Tel: +86-371-86151827

s355 emz steel steel plate

Steel grade:s355 emz steel steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s355 emz steel steel plate Introduction

s355 emz steel physical properties

s355 emz steel physical properties steel plate is structural steels, used for welding, bolting, and more riveted structure. ... › EN Standard Steel PlateS355 steel plate is a high-strength low-alloy European standard structural steel ... it meets requirements in chemistry and physical properties similar to ASTM ...

S355 Structural Steel & Steel Plate | Murray Steel Products

S355 steel plate and structural sections in stock at Murray Steel Products. Range of processing services available, including profiling, cutting and drilling.[PDF]

S355 European Standard Steel - joostdevree.nl

S355 European Standard Steel S355 EN 10025 : 2004 Standard Structural Steel Plate S355 structural steel plate is a high-strength low-alloy European standard structural steel covering four of the six "Parts" within the EN 10025 – 2004 standard. With minimum yield of …

Comparison of steel grades | Steel plate equivalent grades

Comparison and Steel Plate Equivalent Grades Steels for steel construction: non-alloy structural steels Previous standard Previous steel grade Current steel grade Current standard BS 4360 40 A, B S 235 JR BS EN 10025-2 40 C S 235 J0 40 D S 235 J2+N 43 A, B S 275 JR ...

S355 Structural Steel Plate | Leeco Steel, LLC

leecosteel› …› EN Standard Steel PlateS355 structural steel plates are high strength, low alloy steel plates that cover 4 of 6 categories under the EN 10025:2004 European standard. S355 has excellent usability & is used in almost every facet of structural fabrication. Request a quote today!

S355 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S355 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Offshore steel - stalforbund

which describe the severe requirements on structural steel plates for offshore constructions. The standards prEN 10225, BS 7191 and the material data sheets of NORSOK (Norwegian standard) are primarily applicable in Europe (North Sea).

S355 S355J2 S355J2+N Steel - UK Supplier

S355, S355J2, S355JR, S355J2+N steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S355 is supplied in the hot rolled and cold drawn conditions.

s355 k2g3 steel plate suppliers | S355MC Plates Supplier ...

Triton Alloys Inc. is S355 K2G3 Steel Plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies S355 K2G3 Steel Plate to internationally approved quality standards for applications. S355 K2G3 Steel Plate have excellent quality to fully satisfy customer’s requirements.

Offshore Structural Steel Plate | Steel Grade S355

Offshore & Structural Steel Plate Steel Plate for Offshore structures is Available up to thicknesses of 200mm.The range includes grades and specifications: EN 10025 S355 J2+N, EN 10025 S355 K2+N, C/W -40 Degrees IMPACT TEST, EN10204 3.2 Lloyds.

Beverly Steel - S355G8+N Z35 ; S355G8+M Z35 Steel Plate

We are your projects partner when come to high quality of foods to eat with high cholesterol S355G8+N Z35 and S355G8+M Z35 offshore steel plates in accordance with EN10225 : 2001, with our great breadth of experience, we manage to decode your need and common causes of erectile dysfunction use Cialis want as we are fully experience in supplying offshore steel material in South East Asia Region.

Carbon steel plate - s355nlsteel

Unitedsteelplate supply steel plate in Carbon steel plate ASTM A36,SS400,S235JR,A283GrC,A36,A283GrA,SS 400,A285GrC,A285GrA and so on.

S355EMZ Steel Plate for Offshore Applications | Murray ...

S355EMZ steel plate is available in a wide range of sizes and thicknesses from Murray Steel Products, along with associated processing services, including profiling, cutting and drilling.

S355EMZ Steel Plate for Offshore Applications | Murray ...

S355EMZ steel plate is available in a wide range of sizes and thicknesses from Murray Steel Products, along with associated processing services, including profiling, cutting and drilling.

