Tel: +86-371-86151827

hot rolled en10088 2 1 4404 stainless steel plate

Steel grade:hot rolled en10088 2 1 4404 stainless steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot rolled en10088 2 1 4404 stainless steel plate Introduction

EN 10088-2 Chemical Composition Stainless Steel

EN 10088-2 Chemical Composition Stainless Steel. EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. A total of 83 stainless steel grades are listed, including 19 ferritic, 14 martensitic, 2 precipitation hardening, 40 austenitic and 8 austenitic-ferritic duplex grades. The chemical composition of these stainless steel are shown in this article.[PDF]

Stainless steel flat products for building – the grades in ...

2 STAINLESS STEEL FLAT PRODUCTS FOR BUILDING – THE GRADES IN EN 1 0 0 8 8 - 4 EXPLAINED Table of contents of EN 10088-4 Note: In this publication, the paragraphs marked in dark blueare specifically expanded on.

EN10088-1 stainless steel ,EN10088-1 Austenite stainless ...

The main steel grades of EN10088-1 Austenite stainless steel are X2CrNi19-11, 1.4306, X5CrNi18-10, 1.4301, X2CrNiMo17-12-2, 1.4404, X5CrNiMo17-11-2, 1.4401, X12CrMnNiN17-7-5, 1.4372, X12CrMnNiN18-9-5, 1.4373. All of these material can be produced as stainless steel coil/strip , stainless steel plate/sheet, stainless steel pipe/tube , stainless ...

en 10088-1 stainless steel - Mild Cold Rolled steel plate

en 10088-1 stainless steel, steel,Hot sell en 10088-1 stainless steel, Mild Cold Rolled steel plate stock in China,China en 10088-1 stainless steel, Mild Cold Rolled steel plate factory. Keeps more than 10,000 tons hot rolled and cold rolled en 10088-1 stainless steel, Mild Cold Rolled steel plate in …

en 10088 x2crnimo17 12 2 - MS Plates - napmr.org

EN 10088-1 X2CrNi-Mo17-12-2 stainless steel,EN 10088-1 . ... F 316L Grade Stainless Steel (1.4404 to EN 10088) Material: Austenitic stainless steel. 17% Cr. / 11% Ni. / 2% Mo. x2crnimo17 12 2 material - vamosargentina.net ... See the chemical composition and physical properties of EN 10088-2 Grade X5CrNiMo17-12-2 plate, hot rolled, find ...

Stainless Steel - Austenitic - 1.4404 Sheet and Plate ...

1.4404 Sheet and Plate (Quarto Plate & CPP) Quarto Plate is hot rolled plate over 12mm thick that has not been coiled during production. CPP is Continuously Produced Plate up to 12mm thick that has been coiled during rolling. Sheet is Cold Rolled. Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively.

Stainless Steel - Grade EN 10088-2

Stainless Steel EN 10088-2 The Rolf Engg. Solutions Inc. is the spectrum of trading, stockholding and manufacturing activities in Stainless Steel Carbon Steel, nickel Alloy, Alloy Steel, Titanium, Monel, Inconel, Hastalloy in the form of sheet, plate, fittings and coils.

Forta 316L/4404 - Outokumpu stainless steel finder

Forta 316L/4404 EN 1.4404, ASTM TYPE 316L / UNS S31603 stainless steel grade details

stainless en 10088 2 en 1 4003 - Mild Cold Rolled steel plate

stainless en 10088 2 en 1 4003, steel,Hot sell stainless en 10088 2 en 1 4003, Mild Cold Rolled steel plate stock in China,China stainless en 10088 2 en 1 4003, Mild Cold Rolled steel plate factory. Keeps more than 10,000 tons hot rolled and cold rolled stainless en 10088 2 en 1 4003, Mild Cold Rolled steel plate in stock each month.

EN 10088-2 Grade X2CrNiMoN18-12-4 plate, hot rolled ...

See the chemical composition and physical properties of EN 10088-2 Grade X2CrNiMoN18-12-4 plate, hot rolled, find alternative materials, and connect with suppliers.

stainless steel X5CrNiMo17-12-2? - MS Plates - napmr.org

stainless steel X5CrNiMo17-12-2?, steel,Hot sell stainless steel X5CrNiMo17-12-2?, MS Plates stock in China,China stainless steel X5CrNiMo17-12-2?, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled stainless steel X5CrNiMo17-12-2?, MS Plates in stock each month. We can meet our customer's any quantity request.

