Tel: +86-371-86151827

st52 steel plate s235 steel plate

Steel grade:st52 steel plate s235 steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

st52 steel plate s235 steel plate Introduction

ST52-3 Steel Plate | Murray Steel Products

ST52-3 grade steel is a readily weldable low carbon manganese steel with good impact resistance (including in sub-zero temperatures). This material is commonly supplied in the untreated or normalised condition. Machinability of this material is similar to that of mild steel.

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

S355 Structural Steel Plate, S355JR Structural Steel Plate ...

Conquest Steel and Alloys is India Based Leading Supplier and Stockist of High Quality and Speciality Steel Such as S355 Structural Steel Plate, S355 Structural High Tensile Steel Plates Available in Ready Stock of IS 2062 E350 C Steel plates Exporter located in Mumbai, India.

S355 Structural Steel & Steel Plate | Murray Steel Products

S355 steel plate and structural sections in stock at Murray Steel Products. Range of processing services available, including profiling, cutting and drilling. ... Structural Grades S235JR S275JR S275JO S355NL S355JR S355JO S355J2 S355K2 ST52-3. Weathering Steel / Corten Equivalent S355JOW S355K2W S355J2W. Medium Carbon Steel C45 EN8 EN8D.

st52 steel plate s235 steel plate - steeltube.in

st52 steel plate s235 steel plate. Our steels have been widely applied to many industries and fields, such as the construction industry, shipbuilding industry, pressure vessels and boilers, oil and gas, bridge construction, offshore platforms, stamping cold forming,etc.

S355 Structural Steel Plate | Leeco Steel, LLC

leecosteel› …› EN Standard Steel PlateS355 is a non-alloy European standard (EN 10025) structural steel that is high-strength most commonly used after S235. S355 steel covers four of the six categories within the EN 10025: 2004 standard. With minimum yield of 50 ksi, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709.. Careful attention should always be placed on the specific variation of S355 ...

BS EN10025 structural steel plate - S235, S275 and S355 ...

BS EN10025 structural steel plate and equivalent ASTM. HOME > blog. ANSON Steel offers structural steel plate that meets the European standard for structural steel. Structural steel is a standard construction material, made from specific grades of steel and formed in a range of industry standard cross-sectional shapes (or ‘Sections ...

A St 52 steel plate - BEBON INTERNATIONAL

A ST 52 steel plate, DIN17135 A ST 52 steel plate is a kind of material for boiler and pressure vessel steel. DIN17135 A ST 52 steel plate is characterized by a minimum yield strength of 280-355 MPa and by good weldability, so A ST 52 steel is mainly used for manufacturing boilers, pressure vessels and pipes transporting hot liquids.

ST52-3 steel plate - BEBON INTERNATIONAL

ST52-3 steel plate is supplied in normalized or control-rolled condition. ST52-3 steel has many applications.Generally ST52-3 steels is used for Machinery parts, mobile equipment, crane, boom, chassis, buildings, bridges and most structural activities. Bebon International is a professional ST52-3 steel exporter and a steel Stockist in china. We ...

st52 steel plate s235 steel plate - steeltube.in

st52 steel plate s235 steel plate. Our steels have been widely applied to many industries and fields, such as the construction industry, shipbuilding industry, pressure vessels and boilers, oil and gas, bridge construction, offshore platforms, stamping cold forming,etc.

st52 steel plate s235 steel plate q345b steel plate

st52 steel plate s235 steel plate q345b steel plateQ345B A572 S355 ST52 ALLOY STEEL . Q345B,Q345B PLATE,Q345B STEEL. Steel grade Q345B is the most common used as high strength low alloy structural steel in industry area.Xinsteel can offer steel coils,steel plates,angles,channels for Q345B materials.The equivalent steel grade with Q345B are EN 10025-2 S355JR,ASTM A572/A572 …

S235 - Structural Steel / Steel Plate - Murray Steel

Description. S235 grade steel is a readily weldable low carbon manganese steel with good impact resistance (including in sub-zero temperatures). This material is commonly supplied in the untreated or normalised condition and is available in several variations (denoted by additional letters and/or digits), which offer slight modifications of chemical composition and mechanical properties.

