Tel: +86-371-86151827

2b surface stainless steel sheet plate for housewares

Steel grade:2b surface stainless steel sheet plate for housewares

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

2b surface stainless steel sheet plate for housewares Introduction

[PDF]

Stainless Steel – Surface Finishes - Stealth 316

Stainless Steel – Surface Finishes Introduction Surface finish is an important element in any specification of stainless steel regardless of the intended use. For those applications where appearance is important, finish is a design element and must be specified. In non-decorative applications the surface …[PDF]

Guide to Stainless Steel Finishes

GUIDE TO STAINLESS STEEL FINISHES 3 1D Hot rolled and annealed, and with the mill scale removed, this surface condition is classified as a 1D finish. This surface, which is found on thicker sheets and plate, is slightly coarse with very low reflectivity. It is primarily used for non-decorative purposes where the visual appearance is less ...

2B, 2D and BA Cold Rolled Finishes

What Are Cold Rolled finishes?[PDF]

Roughness measurements of stainless steel surfaces

Roughness measurements of stainless steel surfaces Introduction Ra value Surface roughness is a measure of the texture of a surface. It is quantified by the vertical deviations of a real surface from its ideal form. If these deviations are great, the surface is rough, if they are small, the surface is smooth. Roughness is typically considered to

2b surface 201 stainless steel plate - alibaba

Alibaba offers 1,949 2b surface 201 stainless steel plate products. About 90% of these are stainless steel sheets. A wide variety of 2b surface 201 stainless steel plate options are available to you, such as aisi, astm, and jis.

316L Stainless Steel Sheet 2B surface 316 Stainless Steel ...

TISCO 316L stainless steel sheet 2B surface , SS 316l sheet / plate we are the agent of TISCO, we can supply 316L stainless steel sheet, stainless steel plate, stainless steel pipe, stainless steel bars and so on. stainless steel sheet is our main products, we have large quantity products in stock. Details about our stainless steel sheet products:

304 Stainless Steel 2B Finish | Stainless Supply

304 stainless steel 2B finish is a mill finish, which is smooth and NOT the brushed finish commonly seen on kitchen appliances. 304 stainless steel 2B finish is light gray in color. 304 stainless steel 2B finish may or may not have a protective film on one side to prevent scratching.

2B plate surface quality - MS Plates - napmr.org

2b Surface Steel Sheet, 2b Stainless Steel Plate, Stainless Steel manufacturer / supplier in China, offering High Quality Stainless Steel Sheet 321, Carbon Steel Plate ASTM A36, En10025 Carbon Steel Sheet Price Per Kg S355jr and so on. Best quality color coated 2B Surface Stainless Steel Sheet .

2B plate surface quality - MS Plates - napmr.org

2b Surface Steel Sheet, 2b Stainless Steel Plate, Stainless Steel manufacturer / supplier in China, offering High Quality Stainless Steel Sheet 321, Carbon Steel Plate ASTM A36, En10025 Carbon Steel Sheet Price Per Kg S355jr and so on. Best quality color coated 2B Surface Stainless Steel Sheet .

2B BA Surface Finish Stainless Steel Plate

2B/2D Sheet- Over 25 grades stainless steel in stock | … Stainless Steel Plate Mill Plate: Stainless Steel Grades, Thicknesses and Widths Stainless Steel Sheet Polishing Penn Stainless can polish nearly any stainless steel plate item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless plates …

What's the difference of Stainless steel 2B and BA plate ...

