Tel: +86-371-86151827

1250mm en10088 2 1 4028 stainless steel plate

Steel grade:1250mm en10088 2 1 4028 stainless steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

1250mm en10088 2 1 4028 stainless steel plate Introduction

BBN Steel Supply 1250mm en10088 2 1 4362 stainless plate ...

We will give you the 1250mm EN10088 2 1 4028 stainless steel plate, pressure vessel steel plate grades plate competitive price, 1250mm EN10088 2 1 4028 stainless steel plate, pressure vessel steel plate grades plate good quality and best service from us.

EN 10088-2 Chemical Composition Stainless Steel

EN 10088-2 Chemical Composition Stainless Steel. EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. A total of 83 stainless steel grades are listed, including 19 ferritic, 14 martensitic, 2 precipitation hardening, 40 austenitic and 8 austenitic-ferritic duplex grades. The chemical composition of these stainless steel are shown in this article.

X30Cr13 / 1.4028 Martensitic stainless steel - equivalent ...

EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes: ... Chemical composition % of steel X30Cr13 (1.4028): EN 10088-2-2005. Tighter carbon ranges may be agreed at the time of enquery and order[PDF]

Stainless Steel – EN Standards for Plate - Stealth 316

Stainless Steel – EN Standards for Plate abc ... replaced by 1.4301 ♦ EN 10088-2 states that Class A thickness tolerances shall normally be produced ♦ EN 10028-7 states that the normal thickness ... Stainless Steel Grades, Compositions & Typical Mechanical Properties

en 10088-1 stainless steel - Mild Cold Rolled steel plate

supplier of x46cr13 en 10088 1,A36,Q235B,Q345B steel plate . EN 10088-1 Stainless Steel -Part 1 : List of Stainless Steel (not for ordering) Part 1 is a new idea, a reference list of 83 stainless steel, giving chemical composition, various physical properties , including density and a general description of the various classes of stainless steel.[PDF]

Stainless Steel: Tables of Technical Properties

Care was taken to include as much information as possible about stainless steel flat products used throughout Europe, for the informatio n of the user: • Chemical and physical properties are in accordance with EN 10088-1:2005 • Mechanical properties are in accordanc e with EN 10088-2:2005, except for he at resisting grad es (EN 100 95:1999)

compare material ss 430 with en 10088-1 - MS Plates

EN 10088-1 X17CrNi6-2 Stainless steel is a kind of martensitic and precipitation hardening Stainless Steel material. EN 10088-1 X17CrNi6-2 Stainless steel is mainly used for food and beverage industries, chemical processing, petrochemical, sanitary, dairy, evaporators, condensers,heat exchangers, feedwater heaters,rubber, plastics, pulp and

Chemical composition of stainless steel flat products for ...

Nov 13, 2014· Chemical composition of stainless steel flat products for general purposes to BS EN 10088-2 Introduction. BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. A total of 97 stainless steel grades are listed, including 25 ferritic, 14 martensitic, 2 precipitation hardening, 44 austenitic and 12 ...

en 10088-1 stainless steel - Mild Cold Rolled steel plate

supplier of x46cr13 en 10088 1,A36,Q235B,Q345B steel plate . EN 10088-1 Stainless Steel -Part 1 : List of Stainless Steel (not for ordering) Part 1 is a new idea, a reference list of 83 stainless steel, giving chemical composition, various physical properties , including density and a general description of the various classes of stainless steel.

BBN Steel Supply mill edge en10088 2 1 455 stainless plate ...

We will give you the mill edge EN10088 2 1 4432 stainless steel plate, pressure vessel steel plate grades plate competitive price, mill edge EN10088 2 1 4432 stainless steel plate, pressure vessel steel plate grades plate good quality and best service from us.[PDF]

Stainless Steel – EN Standards for Plate - Stealth 316

Stainless Steel – EN Standards for Plate abc ... replaced by 1.4301 ♦ EN 10088-2 states that Class A thickness tolerances shall normally be produced ♦ EN 10028-7 states that the normal thickness ... Stainless Steel Grades, Compositions & Typical Mechanical Properties

stainless en 10088 2 en 1 4003 - Mild Cold Rolled steel plate

stainless en 10088 2 en 1 4003, steel,Hot sell stainless en 10088 2 en 1 4003, Mild Cold Rolled steel plate stock in China,China stainless en 10088 2 en 1 4003, Mild Cold Rolled steel plate factory. Keeps more than 10,000 tons hot rolled and cold rolled stainless en 10088 2 en 1 4003, Mild Cold Rolled steel plate in stock each month.

