Tel: +86-371-86151827

hot rolled steel plate lifting magnets for constrcution

Steel grade:hot rolled steel plate lifting magnets for constrcution

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot rolled steel plate lifting magnets for constrcution Introduction

[PDF]

How to choose and use lifting magnets - W. W. Grainger

The rectangular lifting magnet is built with either of two basic magnetic circuits, the two-pole or three-pole circuit, and it also can be permanent or electro. Pole plate and core material will be hot rolled steel or low carbon steel. For the plates of rectan-gular lift magnets hot rolled steel plate is welded and joined into the required box ...

Lifting Magnets - Shields Magnetics Inc.

Use the Model SLM EZ-LIFT lifting magnets to move plate steel, block or round steel, and iron material in your shop. Our super-powerful lifting magnet requires no electricity. This magnet lifter is perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc. Lifting Magnets Rated for up to 4,400 lbs!

PLATE HANDLING MAGNET SYSTEMS - permadur

permadur› ProductsUtilizing the performance and safety features of the Permadur Lifting Magnets, these steel plate handling systems can be manned with a single operator as well as handle a single plate off of a stack. All of which can significantly increase your material handling efficiency.Location: 186 US Highway 206, Hillsborough, NJ

Plate & Sheet Material Handling for Cutting Tables - Permadur

permadur› MULTIPLE PART HANDLING MAGNET SYSTEMSReduced material handling time results in increased Torch “ON” Time, which means higher productivity and lower costs for both Steel Fabricators and Steel Service Centers. Magnet Systems can help you to decrease hours of physical labor, reduce handling time, all while performing in …Location: 186 US Highway 206, Hillsborough, NJ

Below-the-Hook Lifting Magnets - Lifting Magnets and ...

Use a lifting magnet individually or in series with a spreader beam. A rare earth magnet can help reduce the chance of dropping a load due to a power failure and can be used on both flat and round surfaces. Help easily handle steel plates, billets, blocks, containers and more with below-the-hook lifting magnets at …

Industrial Heavy Lifting Magnets | Walker Magnetics

These large industrial lifting magnets contain the highest quality rare earth neodymium magnetic material for smooth and easy magnetic lifting. NEO SERIES Permanent lifting magnets for flat and round material handling commonly used in steel supply, machine, and die shops where heavy steel objects must be moved quickly and safely.

For Steel Sheets Magnetic Lifter 5 Ton Sheet Metal Lifting ...

For Steel Sheets Magnetic Lifter 5 Ton Sheet Metal Lifting Magnets , Find Complete Details about For Steel Sheets Magnetic Lifter 5 Ton Sheet Metal Lifting Magnets,Electro Magnet 220v,Steel Plate Lifting Magnets,Electromagnetic Magnets from Magnetic Materials Supplier or Manufacturer-Henan Hengtai Hoisting Equipment Co., Ltd.Price: 7200

Round Lifting Magnets | Magnetool

Round Lifting Magnets. Round Lifting Electromagnets are intended to lift solid, compact material such as billets, steel plate, bars, forgings, etc. Standard units are not intended for handling scrap or small parts. Can be used individually or in multiples on a spreader bar. Consult factory for these applications.

Lifts - Industrial Magnetics, Inc. - Industrial Magnet ...

Permanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slings or chains. One person can perform operations previously calling for …

Below-the-Hook Lifting Magnets - Lifting Magnets and ...

Use a lifting magnet individually or in series with a spreader beam. A rare earth magnet can help reduce the chance of dropping a load due to a power failure and can be used on both flat and round surfaces. Help easily handle steel plates, billets, blocks, containers and more with below-the-hook lifting magnets at …

PLATE HANDLING MAGNET SYSTEMS - permadur

permadur› ProductsUtilizing the performance and safety features of the Permadur Lifting Magnets, these steel plate handling systems can be manned with a single operator as well as handle a single plate off of a stack. All of which can significantly increase your material handling efficiency.

