Tel: +86-371-86151827

1 1221 carbon steel plate

Steel grade:1 1221 carbon steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

1 1221 carbon steel plate Introduction

1.1221 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 1.1221 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

DIN 1.1221 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. DIN 1.1221 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

1.1221 Steel - Special Steel

Step Shaft 1.1221 Tube 1.1221 Pie-shaped 1.1221 Ring 1.1221 Module Large valves of the main 1.1221 Other Profiled forgings 1.1221 . Special Steel classification:. Stainless steel, Hi-Steel HSLA-80, Mould steel, Heat resistant steel, Tool steel, Ball bearing steel,Spring steel, Alloy steel, Construction steel, Die steel, High-speed steel, angles, channels, H steel, I-beams, welded pipes ...

Mat.No. 1.1221, DIN Ck60, AISI 1060 - Alloy steel bars ...

Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI CK60 622 1.1221 Ck60 - 1060 Chemical Composition (in weight

CK60 Carbon Steel Round Bar | XC60 Round Bar | ssroundbar

CK60 Carbon Steel is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking.

CK60 carbon steel plates - hearts-of-steel/

C30 steel, steel plates,C30 steel sheet, is a kind of high carbon steel plates,steel sheets in EN10250 standard. Carbon Steel C40. It is a meduim Carbon Steel which is similar to low carbon steel except that the carbon ranges from 0.30 to 0.60% & the manganese from 0.50 to 1.65%.

1.1221 Steel - Special Steel

Step Shaft 1.1221 Tube 1.1221 Pie-shaped 1.1221 Ring 1.1221 Module Large valves of the main 1.1221 Other Profiled forgings 1.1221 . Special Steel classification:. Stainless steel, Hi-Steel HSLA-80, Mould steel, Heat resistant steel, Tool steel, Ball bearing steel,Spring steel, Alloy steel, Construction steel, Die steel, High-speed steel, angles, channels, H steel, I-beams, welded pipes ...

CK60 carbon steel plates - hearts-of-steel/

C30 steel, steel plates,C30 steel sheet, is a kind of high carbon steel plates,steel sheets in EN10250 standard. Carbon Steel C40. It is a meduim Carbon Steel which is similar to low carbon steel except that the carbon ranges from 0.30 to 0.60% & the manganese from 0.50 to 1.65%.

Mat.No. 1.1221, DIN Ck60, AISI 1060 - Co., Ltd.

Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI CK60 622 1.1221 Ck60 - 1060 Chemical Composition (in weight

Non-alloy carbon steel - virgamet

Non-alloy steels specification. Only part of the material available in this subgroup is available in our company. Non-alloy steels are used on low-responsibility parts of machines, appliances, everyday products such as household appliances, metal furniture parts, fasteners, construction in general construction, industrial, automotive industry, and also hydraulics.

EN 1.1221 (C60E) Non-Alloy Steel :: MakeItFrom

EN 1.1221 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. 1.1221 is the EN numeric designation for this material. C60E is the EN chemical designation. It can have a fairly high tensile strength and has a moderately low thermal conductivity among wrought carbon …

DIN C60E carbon steel plate - hopkinsplasticsurgery

Din C60e, Din C60e Suppliers and Manufacturers at …TIN 2391 st52 seamless tube/st52 pipe c60e tube seamless steel pipe for sale Product details Keyword CARBON SEAMLESS STEEL PIPE /TUBE API5L Product name Carbon Steel Seamless Pipe Outside Diameter 10.3-914.4mm Wall Thickness 1.24-63.5mm or SCH5S-XXS Material GR.[PDF]

EN 10083 C60 steel plate - steel-plate-sheet

C60 steel plate, EN 10083 C60 steel plate, under EN 10083 standard, we can regard C60 steel plate as high carbon steel . C60 steel plate is one mainly of high carbon steel, EN 10083 C60 steel plate is one of the higher carbon content (0.60%) steels.It is more difficult to fabricate than the lower carbon grades. C60 EN 10083-2 Number:1.0601 ...[PDF]

Steel Data CK60 - Pathfinder

Machinability of CK60 and all of the higher carbon steels is relatively poor. CK60 rates at 55 to 60 % that of the AISI 1112 steel which is considered 100% machinable. Other Information Corrosion Resistance: This steel is not corrosion resistant. it will rust unless protected. Welding: CK60 steel is weldable by all of the welding methods.

carbon steel c60 - gmatindia.in

Carbon Steel Plates - C45 Plate Manufacturer from Mumbai. A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material. Learn more.

1018 Carbon Steel Round Bar | 1.0402 Round Bar | ssroundbar

Being one of the noted manufacturer, stockists and suppliers, weoffer 1018 Carbon Steel Round Bar.Available at economical rates, the offered 1018 Carbon Steel Round Bar are widely used in metallurgical, mechanical, electrical construction field, ships, military uses and automobile rear of products.We are a prominent name in manufacturing and supplying a wide range of 1018 Carbon Steel …

Mat.No. 1.1221, DIN Ck60, AISI 1060 - Alloy steel bars ...

Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI CK60 622 1.1221 Ck60 - 1060 Chemical Composition (in weight

1.1221 Valve,1.1221 flanges,1.1221 Pipe Fitting,1.1221 ...

1.1221 angle bars, 1.1221 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control 1.1221 chemical composition and 1.1221 mechanical properties.

c60 carbon steel - pressure-vessel-steel

C60/1.1221/SAE1060/S58C Forged carbon round bar-Fuhong steel. C60/1.1221 Quality Carbon Steel. C60/1.1221 carbon steel is a medium carbon steel according to DIN standard.It is often used in quenched and tempered condition. C40 steel plate,C40 steel supplier,C40 Chemical ...

steel plate,steel coil,steel bar for sale

C60/1.1221/SAE1060/S58C Forged carbon round bar … C60/1.1221 Quality Carbon Steel. C60/1.1221 carbon steel is a medium carbon steel according to DIN standard.It is often used in quenched and tempered condition. C60/1.1221 steel is widely used for less exacting springs, shafts, bushings, crankshafts, etc. JIS S45Cr Round Bar Sold In Bulk ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.