France AFNOR 1.4028, Martensite steel, NF EN 10088-1, NF ...

This page cover the Mechanical Properties, Chemical Element, Cross Reference of France AFNOR 1.4028 steel grade, Application Open die steel forgings for general engineering purposes - Part 4: Stainless steels, Related specifications NF EN 10088-1, Related specifications NF EN 10088-2, Related specifications NF EN 10088-3, Related specifications NF EN 10151, Related specifications NF EN …

Stainless Steel - Grade EN 10088-2

Stainless Steel EN 10088-2 The Rolf Engg. Solutions Inc. is the spectrum of trading, stockholding and manufacturing activities in Stainless Steel Carbon Steel, nickel Alloy, Alloy Steel, Titanium, Monel, Inconel, Hastalloy in the form of sheet, plate, fittings and coils.

1.4028 Stainless Steel Plate, 1.4028 Stainless Steel Plate ...

Alibaba offers 177 1.4028 stainless steel plate products. About 40% of these are stainless steel sheets. A wide variety of 1.4028 stainless steel plate options are available to …

EN 10088-2: 2005 Stainless steels - Steel Number

EN 10088-2: 2005 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes - compare properties of 83 grades

Dura 420/4021 EN 1.4021, ASTM TYPE 420 stainless steel ...

Dura 420/4021 EN 1.4021, ASTM TYPE 420 stainless steel grade details. Help us make Steel Finder better! Open survey Later Never Click. Settings Narrow steel details by ... EN 10088-2: 1.4021: EN 10088-3: 1.4021: EN 10088-4: 1.4021 . Contact us. Contact us to discuss your needs in detail and request for an offer. In addition to advice on ...

Article: Stainless Steel Grades Datasheets

The Stainless Steel Advisory Service receives requests for datasheets for individual steel grades. Rather than create a new set of datasheets, it has been decided to make use of the excellent datasheets which already exist. ... Datasheets for Flat Products Based on EN 10088-2. ... 1.4028. 420. S42000 . 420S45 . AP . X39Cr13. 1.4031. 420. S42000 ...

1.4028 Stainless Steel Sheet Wholesale, Stainless Steel ...

Alibaba offers 82 1.4028 stainless steel sheet products. About 64% of these are stainless steel sheets, 32% are stainless steel strips, and 1% are steel sheets. A wide variety of 1.4028 stainless steel sheet options are available to you, such as astm, aisi, and din.

China En10088 1.4003 Stainless Steel Plate - China En1 ...

Tianjin TEDA Ganghua Trade Co., Ltd. En1.4003 Stainless Steel Sheet, En1.4003 No. 1 Stainless Steel Plate, En1.4003 No. 1 Steel Plate manufacturer / supplier in China, offering En10088 1.4003 Stainless Steel Plate, Bulk Micron Thickness Aluminum Foil, Micron Aluminum Foil and so on.

EN 10088-2 1.4006, 1.4021, 1.4028, 1.4031, 1.4034, 1.4037 ...

EN 10088-2 1.4006, 1.4021, 1.4028, 1.4031, 1.4034, 1.4037 stainless steel sheet . Standard EN 10088-2, hot and cold rolled steel sheet, plate, strip, coil ...

BS EN 10088-1:2005 - Stainless steels. List of stainless ...

BS EN 10088-1:2005 Stainless steels. List of stainless steels Status : Revised, Withdrawn ... Annexes to this standard give guidance data on some physical properties, information on the classification of stainless steel grades, emperical formulae for steel grade classification by microstructure, and a matrix to show which steels are included in ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.