Tel: +86-371-86151827

q355 clad tube sheet steels

Steel grade:q355 clad tube sheet steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

q355 clad tube sheet steels Introduction

q355 5 sch 40 pipe round carbon steel tubes

Steel Pile Pipe Tube, Steel Pile Pipe Tube Suppliers and ...ASTM A252 hot rolled round steel tube/steel pipe pile. ... Any request for q355 5 sch 40 pipe round carbon steel tubes Email:[email protected] and Whaisapp:0086-130-83697781. ... Buy 316 Hairline Stainless Steel Sheets; 1mm thick Stainless Steel Sheet Prices per kg;

Aluminum Sheet - Series 2024-T3 Alclad

Browse Aluminum Sheet - Series 2024-T3 Alclad in the Continental Steel & Tube Co. catalog including Item #,Thickness,Size,Sheet Weight per Unit Area,Weight per Sheet[PDF]

Stainless Steel Cladding and Weld Overlays

Stainless Steel Cladding and Weld Overlays / 109 CLAPDING METAL ~.~ I (a) (b) Sintering Fig.3 Bond zone pattern typical of explosion-clad metals. Materials are type 304L stainless steel and medium-carbonsteel. 20x (e)[PDF]

Clad Stainless Steels and High-Ni-Alloys for Welded …

CLAD STAINLESS STEELS AND HIGH-NI-ALLOYS FOR WELDED TUBE APPLICATION Wolfgang Bretz ... Results of tube welds with mild steel and stainless steel cores ... Welds were produced using on Alloy 316 Ti clad on mild steel sheets and Alloy 625 as the filler metal. The chemical compositions of the welds were nearly the same.

China CuNi Steel Clad Tubesheet - China Clad Tubesheet ...

Clad Tubesheet, Heat Exchanger Tubesheet, CuNi Tubesheet manufacturer / supplier in China, offering CuNi Steel Clad Tubesheet, Rare Bimetallic Silver Copper Clad Plate, Aluminum Base Copper Clad …

Q345 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. Q345 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

7075-T6 Clad Sheet / Plate - Online Metal Store

7075-T6 Clad Sheet / Plate. 7075-T6 Clad Aluminum Sheet is primarily used in aerospace industry, often referred to as the Strongest Aluminum grade. Alloy 7075 has the strength of many steels, while retaining aluminum’s lightweight qualities. "PVC 1 SIDE" refers to a PVC coating the mill adds for protective purposes.

CLAD FLANGES,CLAD PIPE FITTINGS,CLAD PIPES,CLAD …

we can do cladding fittings and cladding pipe . weld overlay serives or hardfacing [email protected] CLAD FLANGES,CLAD PIPE FITTINGS,CLAD PIPES,CLAD BENDS,CLAD TUBE SHEETS,CLAD PLATES,weld cladding,explosion cladding,overlay cladding

Q345 - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. Q345 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

7075-T6 Clad Sheet / Plate - Online Metal Store

7075-T6 Clad Sheet / Plate. 7075-T6 Clad Aluminum Sheet is primarily used in aerospace industry, often referred to as the Strongest Aluminum grade. Alloy 7075 has the strength of many steels, while retaining aluminum’s lightweight qualities. "PVC 1 SIDE" refers to a PVC coating the mill adds for protective purposes.[PDF]

Clad Stainless Steels and High-Ni-Alloys for Welded …

CLAD STAINLESS STEELS AND HIGH-NI-ALLOYS FOR WELDED TUBE APPLICATION Wolfgang Bretz ... Results of tube welds with mild steel and stainless steel cores ... Welds were produced using on Alloy 316 Ti clad on mild steel sheets and Alloy 625 as the filler metal. The chemical compositions of the welds were nearly the same.

