Tel: +86-371-86151827

free samples 5cr8mo2vsi steel base plate

Steel grade:free samples 5cr8mo2vsi steel base plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

free samples 5cr8mo2vsi steel base plate Introduction

Steel Design Examples - Engineering Examples

A W10 x 49 column is supported by a concrete pier whose top surface is 19 inches x 19 inches. Design a base plate given that the column dead load is 100 kips and live load is 150 kips. Base plate material is A36 steel and concrete compressive strength is 3 ksi. Code used: AISC Steel …[PDF]

pl LRFD ASD - Structural Engineering Software

B.5.2 Example: Large Moment Base Plate Design, Triangular Pressure Distribution Approach Design the base plate shown in Figure B.4 for an ASD and LRFD required strength of 60 and 90 kips, respectively, and moments from the dead and live loads equal to 480 and 720 kip-in., respectively. The ratio of the concrete to base plate area (A2/A1) is 4.0 ...

Base Plate Design Metric Units - Online Structural Design

column baseplate design metric units in accordance with Eurocode 3, EN 1993 ... SAMPLE CALCULATION Project Title: Base plate calculation interactive online spreadsheet Calc. By Date Rev. ... Steel base plate characteristics Steel grade ...[PDF]

Aisc Steel Connection Design Spreadsheet

"Steel Column Base Plate Design," Engineering Journal, AISC, Vol. 10, No ... a shear connection to the face of the ... Design of Bolted End-Plate Beam-to-Column Connections

Column Base Plate Design - Column Design Samples

Column Base Plate Design - Column Design Samples. ... steel column base plates and anchor bolts, aspects like distribution of load on larger area of material; easy, economical and available fabrication; type of steel to be used; etc. are given due importance. Below are some column design samples for review. For queries, please feel free to ...[PDF]

Base Plate and Anchor Rod Design - Texas A&M University

14/DESIGNGUIDE1,2NDEDITION/ BASE PLATE AND ANCHOR ROD DESIGN For example, in statically loaded structures, if the strength is much larger than the demand, the ductility is not necessary and it is acceptable to design with the limit state of tensile or shear strength of the anchor rod group governing the design.[PDF]

Base Plate and Anchor Rod Design - Construcción en Acero

2 / DESIGN GUIDE 1, 2ND EDITION / BASE PLATE AND ANCHOR ROD DESIGN The vast majority of building columns are designed for axial compression only with little or no uplift. For such col-umns, the simple column-base-plate connection detail shown in Figure 1.1 is sufficient. The design of column-base-plate[PDF]

Aisc Steel Connection Design Spreadsheet

"Steel Column Base Plate Design," Engineering Journal, AISC, Vol. 10, No ... a shear connection to the face of the ... Design of Bolted End-Plate Beam-to-Column Connections

DWG Sample file Free Download Steel, Concrete and Timber

Steel Structure Drawing Sample. Different steel structural member drawing CAD/DWG File. Sample drawing which can be used as a reference. Viewable in auto CAD2007 or upper version. Almost all type of steel members drawing are available. Some of the steel connection details, base plate details & typical steel structure section including portal frame.[PDF]

Bolts, welds, column base - Eurocodes

Bolts, welds, column base František Wald Czech Technical University in Prague . Eurocodes - Design of steel buildings with worked examples Brussels, 16 - 17 October 2014 Motivation To present o Content/principles ... o Base plate and concrete in compression o Base plate in …[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;

Sample Request | SlipNOT®

SAMPLE REQUEST. REQUEST FORM. Company Name: * Name * First Last. ... All samples are drop pieces from miscellaneous jobs that vary in size and shape. Specific samples may be requested, however, the intention of sending samples is to see the SlipNOT surface. ... Steel Grip Plate® ...

MX Metal Sample Request - Elite Garage Floors

Please fill out below form for a free sample of our wall base metal, or for quote only. We will process your request by the next business day. For E-Mail Quote Only: We will e-mail you an estimate. For sample request we mail our sample packets by regular USPS mail only. We mail samples to U.S., or Canada Address only.[PDF]

DESIGN EXAMPLES Version 13

i.-1. PREFACE The AISC Design Examples CD provides examples on the application of the 2005 AISC Specification for Structural Steel Buildings (ANSI/AISC 360-05) and the AISC Steel Construction Manual, 13th Edition. The examples found herein illustrate how the Specification and Manual can be used to determine solutions to common engineering

Cove Base Molding Stainless Steel - TheCornerGuardStore

Note about 8 foot corner guards: As of Jan 1, 2018 both UPS and FedEx have implemented a $60 surcharge of any shipments 8 feet and over. For all of our metal products we have created 94” corner guards so that when packaged they are under the 8 foot (96”) total.

Stainless Steel & Aluminum Base Molding - Institutional

Metal base molding is perfect for projects that require a little extra flare. Made from real metal, our base molding is available in brushed aluminum, stainless steel, natural diamond plate and even colored diamond plate base molding.

ST03.0 - Steel Base Plate Details WF Columns | AxiomCpl ...

ST03.0 - Steel Base Plate Details WF Columns. ... Steel Base Plate Details WF Columns: Steel base plate details in AutoCAD format showing wide flange columns and base plate configuration with anchor bolt holes. ... See Free Samples zip Downloads page for quick download.

MX Stainless Steel | Aluminum Base Molding Wall Base ...

MX Metal Wall Base Elite Xpressions, Stainless Steel, Aluminum Wall Base, comes in brushed, and diamond plate, anodized options. Custom metal wall base, made in USA. Free Samples.

excelcalcs - BASEPLT9.xls

BASEPLT9.xls This Excel calculation can be downloaded by ExcelCalcs subscribers.Please login or Subscribe. Description: "BASEPLT9" is a spreadsheet program written in MS-Excel for the purpose of analysis of steel column base plates. Specifically, wide flange column base plates may be subjected to axial loads (compression or tension), with or ...

MetalsDepot® - Buy A36 Steel Plate Online!

Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications.. Specifications: ASTM A36, AISI A-36 ; Applications: base plates, gussets, liners, road plates, trench covers, etc. Workability: Easy to Weld, Cut, Form and Machine[PDF]

Steel Structures Design Manual to AS 4100 V1 - …

Steel Structures Design Manual To AS 4100 First Edition Brian Kirke ... 3.2.7 Sample Calculation of Dead Load for a Steel Roof 19 3.2.7.1 Dead Load on Purlins 20 3.2.7.2 Dead Load on Rafters 21 ... 9.4.1.5 Column Pinned Base Plate 187 9.4.2 Rigid Connections 189 9.4.2.1 Fixed Base Plate 189 ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.