Tel: +86-371-86151827

rust resistant steel plate

Steel grade:rust resistant steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

rust resistant steel plate Introduction

Corrosion Resistant Plates - Corten B Steel Plates ...

Corrosion Resistant Plate A 588 is widely used at construction sites to reinforce building structures. This steel plate exhibit superior corrosion resistance over regular carbon steel as a result of the development of a protective oxide film on the surface of the metal which slows down further corrosion.

Cor-Ten steel plate-weathering resistant steel plates

COR-TEN has served as weathering steel (atmospheric corrosion- resistant steel). Corten steel plate has successfully overcome rust, steel’s most weakest.Alloying elements in COR-TEN cause a protective surface layer of the fine-textured rust to form,Cr: 0.40-0.65

Corrosion Resistant Plates - Alloy Steel Plates

Weathering steel (CORROSSION RESISTANT PLATE), fine-recognised beneath the trademark corten a metal and once in a while written without the hyphen as "corten a steel", is a group of metal alloys which had been advanced to obviate the want for painting, and form a stable rust-like appearance if exposed to the weather for numerous years. united states steel company (uss) holds the registered ...

A588 plate, A709-50W, A242, high strength corrosion ...

High Strength Weathering Steel Plate. ASTM A588, A242 and A709-50W are considered the ASTM equivalents to Cor-Ten® in steel plates. Available in various stock sizes per chart below; Additional Services: Unique cut-to-length for all gauges and widths under 5/8”, coil slitting and CNC precision plasma burning with continuous beveling

Alloy 317LMN Austentitic Stainless Steel Plate - Sandmeyer ...

Alloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum stainless steel with corrosion resistance superior to 316L and 317L. The higher molybdenum content, combined with an addition of nitrogen, provides the alloy with its enhanced corrosion resistance, especially in acidic chloride containing service.

corrosion resistant steel plate - hopkinsplasticsurgery

Stainless Steel | Corrosion Resistant Steel | Suppliers | … Stainless steel plate is often referred to as “corrosion-resistant steel” – it does not stain, corrode or rust as easily as normal carbon steel. It would however be misleading to say it is corrosion-proof. It differs significantly from standard carbon steel due …

ASTM A588 & A606 Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsLeeco Steel distributes ASTM A588 and A606 steel plates that are corrosion-resistant, high-strength low-alloy steel plate. A588 and A606 steel plates are excellent for welding, riveting or bolting in construction applications. We offer various thicknesses, lengths, and widths to meet your specifications. Request a quote today!

Steel Plate Grades - Continental Steel & Tube Company

ASTM A36 PLATE STEEL is a structural quality product designed for use in welded, bolted, or riveted fabrications such as oil rigs, buildings and bridges.Produced with a min. yield of 36,000 psi, A36 plate can be used in the construction of a variety of lightweight structures and equipment where good welding properties are important.[PDF]

Corrosion-resistant steel plates - Nippon Steel & …

Corrosion-resistant Steel Plates Corrosion-resistant Steel Plates are used as special steel stock for corrosion protection. They are steel materials with corrosion resistance improved by adding anti-corrosion elements (Cr, Cu, Ni, etc.) in an amount that most suits the environment in which the steel …

Stainless steel - Wikipedia

In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable (inoxidizable), is a steel alloy, with highest percentage contents of iron, chromium, and nickel, with a minimum of 10.5% chromium content by mass and a maximum of 1.2% carbon by mass.. Stainless steels are most notable for their corrosion resistance, which increases with increasing chromium content.Corrosion resistance·

Corrosion Resistant Plates - Corten Steel Manufacturer ...

Approx. Rs 95 / Kilogram(s) Get Latest Price Corten Steel Plate offered feature sturdy construction standards and are corrosion resistant in terms of finish which make these provide optimum usage values.These steel plates are thermostatically balanced and constructed using metal alloys with latest technology support and in different grades and dimensions as required by the customers.

China Corrosion Resistance Round Steel Products - MS Plates

Anyway, if you want to find China Corrosion Resistance Round Steel Products, MS Plates plate/sheet bar supplier, China Corrosion Resistance Round Steel Products, MS Plates plate/sheet bar manufacturer, China Corrosion Resistance Round Steel Products, MS Plates plate/sheet bar exporter, please contact steel's sales team.