copper clad steel sheet - hopkinsplasticsurgery

All-Clad TK™ d5 Stainless-Steel Sauté/Fry Pan | Williams … 25/1/2018· Special Offer: When you spend $500 or more, at one time, on All-Clad (Cookware, Tools, or Electrics) through December 31, 2018, you will receive an All-Clad Stainless Steel Lasagna Pan and two All-Clad branded red cotton oven mitts (retail value… Learn more

304 Stainless Steel Square Tube | Midwest Steel & Aluminum

Stainless steel rectangular tube has excellent high and cold temperature working properties. 304 Stainless Square Tube. 304 Stainless Steel Square Tube has very good formability and can be readily welded by all common methods. 304/304L dual certified. …

Ti- Steel Clad Tube Sheet - Made-in-China

Forged Tube Sheet, Titanium Forged Tube Sheet, Stainless Steel Forged Sheet manufacturer / supplier in China, offering Ti- Steel Clad Tube Sheet, High Quality A182 F316/316L Condenser Drilled Tube Plates, The Lowest Offer Uns S31603 F316 Forged Tube Plates and so on.

Titanium Clad Steel Plates/Sheets/ Tube Sheets - US ...

Titanium Clad Steel Plates/Sheets/ Tube Sheets. Titanium Pipe Fitting September 24, 2016. Titanium Plates/Sheets September 24, 2016. Titanium Clad Steel Plates/Sheets/ Tube Sheets. Material Products. Medical Titanium Products. Titanium Bar/Rod. ... Titanium Clad Steel Tube Sheet . USA Titanium Industry Inc. Related posts. September 25, 2016 ...

China Bimetal Titanium Steel Heat Exchanger Tube Sheet ...

Heat Exchanger, Clad Metal, Tube Sheet manufacturer / supplier in China, offering Bimetal Titanium Steel Heat Exchanger Tube Sheet, Rare Bimetallic Silver Copper Clad Plate, Aluminum Base Copper Clad Metal and so on.

316 stainless steel clad tube for sale

316 stainless steel clad tube for sale. Stainless Steel on ThomasNet: Stainless Steel Suppliers . ... 316 Stainless Steel Sheet is sheared to size or can be cut into shapes or rings on Speedy Metals' high definition plasma cutter. Stainless Steel Tubing in Washington (WA) on ThomasNet.

Tube Sheet Drilling - Peters Machine Inc.

Peters Machine, Inc. has been in business for 36 years and has been specializing in machining and drilling tube sheets and baffles for over 20 years. We have experience with many different materials which include aluminum, carbon steels, stainless steels, Alloy 200, 400, and 625, Hastelloy, Titanium, and explosion clad bonded materials.[PDF]

HEAT EXCHANGER CLADDING

side and the tube side of the heat exchanger. 3. Cladding the tube sheet with material compatible with the tubes can eliminate the potential galvanic corrosion between dissimilar metals. The clad materials typically used on the heat exchangers can be broadly categorized as the following: a. Stainless Steel b. Duplex Stainless Steel c. Copper ...

Titanium Forged Clad Tube Sheet |clad Carbon Steel Plate ...

Professional manufacturer and supplier for titanium forged clad tube sheet |clad carbon steel plate |bundle with tube sheet clad on both sides in heat exchanger in China. Welcome to wholesale the high quality and hot selling products at cheap price with our factory.

China 90 Degree Copper Nickel Steel SA516gr70 Clad Plate ...

China 90 Degree Copper Nickel Steel SA516gr70 Clad Plate Used for Tubesheet, Find details about China CuNi 9010 Plate, 90 Degreen Copper Plate from 90 Degree Copper Nickel Steel SA516gr70 Clad Plate Used for Tubesheet - Hunan Forhome Composite Materials Co., Ltd.

China Stainless Steel Clad Plate Tube Sheet Manufacturers ...

Shop online for stainless steel clad plate tube sheet for sale here with JINGUAN - one of the leading manufacturers and suppliers of stainless steel clad plate tube sheet in China. Welcome to buy cheap price products from our factory here.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.