Tel: +86-371-86151827

1 4462 duplex stainless steel plate bar plate

Steel grade:1 4462 duplex stainless steel plate bar plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

1 4462 duplex stainless steel plate bar plate Introduction

Alloy 2205 Duplex Stainless Steel Plate - Sandmeyer Steel

Alloy 2205 duplex stainless steel plate is readily sheared and cold formed on equipment suited to working stainless steels. However, because of the high strength and rapid work hardening of 2205 duplex stainless steel plate, forces substantially higher than those for austenitic steels are required to …

1.4462 Duplex Steel Suppliers/1.4462 Duplex Plate/Sheet ...

1.4462 Duplex Suppliers - Techinical Metal Professional manufacturer of ASTM A240 Plate, SA 815 Plate, 1.4462 Duplex Plate India Check Price of 1.4462 Duplex Sheet/1.4462 Duplex Round Bar/1.4462 Duplex Fasteners Bolts Nuts Screws Washers Suppliers India.

Stainless Steel - Duplex - 1.4462 Sheet and Plate

1.4462 Sheet and Plate. Duplex stainless steels are extremely corrosion resistant, work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels.

1.4462 round bar 1.4462 Pipe 1.4462 Plate 1.4462 flanges ...

1.4462 stainless steel material grades Suppliers - what is 1.4462 stainless steel - 1.4462 equivalent (ansi / aisi / astm & din ) - austenitic alloy 1.4462 round bar pipe bolts - cast 1.4462 duplex ss chemical composition & corrosion resistance datasheet - 1.4462 en 10028-7 & en 10088, en grade 1.4462 specification - yield strength, steel number 1.4462 heat treatment - hardness & properties.

2205 Duplex Steel and 2507 Super Duplex Steel Sheet Plate ...

1.4462 Sheet and Plate. Duplex stainless steels are extremely corrosion resistant, work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels.

Steelinox : Duplex UNS S31803 / F51 / 1.4462 / 2205 ...

C max 0,03 Cr 21,00 - 23,00 Mo 2,50 - 3,50 Ni 4,50 - 0,60 N 0,10 - 0,22 . Duplex 1.4462 belongs to the family of duplex stainless steels. This steel is characterised by its excellent combination of corrosion resistance, comparable to that of the austenitic grade 1.4404, and strength, about 150% higher than that of the 1.4404 austenitic grades.

Duplex & Super Duplex Plates - Duplex Steel Plate S31803 ...

Duplex & Super Duplex Plates. Duplex Stainless Steel . Duplex stainless steel plate in specification S31803 (1.4462) and S32205. Duplex stainless steel was developed as a product which could improve upon some of the technical weaknesses of the standard austenitic and ferritic stainless steels that are available in the market.

Stainless Steel - Duplex - 1.4462 Sheet and Plate

1.4462 Sheet and Plate. Duplex stainless steels are extremely corrosion resistant, work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels.

2205 Duplex Steel and 2507 Super Duplex Steel Sheet Plate ...

1.4462 Sheet and Plate. Duplex stainless steels are extremely corrosion resistant, work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels.

2205 Duplex Stainless Steel Plate - UNS S32205

2205 is a duplex stainless steel, with a chemical composition of nearly equal proportions of austenite and ferrite. This combination allows the alloy to be stronger and tougher than standard austenitic steels. Duplex stainless steels like 2205 also maintain good weldability in their thickest sections, and they are much more resistant to stress corrosion cracking than standard austenitic steels.

Duplex & Super Duplex Plates - Duplex Steel Plate S31803 ...

Duplex & Super Duplex Plates. Duplex Stainless Steel . Duplex stainless steel plate in specification S31803 (1.4462) and S32205. Duplex stainless steel was developed as a product which could improve upon some of the technical weaknesses of the standard austenitic and ferritic stainless steels that are available in the market.

Duplex Steel Plate 1.4462 - Buy Duplex Stainless Steel ...

Duplex Steel Plate 1.4462 , Find Complete Details about Duplex Steel Plate 1.4462,Duplex Stainless Steel Plate 1.4462,Sa240 Material Duplex,Steel Plate 1.4462 Ss2377 Duplex from Stainless Steel Sheets Supplier or Manufacturer-Wuxi TP Inox Co., Ltd.

Duplex stainless steel plate grade S31803 / S32205

Stainless Steel Flat Bar (42) Stainless Steel Round Bar (178) Stainless Steel Angle Bar (37) ... 200 ton Stainless steel sheet is arrived on 10th Oct 2014 , the quality is very good.,deliver time is very fast It's very lucky we find this factory ... s31803/s32205 duplex steel plate grade:1.4462,s31803,s32205 thickness:2-150mm width:1000-2000mm

Duplex Stainless Steel - westyorkssteel

Duplex stainless steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of Duplex stainless steel in round bar, sheet and plate. Stocks are held in grade UNS S31803 1.4462 F51. Duplex stainless steel offers improved resistance to stress corrosion cracking, pitting and crevice corrosion.

Duplex 2205 Stainless Steel - Penn Stainless Products

Duplex 2205 Stainless Steel. Penn Stainless inventory now includes Duplex 2205 (UNS S32205 / S31803), in sheet, sheet coil, plate, plate coil, round bar, processed flat bar and tubular products. Duplex 2205 is ideally suited for high-pressure and highly corrosive environments.

S31803 (1.4462) Duplex Steel | S32205 Duplex Steel

Stainless Steel Plate. Brown McFarlane stocks a wide range of large area duplex stainless steel plates which are certified to material grades UNS S31803, UNS S32205, and 1.4462. These steels are also compatible with the branded 2205 designation

duplex steel astm grades products,duplex stainless steel ...

duplex stainless steel equivalent, super duplex stainless steel equivalent, 1.4462 duplex stainless steel equivalent, duplex 2205 stainless steel equivalent, duplex ...

Datasheets - Stainless Steel - Duplex - 1.4462 Sheet and ...

Whilst duplex stainless steels are considered resistant to stress corrosion cracking, they are not as resistant to this form of attack as ferritic stainless steels. However, the corrosion resistance of the least resistant duplex stainless steels is greater than that for the most commonly used grades of stainless steels, i.e. 304 and 316. Duplex ...

2205 Stainless Steel Sheet/bar/pipe - China 2205 Stainless ...

Features: 2205 is a duplex stainless steel with nearly equal proportions of austenite and ferrite when properly heat treated.This microstructure makes it much more resistant to stress corrosion cracking than stainless steel 304 and 316L. 2205’s higher chromium, molybdenum and nitrogen contents give it significantly improved pitting and crevice corrosion resistance in the presence of chlorides.

DUPLEX UNS S31803 - 1.4462 - X2CrNiMoCuWn22.5.3. - …

Europe Stockholder. Ex-stock round bars and plate in duplex, F51, F60, 1.4462, UNS S31803, UNS S32205, stainless steel,

Duplex Stainless Steel - Duplex Stainless Steel Plate ...

A wide range of large area Duplex Stainless Steel Sheet 31083 which are certified to material grades UNS S31803, UNS S32205, and 1.4462. These steels are also compatible with the branded 2205 designation.All material is produced and certified in accordance with NORSOK MDS D45 with plates up to and including 35 mm thick certified to Revision 4.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.