S235/S275/S355 MS Sheet , ST52 Hot Rolled Coil Steel ...

S235/S275/S355 MS Sheet , ST52 Hot Rolled Coil Steel Thickness 8mm-600mm . Description: In most metals but not all, plate generally starts at 0.188″ (3/16″) thick. Due to its thickness, plate is often used for structural applications such as heavy equipment manufacturing, bridge and building erection.

St52 Steel Plate S355 Steel Plate - hopkinsplasticsurgery

st52 steel plate s355 steel plate - Henan BBN. st52 3 steel plate s355 steel plate 50mm thick ar500 steel plate is widely used in construction of bridges, riveted, bolted, and other structural elements included drilling machine, power shovel, electricity drive wheel counter-mine trolley, mineral product automobile, excavator, car loader ...

S235 Structural Steel Plate, S235JR Structural Steel Plate ...

Conquest Steel and Alloys is India Based Leading Supplier and Stockist of High Quality and Speciality Steel Such as S235 Structural Steel Plate, S235 Structural High Tensile Steel Plates Available in Ready Stock of S 2062 E250 A Steel Plate Exporter located in Mumbai, India.

st52 steel plate s235 steel plate q345b steel plate, View ...

st52 steel plate s235 steel plate q345b steel plate, US $ 300 - 450 / Ton, AISI, ASTM, BS, DIN, GB, JIS, Q235, 0.12mm-12mm.Source from Tangshan Junnan Trade Co., Ltd ...

SS400 S235 S355 ST37 A36 structure plate

Beam Dimension supplier · Prime Hot Rolled Steel H beam;Structural Steel Hbeam Hot Rolled Unequal Angles Bars with Grade S235 S355 SS400 A36Q235 ST37,ST44,ST52 Mild Steel Plate · ASTM A36,ASTM A572 CarbonStructural and Galvanized steel plates For Siemens Project;Get Same QualityGal sheet as

BS EN10025 structural steel plate - S235, S275 and S355 ...

BS EN10025 structural steel plate and equivalent ASTM. HOME > blog. ANSON Steel offers structural steel plate that meets the European standard for structural steel. Structural steel is a standard construction material, made from specific grades of steel and formed in a range of industry standard cross-sectional shapes (or ‘Sections ...

Equivalents of Carbon Steel Qualities - MESTEEL.COM

High Yield Steel High yield strength cold forming steels Simple pressure vessels steel Stamping and cold forming steels Steel for Boilers and Pressure Vessels Steel for gas cylinders and gas vessels Steel for large diameter pipes Steel For Ship Building: Steel for welded tubes Steel Resistant to Atmospherical corrossion Steel with Cr., Mo.,Cr-Mo.[PDF]

Structural Steel Plate and Strip to EN 10025

In addition, structural steel plate and strip to American, other European and Japanese specifications are available on enquiry. Refer to Table 4 for a list of the corresponding former national designations. Steel to EN 10025-2 is intended for structural work where no significant forming or bending must be[PDF]

DIN 17100 St52-3 steel plate

Carbon and low alloy steel EN10025 St52-3 steel plate St52-3 steel plate, under DIN17100 standard St52-3 steel plate, under DIN17100 standard, we can regard St52-3 steel plate as Carbon and low alloy steel St52-3 steel plate is one mainly of Carbon and low alloy steel, St52-3 steel plate is alloy steel …

Metals :: Mild Steel (S275, S355 & S460) :: Sheet & Plate

Unit 12b, Devonshire road industrial estate, Millom, Cumbria, LA18 4JS, United Kingdom.

Carbon Steel Plate(Q235,Q345,S235,S355,ST52…

Carbon Steel Plate(Q235,Q345,S235,S355,ST52,A36,SS400,A572) ... Keywords:Steel Plate: Details. Product : Hot rolled Steel Sheet price / steel plate / mild steel plate . Steel Sheet is widely used in various building structure and engineering structure. a.) beam, bridges, ship; b.) …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.