranging from 3/16” up to 12.5” thick. SA516 material is available in grades 60, 65, and 70. Specialized testing and chemical or physical requirements vary depending on the specific final application of the steel plate.

ASME SA516 Grade 70|SA516 Grade 60 Steel Plate Specification

For example sa 516 grade 70 has the highest tensile and yield strength range due to the highest Carbon content(up to0.28%). For higher grade like sa516 gr-70 steel plate, preheating might be needed for metal arc welding process, especialy with thick steel plate. Test&Inspection for ASME A516 Steel Plate…

SA516-70 Normalized Boiler Quality Steel Plate(id:3591303 ...

SA516-70 Normalized Boiler Quality Steel Plate . ASME SA516/SA516M-07 ASME SA20/SA20M-07 Grade 60/70 ASME SA578/SA578M Level-B, Fully Killed, Normalized, MT+LTV, Made by Steel Making Process BOF (Basic Oxygen Furnace) + VD (Vacuum Degassed) with EN10204 3.2 Mill Certificate & …

SA-516-Carbon Steel Pressure Vessel Plates for Moderate ...

aasteel› Products/Industries› PVQ Carbon & AlloySA-516. Home > Products/Industries > PVQ Carbon & Alloy > SA-516; Overview. Fine grain steel intended for moderate / low temperature service in boilers and PVQ applications. This grade is produced in both the As Rolled and Normalized condition. Download SA-516 Chemical and Tensile Requirements PDF (154 KB) Chemical Requirements

ASME SA516 / ASTM A516 - Gr. 70 - Brown McFarlane

About ASME SA516 Grade 70 and ASTM A516 Grade 70. We hold large stocks of plates certified to ASTM A516 Gr. 70 and ASME SA516 Gr. 70 in our warehouse facilities in the U.K. A range of specially manufactured hydrogen induced crack resistant steel in SA / A516 Gr. 70 HIC is also available from stock. These are steel specifications that are at the ...

S30908 steel

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S30908 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

ASTM A516 Gr55/60/65/70 carbon steel plates for pressure ...

ASTM A516 Carbon Steel Plate Introduction. HOME > blog. In order to provide the best possible service to our customers, ANSON Steel stocks ASTM A516 Gr. 70 and ASME SA516 Gr. 70 plates with numerous supplementary requirements included and all noted on the material test certificate supplied with each plate.

sa516 Gr 70 | hic steel plate|SA 516 Gr.70 Nace Plate|SA ...

sa516 Gr 70 steel plate . Triton Alloys Inc carries one of the largest stocks of A516 Nace Plate, SA 516 Gr.70 Nace Plate, sa516 Gr 70 steel plate in India

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.