BS EN 10088-2:2014 Stainless steels. Technical delivery ...

Metallurgy > Iron and steel products > Stainless steels ... BS EN 10088-2:2014 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes ... It specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of ...

BBN Steel Supply hot rolled en10088 2 1 4016 stainless ...

We will give you the hot rolled EN10088 2 1 4401 stainless steel plate, pressure vessel steel plate grades plate competitive price, hot rolled EN10088 2 1 4401 stainless steel plate, pressure vessel steel plate grades plate good quality and best service from us.

X5CrNi1810 Sheets, Stainless Steel X5CrNi1810 Plates ...

Jayesh Metal Corporation is One of the Reputed Supplier and Exporter of X5CrNi1810 plates, UNS S30400 Sheets, X5CrNi1810 SS Plate, DIN 1.4301 Steel Cold Rolled Sheets, Stainless Steel 1.4301 Plates, AISI 304 Sheet, SS X5CrNi1810 HR Plates, SS X5CrNi1810 CR Sheets, EN X5CrNi1810 Plate, EN 10088-2-2005 X5CrNi1810 sheets and plates in Mumbai, India.

Datasheets - Stainless Steel - Austenitic - 1.4404 Sheet ...

Quarto Plate is hot rolled plate over 12mm thick that has not been coiled during production. CPP is Continuously Produced Plate up to 12mm thick that has been coiled during rolling. Sheet is Cold Rolled. Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively.[PDF]

Stainless Steel – EN Standards for Cold Rolled - Stealth …

Stainless Steel – EN Standards for Cold Rolled abc ... *Note: Special finishes indicate hot rolled (1) and cold rolled (2) sheets, e.g.: Ground polished hot rolled sheets = 1G / Ground polished cold rolled sheets = 2G ... Stainless Steel – EN Standards for Cold Rolled abc ...

Supra 316L/4404 - Outokumpu stainless steel finder

Supra 316L/4404 is our most widely used molybdenum-alloyed austenitic stainless steel. Supra 316L/4404 is a low-carbon stainless steel and is used in various process industries and other aggressive environments with higher than average corrosion resistance requirements.

Chemical composition of stainless steel flat products for ...

Nov 13, 2014· Chemical composition of stainless steel flat products for general purposes to BS EN 10088-2 Introduction. BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. A total of 97 stainless steel grades are listed, including 25 ferritic, 14 martensitic, 2 precipitation hardening, 44 austenitic and 12 ...

1 4404 Stainless Steel Plate 316L - broadsearch.in

The steel grade 1.4404 (also called ASTM 316/ 316L and ≈ SS2348) is a stainless ” acid-proof” steel which is easy to machine. The steel has improved machinability by, MAXIVAL®, and it is suitable for production of corrosion resistant products by machining.

1.4404 standard cold rolled stainless steel sheet

Stainless Steel - Austenitic - 1.4404 Sheet and Plate - Aalco. Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and Property data given in this document is typical for flat rolled products covered 316Ti retains physical and mechanical properties similar to standard grades of 316. Cold working will increase both strength and ...[PDF]

Stainless Steel: Tables of Technical Properties

Stainless Steel: Tables of Technical Properties Materials and Applications Series, Volume 5. ... • Chemical and physical properties are in accordance with EN 10088-1:2005 • Mechanical properties are in accordanc e with EN 10088-2:2005, except for he ... X2CrNiMo17-12-2 1.4404

Sheet / Aisi 316l Stainless Steel Plate - alibaba

Sheet / Aisi 316l Stainless Steel Plate , Find Complete Details about Sheet / Aisi 316l Stainless Steel Plate,Aisi 316l Stainless Steel Sheet,Aisi 316l Stainless Steel Sheet /,Aisi 316l Stainless Steel Sheet / Aisi from Stainless Steel Sheets Supplier or Manufacturer-Tianjin Yinyin International Trade Co., Ltd.

Products - OTK Stainless steel

Thickness for hot rolled plates are starting from 5.0 mm up to 65.0 mm in all standart sizes such as 1000 x 2000mm; 1250 x 2500mm; 1500 x 3000mm, if necessarry we can provide materials in special size. Stainless steel plates are available in surface finishes such as No.1 or 1D - Metallic pure, hot rolled, annealed, pickled.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.