Tel: +86-371-86151827

steel plate cutter steels

Steel grade:steel plate cutter steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel plate cutter steels Introduction

What Is The Best Way To Cut Steel Plate - ESAB

An oxy-fuel torch can cut through very thick plate, limited primarily by the amount of oxygen that can be delivered. It is not unheard of to cut through 36, or even 48 inches of steel using an oxy-fuel torch. However, when it comes to shape cutting from steel plate, the vast majority of work is done on 12 inch thick plate and thinner.ESAB Welding & Cutting · Contact ESAB

What is the best way to cut steel? - sellsteels

Steel plate cutting using gas flame preheat the metal will be cut to be able to burn ignition, and then release the high pressure oxygen flow, make further dramatic metal oxidation and formation of combustion slag blowing off cutting process.

Carbide Cutters - Steel Plate - milwaukeetool

Specifically designed for hand held operations in materials up to 3/8" thick, these carbide tipped Steel Plate Cutters stay sharper longer than High Speed Steel or Bi-Metal Hole Saws. They produce Drill Press quality holes even in hand held operations. For cutting materials over 3/8" up to a depth of 1/2", a drill press is recommended.

Steel Sheet & Plate - Industrial Metal Supply

Industrial Metal Supply is your #1 source for steel sheet and plate. We can provide cold rolled steel sheet and cold rolled steel plate in the size and gauge you need, including custom cut-to-size pieces. Contact us for steel sheet, plate, and much more.

How to Cut a Steel Plate at Home | Home Guides | SF Gate

There are numerous methods of cutting a steel plate at home. Unfortunately, most of the methods require expensive tools and years of training to perform the cut safely. One cutting method uses an ...

Cutting thick steel plate - Industrial Laser Solutions

The laser used for cutting steel plates (up to 25 mm thick) is predominantly CO 2, however, more recently the Nd:YAG laser is becoming an industrial performer in this area. Following a report at ICALEO 2003, it is now possible to obtain high-quality cutting of mild steel plate to 50 mm thickness using a fiber-delivered Nd:YAG laser at incident ...

Discount Steel – Steel: A36, Flat Bar, Plate, Tread Plate ...

Discount Steel – Large or Small Quantity Steel – Order Online – No Minimum Order – Cut to size steel plate, sheet, bar, tube, and pipe – Large inventory of steel materials, including: A36, A569, 1018 – Large selection of steel structural materials

Amazon: sheet steel cutter

amazon› Search› sheet steel cutterAmazon: sheet steel cutter. From The Community. ... LDEXIN 6mm/0.24" Triangle Shank 75mm/2.95" Cutting Dia Tungsten Carbide Tip Teeth Hole Saw Heavy Duty Thick Metal Sheet Wood Steel Cutter Drill Bits(75mm Dia) by LDEXIN. $17.99 $ 17 99 Prime. FREE Shipping on eligible orders.

metal plate cutter | eBay

ebay› Search› metal plate cutter16mm Steel Tipped Twist Drill Bit Metal Hole Saw Plate Cutter - Colormix See more like this Mini 1.5mm THROATLESS ROTARY SHEAR PLATE CUTTER Sheet Metal Cutter Cutting Roll Brand New

What to use for cutting 1/4" steel plate - weldingweb

weldingweb› …› Machines, Tools & Cutting MethodsOct 31, 2010· I have two 7-1/4" circular saws made for cutting metal with a carbide tip blade. They're both Evolution's, a Rage 1 and a Steel 1. I have a few Freud Diablo and Steel Demon blades, an Evolution steel blade and a Steel Max blade for these saws that all work very well.Cutting 3/16" thick mild steel plate with Hypertherm ...Jun 09, 2017Cutting holes in steel with hole sawsFeb 03, 2014Cutting 1/4" steel on a budgetJul 30, 2013Hole saws drilling through 1/4 steelApr 16, 2012See more results

How to Cut a Steel Plate at Home | Home Guides | SF Gate

There are numerous methods of cutting a steel plate at home. Unfortunately, most of the methods require expensive tools and years of training to perform the cut safely. One cutting method uses an ...

What to use for cutting 1/4" steel plate - weldingweb

weldingweb› …› Machines, Tools & Cutting MethodsOct 31, 2010· I have two 7-1/4" circular saws made for cutting metal with a carbide tip blade. They're both Evolution's, a Rage 1 and a Steel 1. I have a few Freud Diablo and Steel Demon blades, an Evolution steel blade and a Steel Max blade for these saws that all work very well.

