Tel: +86-371-86151827

factory 310 310s 410s stainless steel plate

Steel grade:factory 310 310s 410s stainless steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

factory 310 310s 410s stainless steel plate Introduction

Alloy 310/310S Heat Resistant Stainless Steel Plate ...

Sandmeyer stocks Alloy 310/310S, a multi-purpose austenitic heat resistant stainless steel with oxidation resistance under mildly cyclic conditions to 2010°F. Sandmeyer Steel Company stocks Alloy 310/310S, a multi-purpose austenitic heat resistant stainless steel with oxidation resistance under mildly cyclic conditions to 2010°F.

Factory 310 perforated sheet of stainless steel

TYP PERFORATED,MATL SS 304-Chequered Plate for Strainer . Anping Wire Mesh Made in China Factory Chequered Plate are used mainly for the manufacture of bridges, steel structures, ships, Available in varied assortment, our Stainless Steel Chequered Plates are manufactured Grade: ASTM A 240 Gr 304, 304L, 304H, 309S, 309H, 310S,409, 410S, 420, 430, 904L, 310H,?

Alloy 410S Ferritic Stainless Steel - Sandmeyer Steel

The oxidation resistance of 410S stainless steel is good. It can be used in continuous service up to 1300°F (705°C). Scaling becomes excessive above 1500°F (811°C) in intermittent service. Formability. 410S stainless steel can be easily formed by spinning, bending and roll forming. Chemical Analysis

Stainless Steel 310/310S, Steel Plate/Sheets, Coil Suppliers

steelplates.in› Stainless Steel Sheets, Plates, CoilsStainless Steel 410/410S. 410 Stainless Steel Sheets/Plates, SS 410 Coils; Stainless Steel 410S Sheets/Plates, Coils-1.4000, S41008; Stainless Steel 310/310S. Stainless Steel 310, 310S Sheets/Plates; Stainless Steel 347/347H. SS 347/347H Sheets & Plates; Stainless Steel 441 ... Steel Plates, Sheets and Coils Factory in India | Disclaimer ...

China Ss AISI SUS 310S 310 Stainless Steel Sheet - China ...

310 Stainless Steel Sheet, 310S Stainless Steel Sheet, Stainless Steel Sheet 310S manufacturer / supplier in China, offering Ss AISI SUS 310S 310 Stainless Steel Sheet, Stainless Steel Checkered Plate (304 316L 410S 420 420J1 420J2), Stainless Steel Checkered Plate Stock Price (304 SUS304 316 316L) and so on.

aisi 310s stainless steel - MS Plates - napmr.org

aisi 310s stainless steel, steel,Hot sell aisi 310s stainless steel, MS Plates stock in China,China aisi 310s stainless steel, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled aisi 310s stainless steel, MS Plates in stock each month. We can meet our customer's any quantity request.

China Stainless 304 310S 410s Hex Mesh Refractory Lining ...

China Stainless 304 310S 410s Hex Mesh Refractory Lining, Find details about China Temperature Resistance Hex Net, Stainless Steel Sheet from Stainless 304 310S 410s Hex Mesh Refractory Lining - Anping Maituo Metal Wire Mesh Co., Ltd.

China Ss 304 316 316L 309 310 310S Stainless Steel Plate ...

310S Stainless Steel Plate, 310 Stainless Steel Plate, 304 Stainless Steel Plate manufacturer / supplier in China, offering Ss 304 316 316L 309 310 310S Stainless Steel Plate, 0.39mm 0.4mm 0.41mm 0.42mm 0.43mm 0.44mm 99.994% Pure Lead Foil for Laboratory, 99.994% Pure Lead Foil for Laboratory and so on.

Stainless Steel 310/310S, Steel Plate/Sheets, Coil Suppliers

steelplates.in› Stainless Steel Sheets, Plates, CoilsStainless Steel 410/410S. 410 Stainless Steel Sheets/Plates, SS 410 Coils; Stainless Steel 410S Sheets/Plates, Coils-1.4000, S41008; Stainless Steel 310/310S. Stainless Steel 310, 310S Sheets/Plates; Stainless Steel 347/347H. SS 347/347H Sheets & Plates; Stainless Steel 441 ... Steel Plates, Sheets and Coils Factory in India | Disclaimer ...

Stainless Steel 310 Plate, SS 310S Plates Supplier in ...

Grade AISI/SS 310 / 310S Plate is one of the most demanding and widely used stainless steel products. Type 310/ 310S also known as DIN 1.4845 is the most common yet popular grades with heat and corrosion resistance supplied to various industrial sectors.

