Tel: +86-371-86151827

hot rolled en10025 4 s355m steel plate

Steel grade:hot rolled en10025 4 s355m steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot rolled en10025 4 s355m steel plate Introduction

[PDF]

EN10025-4 | Steel Plate, Steel Bar, Steel Tubes Supplier

Part 4: Technical delivery conditions for thermomechanically rolled weldable fine grain structural steels EN10025-4 is Standard specifies Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.EN10025-4 Standard main steel grade: S275M, S355M, S275ML, S355ML,

s355m steel - MS Plates - napmr.org

s355m steel , steel,Hot sell s355m steel , MS Plates stock in China,China s355m steel , MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled s355m steel , MS Plates in stock each month. We can meet our customer's any quantity request.

S355ML EN10025-4 S355ML steel plate - steelspecs

S355ML Mechanical properties at ambient temperature for thermo mechanical rolled steel. Grade. Thickness. Yield Strength. Tensile Strength. Elongation. Impact Energy (mm) MPa (min) MPa ... EN10025-4,S355ML,S355ML steel,S355ML steel grade,S355ML steel plate. Tags: ... S355M EN10025-4 S355M steel plate » ...

S355M,S355ML ,S420M, S420ML, S460M, S460ML, Steel …

EN 10025-4 steel grade is for thermo mechanical rolled weldable fine grain structural steel in S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M and S460ML steel plate.

EN10025-4 - Bebon steels

EN10025-4 is Standard specifies Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.EN10025-4 Standard main steel grade:S275M,S355M,S275ML,S355ML,S420ML,S420M,S460M,S460ML and so on.

EN10025-4 S355M| S355M steel plate__Steel Supplier

Normalized rolled weldable fine grain structural steels . Gangsteel is specialized in supplying EN10025-4 steel plate in S355M. For more information of S355M steel plates, please check them in following: Chemical composition % of the Product analysis of grade S355M (1.8823)

EN10025 4 S420ML hot rolled steel plate - braunjp

EN10025-4 - Bebon steels. EN10025-4 is Standard specifies Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.EN10025-4 Standard main steel grade:S275M,S355M,S275ML,S355ML,S420ML,S420M,S460M,S460ML and so on.

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

EN 10025 Hot rolled products of structural ... - Steel Number

Steel and Cast Iron Standards EN 10025: Steel grades /numbers. EN 10025-1: 2004 Hot rolled products of structural steels. ... 1.8823 S355M 1.8825 S420M 1.8827 S460M ... EN 10025-4: 2004 Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

steel plates S355ML - MS Plates - napmr.org

Steel Plate EN10025-4 Grade S275M S355M S275ML S355ML . ... S355ML Hot Rolled Steel Plate . EN 10025-4 S355ML steel is thermomechanical rolled weldable fine grain structural steel. S355ML steel is delivered in hot rolled condition. S355ML hot rolled steel plate is of high quality. Grades and Quality: S is short for Structural Steel. 355 means ...

EN10113 S355M steel plate - BEBON INTERNATIONAL

EN10113 S355M steel plate/sheet,EN10113 S355M steel plate/sheet, under EN standard, we can regard S355M steel plate/sheet for Fine-grain structural steels, thermomechanically rolled steel.. EN10113 S355M is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.S means the structural steel, M means the delivery condition.The EN10113 S355M steel …

Give You Our Best Carbon Steel Plate EN10025 4 S275M low ...

seamless pipeline pipe - A36 steel plate stocks in china. Cold Rolled Hot Dip alloy Steel ... EN10025-4:S275M,S275ML,S355M,S420ML ... ERW Steel Pipe. Electric Resistance Welded Steel Pipe. Usage: Used for low pressure ... Mild Steel Sheet china angle bar ... - steellivestock. BBN steel offer all kinds of weathering steel,carbon and low alloy ...

Steel Plate EN10025-4 Grade S275M S355M S275ML …

Steel Plate EN10025-4 Grade S275M S355M S275ML S355ML S420ML EN10025-4 S460M S460ML in Large Stock. Mechanical and chemical properties of EN10025-4 S275M Chemical composition % MAX C Si Mn P S Nb V Al Ti Cr Ni Mo N 0.15 0.55 1.6 0.035 0.03 0.06 0.1 0.

