Tel: +86-371-86151827

low carbon cold rolling steel coil

Steel grade:low carbon cold rolling steel coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

low carbon cold rolling steel coil Introduction

What is Cold-Rolled Steel? - Definition from Corrosionpedia

Corrosionpedia explains Cold-Rolled Steel. Cold-rolled steel contains a low carbon content, and an annealing method makes them softer than hot-rolled sheet. Cold-rolled steel products are commonly produced in sheets, strips, bars and rods. Cold-rolled products are generally smaller than the same products produced by a hot-rolled method.

low carbon 4140 cold rolled steel plate in coil

Special Steels - Carbon Steel, Alloy Steel, Free Cutting, … Low carbon steel. Has good hardening properties, fair machinability. Readily brazed and welded. Alloy 1018 is the most commonly available of the cold-rolled steels. It is generally available in round rod, square bar, and rectangle bar. It has a good combination of all ...

Cold Rolled Steel - EDD Coils Manufacturer from Mumbai

Cold Rolled Steel Cold rolled coil process is done after hot rolled coil process. The steel is processed further in cold reduction mills, where the metal is cooled (at room temperature). The temperature of the metal is below its form temperature. This process is known as Cold Rolling. Advantages. This process increase the strength of the finished product.[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Extra-low-carbon Cold-Rolled Steel Sheets and Coils with excellent deep-drawing workability. Automobile oil pans, high roofs, extra deep drawn parts 2. Special-Purpose Cold-Rolled Steel Sheets and Coils Nippon Steel & Sumitomo Metal’s High-Strength Cold-Rolled Steel Sheets and Coils are classified into the following six

Cold Rolled Steel - Metal Supermarkets

Metal Supermarkets – Steel, Aluminum, Stainless, Hot-Rolled, Cold-Rolled, Alloy, Carbon, Galvanized, Brass, Bronze, Copper Over 80 locations in North America offering instant access to a wide variety of metal types, shapes, sizes and grades.

Cold Rolled Carbon – Olympic Steel

olysteel› ProductsHome / Products / Cold Rolled Carbon Cold Rolled Steel Products We commonly stock commercial quality (CQ), AHSS Advanced high strength steel, drawing steel (DQ), COR-TEN® weathering steel, 1/4 Hard and 1/2 Hard, automotive grades, and more cold rolled steel coil and sheet products.

Home - Cold Rolled Steel | Specialty Strip & Oscillating, Inc.

Specialty Strip & Oscillating, Inc. Founded in 1994; Supplier of conventional slit 5/8" to 48" or slit oscillated prime coils in cold rolled low carbon, high carbon, alloy and stainless; Provides oscillated prime coils of steel with 20 to 25 miles of continuous strip.

Cold Rolled 1008/1010 Steel Physical & Chemical Properties

View the physical and chemical properties of the various cold rolled steel alloys we carry. Don't see something? Request a quick quote and we'll try to get it. ... COLD ROLLED 1008/1010 STEEL Physical & Chemical Properties. Here are the physical and chemical properties of the 1008/1010 carbon steel that we regularly stock. Cold Rolled 1008/1010 ...

Home - Cold Rolled Steel | Specialty Strip & Oscillating, Inc.

Supplier of conventional slit 5/8" to 48" or slit oscillated prime coils in cold rolled low carbon, high carbon, alloy and stainless; Provides oscillated prime coils of steel with 20 to 25 miles of continuous strip. Oscillated coils are continuous, connected by welding and if needed, annealed and ground to gauge.

Cold Rolled Carbon – Olympic Steel

olysteel› ProductsHome / Products / Cold Rolled Carbon Cold Rolled Steel Products We commonly stock commercial quality (CQ), AHSS Advanced high strength steel, drawing steel (DQ), COR-TEN® weathering steel, 1/4 Hard and 1/2 Hard, automotive grades, and more cold rolled steel coil and sheet products.

Big River Steel - Cold Rolled

Cold Rolled. Reducing our hot rolled coils through our continuous pickle line and in-line tandem cold mill (PLTCM) produces cold rolled steels ranging in thickness from .012” – .128” and 36” – 74” in width. Our investment in technology allows us to meet the tight tolerances and surface finishes customers demand in fully processed cold rolled steels.