SS 310S Sheets/Plates Suppliers, Buy Stainless Steel 310/310S

steelplates.in› …› Stainless Steel 310/310SDescription Manufacturers & Suppliers of Stainless Steel 310S Sheets, SS 310 Plates, Buy 310/310S Sheets at Discounted Prices from Metline ASTM A240: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip …

ASTM A240 310S spec - MS Plates - napmr.org

Blend 310S UNS S31008 Plate in a perfect world suited for high-temperature applications, for example, warm treatment and substance dealing with mechanical assembly. 310 Stainless Steel Plate-Austenitic warmth safe study with higher chromium and nickel for oxidation impediment past 2000°F. ASTM spec for 310 Stainless Steel Plate: ASTM A240

Experienced supplier of 310 stainless steel pipe,309 ...

309(s)/310(s) stainless steel pipe/tube is used in high temperature. 309/309s,310/310s stainless steel pipe/tube are high temperature resist stainless steel. We hold about 5000-10000 Metric tons stainless steel in stock monthly. we provide the best prices, quality, support, and quick delivery time

SA240 310S,SA240 TP 310S,SS 310S Plate,TP310S-SA240 …

SA240 310S, SA240 TP 310S, SS 310S Plate, TP310S . Unitedsteel Stainless Factory is the large manufacturer to supply SA240 310S,SA240 TP 310S,SS 310S . Stainless plate,TP310S as per ASTM, ASME, JIS , EN, UNS Specs. We have about 3000tons each . thickness and size stainless plates and large warehouse. If you have any requirement for

Hex-Mesh Refractory Lining Stainless Steel 310S 3/4" …

Hex-Mesh Refractory Lining Stainless Steel 310S 3/4" depth, 16gauge thickness . Hex Mesh is a hexagonal cellular mesh grating specifically designed for reinforcing both linings and flooring.It acts as a surface framework to hold cement or refractory in position, and relieves stress in the lining’s upper crust, which prevents spalling and cracking.

310/S Stainless Steel Grade | Penn Stainless Products

310/S Stainless Steel. Penn Stainless inventory now includes 310/ 310S Plate and Processed Flat Bar (Alloy 310 UNS S31000 / Alloy 310S UNS S31008), ideally suited for high-temperature applications such as heat treatment and chemical processing equipment.

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more ...

Penn Stainless Products is a supplier and processer of stainless steel plate in over 30 grades, including 304/L,316/L,309/S, 310/S, duplex, 330 and many more.

310 - Rolled Alloys, Inc.

310 Stainless Steel - Austenitic heat resistant grade with higher chromium and nickel for oxidation resistance beyond 2000°F. ... 410S Stainless Steel is a weldable, lower-carbon, 12 chromium martensitic. 416. Inventory. Round Bar; ... Often in many product forms, the grain size and carbon content can meet both the 310S and 310H requirements ...

China Stainless Steel Plate (201, 301, 304, 321, 316, 316L ...

310 Stainless Steel Sheet, 310 Stainless Steel Plate, 310 Stainless Steel Coil manufacturer / supplier in China, offering Stainless Steel Plate (201, 301, 304, 321, 316, 316L, 309S), Stainless Steel Sheet 254smo, 254smo Stainless Steel Manufacturer, ASTM S32654 Stainless Steel Plate. ASTM a 240 Steel Plate and so on.

Cold Rolled 310S 1.4845 1219X2438mm Stainless Steel Sheet

Stainless Steel Plate, Stainless Steel Sheet, Inox Plate manufacturer / supplier in China, offering Cold Rolled 310S 1.4845 1219X2438mm Stainless Steel Sheet, Monel 400 Forged Rods, Nickel Copper Alloy Tube / Pipe, 304 304L 316 316L 310 410 430 Stainless Steel Sheet/Plate…

China Stainless Steel Plate manufacturer, Stainless Steel ...

Stainless Steel Sheet and Coil and Pipe and Rod and Angle Bar and Channel Bar and Pipe Fittings, Carbon Steel Plate and Alloy Steel Plate and Corten Plate, Seamless Steel Pipe, Welded Steel Tube, Square and Rectangular Steel Pipe, Galvanized Steel Pipe and Plate and Coil, PPGI, PPGL, Pressure Vessel, Boiler and Boiler Accessories, Mechanical Equipment, Copper Plate and Pipe and Bar, …

410 Stainless Steel Strip Wholesale - EC21

High Quality 2B BA 8K Finish 410 430 Stainless Steel Coil Strip. High Quality 2B BA 8K Finish 410 430 Stainless Steel Coil Strip Company Information: We are specialized in steel for over 10 years, especially stainless steel sheets,coils,strips,pipes,bars,etc, which are widely used in the fields of food processing, medicine, chemical industry, metallurgy, construction, water conservancy and ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.