Tel: +86-371-86151827

1345 carbon steel plate steels

Steel grade:1345 carbon steel plate steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

1345 carbon steel plate steels Introduction

ASTM 1345 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. ASTM 1345 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Carbon Steels and Manganese Steels for ... - jfs-steel

Along with steel bars, steel plates and steel tubes supply, steel cutting, drilling, machining and heat treatment services are also provided. JFS Steel has been offering customers special steel materials such as AISI-1345 Carbon Steels and Manganese Steels for Machine Structural use and precision steel machining services since 2006.

1345 Alloy Steel Plate - hopkinsplasticsurgery

1345 Alloy Steel Plate: Section F · PDF Sec . F Page 3 HiGH StRenGtH LoW ALLoY SteeL (Continued) HiGH HiGH StRenGtH StRenGtH SHeetS PLAteS Width est . Wt . ... Punch Press Department & Slide Department Low Carbon Steel ... Learn more. 美国合金标准(ANSI alloy standards) - 有限会社MSC.

Structural Steels with Specified Hardenability Bands AISI ...

Along with steel bars, steel plates and steel tubes supply, steel cutting, drilling, machining and heat treatment services are also provided. JFS Steel has been offering customers special steel materials such as AISI-1345 Structural Steels with Specified Hardenability Bands and precision steel machining services since 2006.

AISI 1345 alloy steel plate - srilankasports.org

AISI 1345 alloy steel plate. ... Mn, Ni, Mo, Cr, Va, Si, and B which have been set for carbon steels. 1345 steel Steel type . 1345 steel Steel type steel plate is structural steels, used for welding, bolting, and more riveted structure. steel plate,steel pipe,steel coil .

AISI 1345 steel - Steel Exporter BeBon China

AISI 1345 steel. AISI 1345 steel is a kind of alloy steel. Alloy steels comprise a wide variety of steels which have compositions that exceed the limitations of C, Mn, Ni, Mo, Cr, Va, Si, and B which have been set for carbon steels. However, steels containing more than 3.99% chromium are classified differently as stainless and tool steels.

SAE 1345H steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SAE 1345H can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.[PDF]

E-218 AISI-SAE Classification of Steels - BLUESHIELD

AISI American Iron and Steel Institute SAE Society of Automotive Engineers ... AISI-SAE Classification of Steels Classifications Specifications Carbon steels Carbon steels, resulfurized Carbon steels, resulfurized and rephosphorized Manganese steels Nickel steels ... 1345 4012 4023 4024 4027 4028 4032 4037 4042 4047 4118 4130 4135 4137 4140 ...[PDF]

Plate Specification Guide 2015-2016 - …

Carbon and Alloy Plate Steels conforming to ASTM A6 or A20 ... 2015-2016 Plate Steel Specification Guide – Page 6 ASTM Specifications continued SPECIFICATION A299 Grade A A299 Grade B A302 Grade A A302 Grade B A302 Grade C A302 Grade D Type of Steel Carbon Carbon Alloy Alloy Alloy Alloy Requirements for Delivery A20 A20 A20 A20 A20 A20 ...

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.[PDF]

CHATHAMSTEELCORPORATION 25 HOT ROLLED BLACK …

CHATHAMSTEELCORPORATION 25 HOT ROLLED BLACK SHEETS COMMERCIALQUALITYA-569 Size(In.) Nom.Thickness WeightPerSheet ... HOT ROLLED CARBON STEEL PLATES REGULARQUALITY.33MAX.CARBON ASTMA283GRADED ASTMA36 ... steels.Also,unliketraditionalARsteels,the400formablesteelhas athrough-thicknesshardness.

gr60 steel density - MS Plates - napmr.org

Astm A515 Gr.60 Steel Plate, Astm A515 Gr.60 Steel Plate A515 Gr 70 ASTM A516 Gr60 Carbon Steel Plate Price Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service to ASTM A 516/ A 516M Standard ASTM A 516 or ASME SA 516 grade is one of the most popular steel . High strength low alloy (HSLA) steels for cold forming

Carbon Steel 1345 Wholesale, Carbon Steel Suppliers - Alibaba

Alibaba offers 124 carbon steel 1345 products. About 4% of these are steel pipes, 1% are steel sheets. A wide variety of carbon steel 1345 options are available to you, such as 10#, q235, and 20#.[PDF]

E-218 AISI-SAE Classification of Steels - BLUESHIELD

AISI American Iron and Steel Institute SAE Society of Automotive Engineers ... AISI-SAE Classification of Steels Classifications Specifications Carbon steels Carbon steels, resulfurized Carbon steels, resulfurized and rephosphorized Manganese steels Nickel steels ... 1345 4012 4023 4024 4027 4028 4032 4037 4042 4047 4118 4130 4135 4137 4140 ...