COLD ROLLED LOW CARBON STEEL STRIPS | Eusider

©2017 Eusider S.p.A. Sede Legale: 20144 MILANO - Via Tortona, 25 Sede Amministrativa e Deposito: 23845 COSTAMASNAGA - Via per Rogeno/Fraz. Brenno della Torre Capitale sociale euro 12.750.000 i.v. - Registro Imprese di Milano n.300191 (Milano) - P.IVA 12125010152 - CF. 09928390153

No. 1 Temper Strip Steel | Precision Steel Warehouse, Inc.

precisionsteel› Low Carbon Steel› Strip SteelGenuine Cold Rolled Strip Steel. The product of modern strip mills to strip steel (not sheet) tolerances. See the sheet and strip tolerance table in the Technical Data section. This temper intended for flatwork and punching only as it has not been annealed after final cold rolling and is very stiff and springy.

Cold Rolled Steel Coil Product Types and Grades

Cold Rolled Steel Coil Supplied by AGICO Cold Rolled steel supplied by AGICO is available in four different product groups ensuring there is a product to meet all your specific manufacturing requirements: Cold-rolled low carbon steel Cold h

Cold Rolled Steel - Metal Supermarkets

Cold Rolled. However, this cannot be said about cold rolled sheet and hot rolled sheet. With these two products, the cold rolled product has low carbon content and it is typically annealed, making it softer than hot rolled sheet. Uses: Any project where tolerances, surface condition, concentricity, and straightness are the major factors.[PDF]

Coil breaks in low carbon steels - ÓBUDAI EGYETEM …

Low carbon steels in hot rolled as well as in cold rolled and annealed state are ... Verő, B., Portász, A.: Coil breaks in low carbon steels Paper 40 Proceedings of 8th International Engineering Symposium at Bánki [PDF] (ISBN: 978-615-5460-95-1), 2016 ... P. E., Prickett, P.: An Investigation of Coil Break Behaviour in Hot Rolled Steel Strip ...

Carbon Steel - Flat Rolled

Electrogalv Carbon Steel. Electrogalv product is produced from Cold Rolled sheet steel that is electrolytically coated with zinc or zinc-alloy. Electrogalv product is available in coating weights up to 100 grams / square meter per side. Product can be ordered to minimum or nominal thicknesses.

Carbon Steel Sheet Stock, Plates, Bars and Coils - Carbon ...

Carbon steel blanks, flats, bars, plates and sheet stock from Grainger come in a variety of widths, lengths and thicknesses for your industrial applications. Select low-steel and mild-steel rectangular or square carbon steel bars in hot-rolled and cold-rolled tempers that are readily brazed or welded, good for screw machining and that offer you excellent ductility.[PDF]

Standard Specification for Steel, Sheet, Carbon, …

A Hot-rolled sheet in coils and cut lengths less than 300 mm. in width must have cut edges. Hot-rolled material with mill edges 300 mm and less in width is considered hot-rolled strip. (2) Hot-rolled high-strength low-alloy steel sheet is com- monly classified by …

SAE1006 SAE1008 Cold Rolled Mild Steel Coil Low Carbon ...

SAE1006 SAE1008 Cold Rolled Mild Steel Coil Low Carbon Steel Sheets Description: Cold rolled coil is produced by pickling hot-rolled coil and rolling it uniformly at an appropriated temperature to a thinner thickness. It has excellent surface configuration and superb mechanical properties for use in automobile and electronic appliance production.

Cold Rolled Carbon Steel Tubing | Middletown Tube Works

Each cold rolled steel tube comes smooth to the touch and readily paintable using essentially any paint system. Available in a wide range of thicknesses and chemistries, cold rolled steel tube is best suited for parts with a fine finish fabricated in a variety of ways: Bending, expansion, penciling, flattening and extreme deep drawing.

High & Low Carbon, HSLA, Stainless Steel Service Center ...

Steel Grades: Cold Rolled, High Carbon, HSLA, Low Carbon, Stainless Steel. Products: Ribbon Coils, Oscillate Coils, Cut Lengths. Processes: Edging, Slitting, Annealing. Request a Quote Now. Siegal Steel maintains a constant inventory of steel grades most commonly used by our customers as referenced below. The strategic alliance established with ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.