Corrosion Resistant Steel Plates - corten-steel

Weathering steel (Corrossion Resistant Plate), fine-recognised beneath the trademark corten a metal and once in a while written without the hyphen as "corten a steel", is a group of metal alloys which had been advanced to obviate the want for painting, and form a stable rust-like appearance if exposed to the weather for numerous years. united states steel company (uss) holds the registered ...

321 corrosion resistant stainless steel plate

321 Stainless Steel Plate, Sheet, Round Bar, Pipes, Tubes ...The titanium within means the stainless steel is intergranular corrosion resistant after heating, (between 425-900 degrees Celsius). Remarkably high strength as well as scaling resistance and phase stability set 321 Stainless Steel …

Corten Plates| Corrosion Resistant Steel Plates| Corten A ...

Corten Steel Plates| Atmospheric Corrosion Resistant Steel Plates | Weather Resistance Steel Plates Corten Steel Plates – CORTEN A HSLA, CORTEN® A, CORTEN® B, ASTM 588 GR.A, JIS 3125 SPA-H, IRSM-41-97, SAILCOR, S355 J0WP, S355 J0W, S355 J2W Importer, Stockholder, Suppliers and Exporter traders of Corten Steel Plates in India

Corrosion Resistant Steel Plates Supplier, Atmospheric ...

Corten Steel Grade A588 is widely used at construction sites to reinforce building structures. This steel plate exhibit superior corrosion resistance over regular carbon steel as a result of the development of a protective oxide film on the metals surface which slows down further corrosion.

Corrosion Resistant Plates - Corten Steel Plates ...

Corten B Steel Plates are corrosion resistant and need no maintenance. The plates are developed using weathering steel and a protecting layer is their on the steel surface when used in hazardous weather conditions. These steel plates are used in welded bridges, high buildings and shipping container, and other outside steel structures. ...

Corrosion Resistance of Zinc Plating - Sharretts Plating ...

If you’re contemplating the best way to protect metal surfaces against the relentless forces of corrosion, a simple phrase to keep in mind is “think zinc.” When a zinc coating is electroplated onto the surface of ferrous (iron-containing) metals, it creates a formidable corrosion-resistant barrier — while also providing a number of other important benefits.

corrosion resistance wethering steel advantages and ...

corrosion resistance wethering steel advantages and disadvantages in pdf, steel,Hot sell corrosion resistance wethering steel advantages and disadvantages in pdf, MS Plates stock in China,China corrosion resistance wethering steel advantages and disadvantages in pdf, MS Plates factory.

Stainless Steel Sheet & Plate | Stainless Steel | Sheet ...

304 & 316 Stainless steel sheet & plate is the ideal choice due to its tensile strength, high resistance to rust, and high fabrication ability. Cost-effective and versatile material, sheet is suitable for most applications where durable support and corrosion resistance are …

Steel Plate Grades - Continental Steel & Tube Company

ASTM A36 PLATE STEEL is a structural quality product designed for use in welded, bolted, or riveted fabrications such as oil rigs, buildings and bridges.Produced with a min. yield of 36,000 psi, A36 plate can be used in the construction of a variety of lightweight structures and equipment where good welding properties are important.[PDF]

Corrosion-resistant steel plates - Nippon Steel & …

Corrosion-resistant Steel Plates Corrosion-resistant Steel Plates are used as special steel stock for corrosion protection. They are steel materials with corrosion resistance improved by adding anti-corrosion elements (Cr, Cu, Ni, etc.) in an amount that most suits the environment in which the steel …

Abrasion Resisting Plate - Tell Steel Inc.

AR-500 Plate (500 Nominal Brinell Hardness) is a quench and tempered high strength alloy steel which has superior abrasion resistance and toughness.AR-500 alloy steel will reduce material handling costs to a minimum for earth moving, mining and other similar industries in which a combination of toughness and abrasion resistance is required.

Why Does Steel Rust? Plus Other Steel Rusting Questions ...

Mild steel has a low carbon content, and the carbon does not help prevent the steel from rusting. Elements that are introduced to steel like molybdenum, titanium and chromium can improve the corrosion resistance of steel, but it does not make the steel rust proof. Does Galvanized Steel Rust? What About Titanium Steel and Stainless Steel?

How to Prevent Rust | Metal Supermarkets

Using Rust Resistant Alloys. The most popular rust resistant alloys are stainless steel and weathering steel. Stainless steel contains a minimum of 11% chromium. This allows the formation of a protective film of chromium oxide which acts as a shield against rust. The protective film will re-form if damaged. Corrosion resistance can be further ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.