Carbon steel plate - s355nlsteel

Unitedsteelplate supply steel plate in Carbon steel plate ASTM A36,SS400,S235JR,A283GrC,A36,A283GrA,SS 400,A285GrC,A285GrA and so on.

Regency Steel Asia - Reinforcing your world

Regency Steel Asia (RSA) is a leading global integrated and one-stop steel distributor and service provider with a strong focus on the marine & offshore, energy, shipbuilding and constuction industries, recognised for our reliability, efficiency and commitment to quality.

S355 Structural Steel Plate, S355JR Structural Steel Plate ...

S355 Steel Plate, S355JR Plates, IS 2062 E350 A Structural Steel Sheets Exporter, SAILMA 350HI High tensile Structural Steel Plates Stockist in Mumbai, India. Conquest Steel & Alloys is an exporter of S355 Structural Steel Plates, known for massive strength and competence in hostile conditions.

steel 1 0976 s355 - MS Plates - napmr.org

steel 1 0976 s355, steel,Hot sell steel 1 0976 s355, MS Plates stock in China,China steel 1 0976 s355, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled steel 1 0976 s355, MS Plates in stock each month. We can meet our customer's any quantity request.

Metals :: Mild Steel (S275, S355 & S460) :: Sheet & Plate

Lakeland Steel home page Metals Mild Steel (S275, S355 & S460) Sheet & Plate. Browse by category. Custom cutting Metals Mild Steel (S275, S355 & S460) Sheet & Plate ... Mild steel sheet & plate; Mild steel tread plate checker; S460 Steel sheet & plate; No items found matching the search criteria.[PDF]

S355 S355J2 S355J2+N Steel - West Yorkshire Steel

S355 S355J2 S355J2+N Steel S355, S355J2, S355JR, S355J2+N steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S355 is supplied in the hot rolled and cold drawn conditions. The S355 steel

S355 G9 Steel Plate - tritonalloysinc

Triton Alloys Inc. is S355 G9 Steel Plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies S355 G9 Steel Plate to internationally approved quality standards for applications.S355 G9 Steel Plate have excellent quality to …

EN 10225 grade S355 VL e36 - KATALOR STEEL

S355 steel plate is a high-strength low-alloy European standard structural steel covering four of the six categories within the EN 10025: 2004 standard. ... BS7191 355 N EN 10225 / NORSOK 355EM / EMZ ... E36 / EH36 respectively F40 / FH40) Grade ABS-EH36 ABS-AH40 to FH40 ... [PDF] Carbon Steel Comparison Tabel - Norsk Stål.

Beverly Steel - S355J2+N Steel Plate

S355J2+N High Tensile Steel Plates. S355 – offers high yield and THE BEST WEIGHT LOSS PILLS tensile strength with a minimum yield strength of 355 N/mm² , a structural grade steel which is widely used in engineering and construction industries, ...

S235/s355/s275jr 3mm Carbon Steel Plate Standard Sizes ...

S235/S355/S275Jr 3mm carbon steel plate Standard Sizes Sheet mill test certificate mild steel sheet plate. Steel coil cutting production line. Normally, 1.0-15mm thickness hot rolled steel, original products are steel coil, then will flat and cut into demand sizes.

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

steel s355 jrg3 - MS Plates - napmr.org

steel s355 jrg3, steel,Hot sell steel s355 jrg3, MS Plates stock in China,China steel s355 jrg3, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled steel s355 jrg3, MS Plates in stock each month. We can meet our customer's any quantity request.

EN10025 S275 J2 density - KATALOR STEEL

EN 10025 S275JR steel mechanical property: S275JR steel plate, under EN10025 standard, we can regard S275JR steel plate as low alloy steel. thickness: Structural Steel Plate - S355 J2 +N & S355 K2 +N Stockist of thick Structural Steel Plates to EN10025-2 S355 J2 +N & S355 K2 +N in thicknesses from 50 - 300mm with EN10204 3.2MTC.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.