Among the market and contract,for example,if we talk on 304 stainless steel sheet size 1x1219x2438mm,unless otherwise specified,its surface is 2B. What is BA surface and what's the difference of Stainless steel 2B and BA plate finish? However we always heard for another surface …

2B BA Surface Finish SUS310S Stainless Steel Plate

Ba Finish Stainless Steel Plate 304 , Find Complete Details about Ba Finish Stainless Steel Plate 304,Stainless Steel Plate,2b Surface Stainless Steel Plate . SSINA: Stainless Steel: Finishes. No. 2B Finish is a bright No. 4 finish sheet in an oil and abrasive medium. This finish is sometimes seen on stainless steel architectural

AISI 201 2b Surface Stainless Steel Metal Plate/Sheet

Stainless Steel Sheet, Stainless Steel Plate, Polished Stainless Steel Plate manufacturer / supplier in China, offering AISI 201 2b Surface Stainless Steel Metal Plate/Sheet, Incoloy 800 High Temperature Alloy Cold-Rolled / Hot-Rolled Steel Sheet/Strip / Coil / Wire, Nickel Alloy Incoloy 800h Nickel Alloyuns N08810 Coil / Belt / Strip/Round and so on.

2b Stainless Steel Plates, 2b Stainless Steel Plates ...

Alibaba offers 71,194 2b stainless steel plates products. About 87% of these are stainless steel sheets, 1% are dishes & plates. A wide variety of 2b stainless steel plates options are available to you, such as jis, aisi, and astm.

AISI 316 surface 2B Stainless Steel Plate

Buy AISI ASTM 201 2B Surface Stainless Steel Metal Plate/Sheets . Buy AISI ASTM 201 2B Surface Stainless Steel Metal Plate/Sheets Made In China, Find 201, 202, 301, 321, 304, 304L, 316, 316L, 309S, 310S, 410, 430, etc. Characteristics of Food Contact surface materials: stainless steel.

316L Stainless Steel Sheet 2B surface 316 Stainless Steel ...

TISCO 316L stainless steel sheet 2B surface , SS 316l sheet / plate we are the agent of TISCO, we can supply 316L stainless steel sheet, stainless steel plate, stainless steel pipe, stainless steel bars and so on. stainless steel sheet is our main products, we have large quantity products in stock. Details about our stainless steel sheet products:[PDF]

Roughness measurements of stainless steel surfaces

Roughness measurements of stainless steel surfaces Introduction Ra value Surface roughness is a measure of the texture of a surface. It is quantified by the vertical deviations of a real surface from its ideal form. If these deviations are great, the surface is rough, if they are small, the surface is smooth. Roughness is typically considered to

No. 2B Mill Finish Stainless Steel & Plate | Penn ...

No. 2B Mill Finish Stainless Steel & Plate. No. 2B Finish is a bright cold rolled finish, produced very similarly to the No. 2D finish.. The difference in the production lies in the final light cold rolling pass of a No 2B Finish, that is is done using polished rolls.

316L Stainless Steel Sheet 2B Mill Finish | Stainless Supply

316L stainless steel sheet 2B finish has a mill finish, which is smooth and NOT the brushed finish commonly seen on kitchen appliances. Our 316L stainless steel sheet 2B finish will not have a protective film to prevent scratching, so the 316L stainless steel will commonly have scratching (not gouging) from when it is cut to size, fabricated, shipped, etc.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning

4*8 1.4301 Stainless Steel Sheet in Stainless Steel Stock ...

Stainless Steel, Stainless Steel Plate, Stainelss Steel Coil manufacturer / supplier in China, offering 4*8 1.4301 Stainless Steel Sheet in Stainless Steel Stock with 2b Surface, Alloy Construction Steel Bar in 4135 4140 34CrMo4 42CrMo4 with Good Quality, 6063 …

China AISI 304 Stainless Steel Plate Cold Rolled 2mm ...

Stainless Steel Sheet, Stainless Steel Plate, Stainless Steel Coil manufacturer / supplier in China, offering AISI 304 Stainless Steel Plate Cold Rolled 2mm Thickness with 2b Surface, ASTM Stainless Steel Seamless Pipe/Tube with Bright Mirror Polished Finish, Corrosion Resistance Super Duplex Stainless Steel 2507 Perforated Metal Sheet Plate and so on.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.