Round Lifting Magnets | Magnetool

Round Lifting Magnets. Round Lifting Electromagnets are intended to lift solid, compact material such as billets, steel plate, bars, forgings, etc. Standard units are not intended for handling scrap or small parts. Can be used individually or in multiples on a spreader bar. Consult factory for these applications.

Steel Plate Lifting Magnets Manufacturer, Steel Plate ...

Plate Magnets for Lifting Steel Purposes offered can be made available in different construction, finish choices and provide support as lifting magnets that are used in a wide range of applications involving electro-permanent, battery powered permanent and electromagnetic technologies.

cutting sheet steel plate fixed hook ,helical blade and ...

If you have questions regarding the scope of Manufacturer preferential supply hot rolled or welded h beam steel h beam (china biggest manufacturer), please feel free to reach out to BBN steel, please feel free to contact us, our email is [email protected] If you have demand of steel machining parts, steel work, steel structure, steel cutting parts, etc, please feel free to contact with us.

steel plate,steel pipe,steel coil - kouhpayesteel

Hot Sale Manual Lifting Hand Winch with Brake(id:9456927 ... Hot Sale Manual Lifting Hand Winch with Brake Product Description Mini hand winch is easy to use, easy to carry and widely used. It can be used in industry, mine, agriculture, electricity, construction of … Boat Winches | eBay. ebay.au› …›

Lifting Magnets | Limited Lifetime Warranty | & Magnetic ...

Lifting Capacity - Armstrong Lifting Magnets have lifting capacity from 330 lbs up to 4,400 lbs for flat and round loads, such as plates, slabs, billets, tubes and more. Keep in mind that there are many factor that can affect their maximum rated lifting capacity, i.e. flat load thickness, surface smoothness, carbon content in steel plate ...

Steel Lift Magnets, Pick and Place, Lifting steel products

These compact yet powerful Rare Earth lift magnets can be used on flat or round surfaces and contain an internal release on/off device that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts eliminate the fear of dropping the load being lifted due to power failures.

Steel Plate Lifter | Products & Suppliers | Engineering360

globalspec› PRODUCTS & SERVICESDescription: IMI’s new BasicLift™ Magnet is a powerful, no frills permanent ceramic lift magnet perfect for basic, flat steel lifting applications. Featuring a lightweight and durable Stainless Steel design, the BasicLift has a full width cam to release the magnet from Maximum Load Capacity: 0.2000 to …

Understanding lift magnet compliance - The FABRICATOR

thefabricator› Article› Materials HandlingThe American Society of Mechanical Engineers has established compliance standards for the use of permanent and electric-rated lifting magnets and the operators of those magnets. Familiarizing shop floor personnel with these guidelines builds a solid foundation for keeping employees safe as they move sheet metal and plate.

steel plate / sheet, carbon steel plates- Katalor

hot rolled steel sprite coil plate; cold rolled coated corrugated sheet 00; buy 200mm ductile iron pipes steel in UAE; 40cr bright precision steel tubing; 3mm stainless steel sheet 304 316 904l; New premium astm a50pre steel pipe; 2J64 precision alloy in Israel; best sell a53 carbon steel pipe manufacturer;

lifting steel plate - alibaba

A wide variety of lifting steel plate options are available to you, such as astm, aisi, and jis. You can also choose from plate, coil. As well as from iso, sgs, and bv. And whether lifting steel plate is hot rolled, or cold rolled. There are 31,716 lifting steel plate suppliers, mainly located in Asia.

ASTM A36 Mild/Low Carbon Steel - AZoM

ASTM A36 is the most commonly used mild and hot-rolled steel. It has excellent welding properties and is suitable for grinding, punching, tapping, drilling and machining processes. Yield strength of ASTM A36 is less than that of cold roll C1018, thus enabling ASTM A36 to bend more readily than C1018 ...

Eddie Kane Steel - YOUR #1 SOURCE FOR STEEL PLATE

Eddie Kane Steel Products, Inc., is a steel service center and distributor of carbon and alloy steel plate. Our inventory includes hot-rolled prime and non-prime steel plate and plate products. We fabricate counterweights, original equipment manufacturer (OEM) parts, and other burn-outs.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.