Cutting thick steel plate - Industrial Laser Solutions

The laser used for cutting steel plates (up to 25 mm thick) is predominantly CO 2, however, more recently the Nd:YAG laser is becoming an industrial performer in this area. Following a report at ICALEO 2003, it is now possible to obtain high-quality cutting of mild steel plate to 50 mm thickness using a fiber-delivered Nd:YAG laser at incident ...

3 Ways to Cut Steel - wikiHow

Aug 29, 2018· How to Cut Steel. Steel comes in many different forms and thicknesses. Steel thickness is referred to as "gauge." The smaller the number of gauge, the thicker the steel. Thin-gauge steel, like sheet metal, can be cut with a large variety...Views: 199K

Steel Cutter, Steel Cutter Suppliers and Manufacturers at ...

There are 506,350 steel cutter suppliers, mainly located in Asia. The top supplying countries are China (Mainland), Pakistan, and Taiwan, which supply 97%, 1%, and 1% of steel cutter respectively. Steel cutter products are most popular in North America, Southeast Asia, and Domestic Market.

Steel Plate Cutting - American Alloy Steel

aasteel› ServicesSteel Plate Cutting. Home > Services > Steel Plate Cutting; We offer computer automated cutting of steel plate up to 12” thick. We maintain a large library of standard shapes / patterns with the capability to electronically download customer's CAD files for use in cutting custom steel shapes / patterns.

Bar-Plate - The Diecutter's Source - Steel Diecutting Jackets

Machining Custom machining of your Cutting Plates Bar-Plate has the capabilities to custom machine any metal cutting surface. We can LASER, WATERJET, CAD/CAM, or simply DRILL and TAP any Plate to your specifications. Centerline systems, Quick Lock-up, and many others are quickly duplicated.

CNC Laser Cutting - Discount Steel

Discount Steel offers CNC Laser Cutting at Discount Prices. Our Precision CNC Lasers can custom cut parts out of Steel, Stainless Steel, and Aluminum. With Fast Friendly and Quality service for less what more could you ask for? Now offering Laser Cutting in Minneapolis, MN and Fort Worth, TX.

What is the best way to cut 1/2 inch steel? - Quora

Plasma arc cutting is a great process for cutting mild steel plate, offering much higher speeds than oxy-fuel cutting, but sacrificing some edge quality. That is where plasma is tricky. Edge quality has a sweet spot that, depending on cutting current, generally ranges from about 1/4 inch up to 1.5 inches. ... What is the best way to cut metal ...

304 Stainless Steel Plate | Midwest Steel & Aluminum

304 Stainless Steel Plate. 304 Stainless Plate, the most widely used of the stainless and heat resisting steels. 304 stainless plate offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments Typical specifications for 304 Plate and 304L Stainless Steel Plate are ASTM A-240, ASME SA -240 and A666.

Klutch Plate Shear — 12in. | Northern Tool + Equipment

The Klutch® Plate Shear with 12in. blade length is ideal for shearing carbon steel plate and bars, cutting non-ferrous metal or shearing plastic plate and bar.Price: $158.99

How to Cut Stainless Steel Plate | DoItYourself

doityourself› …› Workshop Tools & AccessoriesAs long as you use the right type of blade, this saw can cut through a thinner stainless steel plate. Install a metal cutting blade that is made specifically for stronger pieces of steel, place the plate on a piece of plywood for a strong backing, and mark where the cut is to be made. Slowly cut into the metal and keep the blade moving as you go.

Plasma Cutting - Stainless Steel Plate and Sheet | Penn ...

Plasma Cutting. Penn Stainless Products utilizes two Koike Aronson Versagraph Millennium Series Plasma Cutting Systems (Model 3100), which provide powerful precision cutting for superior part quality and consistency up to 6.25-inch-thick stainless steel plate.

Plasma Plate Cutting Machine | Plate Pro Metal ... - Koike

Plate Pro Metal Plate Cutting Machine *Shown in picture: Cutting table optional . The Plate Pro® is a metal plate cutting machine that is affordable, easy to install and simple to operate that utilizes plasma and oxy-fuel cutting technology to cut through metal.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.