AISI 1345 Alloy Steel - Special Steel

Alloy and Carbon Steel. Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels.

SAE 1345H steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SAE 1345H can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

1345 alloy structural steel plate - hopkinsplasticsurgery

1345 Alloy Plate, 1345 Alloy Plate Suppliers and ...Alibaba offers 34 1345 alloy plate products. About 79% of these are steel sheets, 5% are aluminum sheets. A wide variety of 1345 alloy plate options are available to you, such as is alloy, non-alloy. You can also choose from free samples. There are 34 1345 alloy plate suppliers, mainly located in Asia.

NM450/NM500/NM550 Steel Plate-GNEE GROUP Discount Steel …

Product Introduction. NM 400/ NM45 0 Wear-Resistant Steel Plate (Abrasion Resistant) Hardox s teel p late is used in the manufacture of n umerous products; Conveyors, Chutes & Liners and Aggregate Containers are a few examples of uses for the hot rolled coil-NM450 steel sheet.Typically, hot rolled steel plart-NM400 steel plate is made in the as-rolled condition.[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

Carbon Steel Plate|Alloy Steel Plate ... - steels-supplier

Agico sells the most common steel plate: steel plate for boiler, linepipe steel plate, checkered steel plate made of carbon steel, alloy steel and stainless steels.

Debo Steels co., LTD

steel pipe,steel tube,fittings,seamless steel pipe,stainless steel pipe,carbon steel pipe,steel plate,steel sheet,carbon steel plate,carbon steel sheet,stainless steel sheet,flange,welded pipe,steel tubing[PDF]

Section F - emjmetals

AR 360 ABRASion ReSiStinG SteeL PLAteS color Marking: Brown Abrasion Resisting Steel is a medium-carbon, low-alloy steel that has been heat treated by quenching and tempering to develop high abrasion and impact resistance and high yield strength. Resistance to wear and abrasion is to a large degree a function of carbon content and hardness.

Mirraloy® FM TGP | 1144 Steel | Associated Steel Corporation

Mirraloy FM is a high strength micro-alloyed, free machining carbon steel. Typical tensile strength 133,000 PSI. This steel shaft offers both a high degree of machinability, like a carbon steel, but has the strength consistent with an alloy steel. It does not exhibit hard and/or soft spots similar to what is seen in most carbon steels.

Manufacturer of Carbon steel ASTM A568 sheets & Plates ...

Red Earth Steel manufacture and export Carbon Steel Sheets & Plates in these availble gradesASTM A568/A36/ ASTM A285 Gr. B with high quality. We also manufacture and export Carbon Steel Sheets Plates in other materials also like Nickel Alloys, Stainless Steel , Mild Steel, Alloy Steel etc.

Q345R Pressure Vessel Steel Plate - steels-supplier

Q345R Steel Introduction:. Q345R is a combination of 16Mng, 19 Mng and GB6654-1996, and GB150 specified the thickness range is 3 ~ 200mm. The limit value of the tensile strength with low carbon content and standard is no more than 540Mpa, and it has good weldability, in common conditions cold and hot crack are not easy to form.

Classification of Carbon and Low-Alloy Steels

Generally speaking, carbon steels contain up to 2% total alloying elements and can be subdivided into low-carbon steels, medium-carbon steels, high-carbon steels, and ultrahigh-carbon steels; each of these designations is discussed below. As a group, carbon steels are by far the most frequently used steels.[PDF]

Plate - ArcelorMittal

to obtain maximum advantage with A514 and “T-1” Steels, it is nec-essary that the higher yield strength be accompanied by refinements in application design, workmanship and inspection. Available Grades ArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.