S355M EN10025-4 S355M steel plate - steelspecs

S355M steel plate. S355M Grade is a technical delivery conditions for thermo mechanical rolled weldable fine grain structural steels. S means the structural steel, M means the delivery condition. Capital letter L for the quality with specified minimum values of values of …

Give You Our Best Carbon Steel Plate EN10025 4 S275M …

seamless pipeline pipe - A36 steel plate stocks in china. Cold Rolled Hot Dip alloy Steel ... EN10025-4:S275M,S275ML,S355M,S420ML ... ERW Steel Pipe. Electric Resistance Welded Steel Pipe. Usage: Used for low pressure ... Mild Steel Sheet china angle bar ... - steellivestock. BBN steel offer all kinds of weathering steel,carbon and low alloy ...

What is the ASTM equivalent of EN10025 S355JR and …

What is the ASTM equivalent of EN10025 S355JR and 275JR? steel plate Leave a Message Get a price EX-Stock Promotion Center EN 10025 S355JR /JO is comes under "structural steel" catagories.

EN 10025-4 S355M|S355M steel plate__Steel Supplier

Gangsteel is specialized in supplying EN10025-4 steel plate in S355M.For more information of S355M steel plates, please check them in following: Chemical composition % of the Product analysis of grade S355M (1.8823). Nominal thickness form 16to 40(mm) CEV max = 0.39

s355m steel - Mild Cold Rolled steel plate

EN10025-4 S355M steel round bar is a hot rolled structural steel product.EN10025-4 S355M steel round bar, delivery status "M" represents hot mechanical rolling, including accelerated cooling with tempering or no tempering (including self-tempering), but ... EN10025-4 S355M Steel Plate are used in Construction of Bridges, Highway Construction ...

EN10025-4 S355M (1.8823) Structural Steel Grade Description

S355M is a high-strength and low-alloy European standard structural steel, EN10025-4 S355M (1.8823) is commonly supplied in the as rolled condition, and it is widely used in the construction, manufacturing and offshore industries.. Mechanical property for S355M Structural steel:

Grade S890QL Hot Rolled Steel Plate EN10025 Standard 6 ...

Hot Rolled Grade S890QL Quenched and Tempered Structural Steel EN10025 Standard . EN10025 S890QL Extra High Strength Steel Plate. S890QL is an extra high strength steel to EN10025-6:2004 and the steel number is 1.8983.

EN10025-4 S460ML Offshore Steel Plates | S460ML steel ...

An ISO 9001:2008 certified company, Victor Steel is a wide range of EN10025-4 S460ML Offshore Steel Plates manufacturer in Mumbai,Maharashtra.Our focus is on providing customers with high end steels that are not rolled or stocked locally. The plates can be supplied straight from stock, cut to size, or profiled to specific shapes. EN10025-4 S460ML steels plates are thermomechanical rolled ...

steel s355m - Mild Cold Rolled steel plate

EN10113 S355M - BEBON steel - steel-plate-sheet. EN10113 S355M is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.S means the structural steel, M means the delivery condition.The EN10113 S355M steel is equivalent to SEW TStE355TM,NFA E355R and ASTM A572GrC steel grade

S355M,S355M PLATE,S355M STEEL - BBN Steel

Structural steel plate S355M is one steel grade in steel standard en 10025-4.Comparing with steel plate S275M,S355M steel plate owned a higher steel strength including its yield strength and tensile strength.The minimum yield point of S355M steel plates is 355 Mpa,and tensile strength within 470-630 Mpa.For chemical composition,S355M low alloy steel plates contains a higher V and Ni than steel ...

EN10113 S355M steel plate - BEBON INTERNATIONAL

EN10113 S355M steel plate/sheet,EN10113 S355M steel plate/sheet, under EN standard, we can regard S355M steel plate/sheet for Fine-grain structural steels, thermomechanically rolled steel.. EN10113 S355M is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.S means the structural steel, M means the delivery condition.The EN10113 S355M steel …

EN10025-4 S355M Carbon and Low-alloy High-strength Steel ...

EN10025-4 S355M Carbon Structural Steel Plate,EN10025-4 S355M High Strength Structural Steel Plate,EN10025-4 S355M Carbon Steel plate,EN10025-4 S355M Structural Steel Plate.,EN10025-4 S355M Steel Plate are used in Construction of Bridges, …

EN10025-4 - steel-plate-sheets

en10025-4 Main Application: Carbon and Low-alloy High-strength Steel Plate is Widely Used In Construction of Bridges, Riveted, Bolted, And Other Structural Elements Included Drilling Machine, Power Shovel, Electricity Drive Wheel Counter- Mine Trolley, Mineral Product Automobile, Excavator, Car …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.