Tel: +86-371-86151827

astm a572 gr 55 i beam datasheet

Steel grade:astm a572 gr 55 i beam datasheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a572 gr 55 i beam datasheet Introduction

ASTM A572 Grade50,55,60 HSLA Structural Steel Plate-AGICO

ASTM A572 Carbon Steel Plate. ASTM A572 Specification refers to High-Strength Low-Alloy Steel Plate for structural building, among the 5 steel grades of 42, 50, 55, 60 and 65, Grade 50 is one most common steel in applications where need more strength and less weight, use steel plate of this grade other than ordinary carbon steel will make the steel structure with same steel strength but ...

ASTM A572 - SSAB

ASTM A572. The ASTM A572 specification is the Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel for plates, structural shapes, sheet pilings and bars. ASTM A572 includes five grades with specified minimum yield strengths of 42, 50, 55, 60, and 65 ksi, respectively.

ASTM Standard A572 - INFRA-METALS

ASTM A572 Structural Steel Infra-Metals is one of the largest providers of structural beams, angles, channels and more. Our company produces the industry’s best quality steel for construction purposes. We specialize in providing ASTM products, meeting internationally recognized quality and consistency … Continue reading →

A572Gr50 steel plate - steel plates - BEBON INTERNATIONAL

As for the mechanical properties of ASTM A572 Gr.50, 345 Mpa is the yield point levels most closely approximating a geometric progression pattern between 36 ksi min yield point steels covered by Specification A36/A36M and 100ksi min yield point steels covered by Specification A514/A514M.

ASTM A572 Steel, grade 55 - MatWeb

ASTM A572 Steel, grade 55, High-strength low-alloy steel, structural quality

ASTM A572 Gr 60 HEA beams datasheet - masterartguild

ASTM A572 Gr.50/55/60/65 Angles - Katalor Steel Sheet. ASTM A572 Gr.50/55/60/65 angle has high yield and tensile strength, the high tensile strength of A572 Gr.50/55/60/65 angles allows reduction of section thickness and weight in production, so that to lower the overall weight of the part.

A992/A572-50 Beam - MyAlro

A992/A572-50 Beam Alro stocks ASTM A992 (A572 Grade 50) dual certified beams. A992 is the most commonly used structural steel in construction and is used to make I beams, Wide Flange, as well as channels, plates, angles and other shapes.

ASTM A572 Gr.42/50/60/65 H beam steel ----Katalor …

ASTM A572 Gr.42/50/60/65 H beam steel is a kind of high strength low alloy steel plate. it's standard is ASTM. A572 H beam is a high strength low alloy steel used in a variety of structural applications. A572 H beam is produced in Grades 42, 50, 60 & 65—the grades representing the yield strength.

Speedy Metals Information for ASTM A572 Grade 50 Plate

Grade 50 conforms to ASTM A572. ... ASTM A572 Grade 50 is considered a "workhorse" grade and is widely used in many applications. Steel mills produce channel and heavy beams with Grade 50. It is commonly used in structural applications, heavy construction equipment, building structures, heavy duty anchoring systems, truck frames, poles, liners ...

ASTM A992 Hot Rolled Steel Wide Flange Beam (WF) | Buy ...

Buy Metal Online – ASTM A992 Hot Rolled Steel Wide Flange I Beam – Order Large or Small Quantity Online – Cut to Size Steel Wide Flange Beam – No Minimum Order

ASTM A572 / A572M - 18 Standard Specification for High ...

Abstract. This specifiation covers the standard requirements for Grades 42 [290], 50 [345], 55 [380], 60 [415], and 65 [450] of high-strength low-alloy columbium-vanadium structural steel shapes, plates, sheet piling, and bars for applications in bolted, welded, and riveted structures in bridges and buildings.

ASTM A572 Steel, grade 65 - MatWeb

References for this datasheet. Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw ...

A572Gr50 steel plate - steel plates - BEBON INTERNATIONAL

As for the mechanical properties of ASTM A572 Gr.50, 345 Mpa is the yield point levels most closely approximating a geometric progression pattern between 36 ksi min yield point steels covered by Specification A36/A36M and 100ksi min yield point steels covered by Specification A514/A514M.

ASTM A572GR.50/55/60/65 I-beam - Katalor Steel Sheet

A572 GR50/55/60/65 I-beam is high strength, low alloy steel, which is widely used in the construction of steel structures, construction machinery and other steel structures. A572 GR50/55/60/65 Ordinary I-beam, lightweight I-beam flange is tapered by webs of thick. ASTM A572GR.50/55/60/65 I-beam Chemical Composition:

ASTM A572 Gr 60 HEA beams datasheet - masterartguild

ASTM A572 Gr.50/55/60/65 Angles - Katalor Steel Sheet. ASTM A572 Gr.50/55/60/65 angle has high yield and tensile strength, the high tensile strength of A572 Gr.50/55/60/65 angles allows reduction of section thickness and weight in production, so that to lower the overall weight of the part.

ASTM A572 Gr.50/55/60/65 Angles - Katalor Steel Sheet

ASTM A572 Gr.50/55/60/65 is a high-strength, low-alloy steel angles. ASTM A572 Gr.50/55/60/65 angle has high yield and tensile strength, the high tensile strength of A572 Gr.50/55/60/65 angles allows reduction of section thickness and weight in production, so that to lower the overall weight of the part.

A572 Grade 55 beam channel specification mild steel,astm ...

As a A572 Grade 55 beam channel specification Supplier,hot sell astm a36 plate,a36 vs s235jr,astm a36 steel properties,corten a steel properties,S355JR,09CuPCrNi-A,AS1594 Grade 300 equivalent GB T1591 Q345B steel plate,Corten A,Q345D,S355JR,S355J2,S235JR,A516gr.70 heavy steel plate

Astm A36 A572 Gr.50 Steel H Beam

cut, punch, and drill Structural Steel, Angle Irons, H and I Beams, Channels, Bars, BEAMS. ASTM A992/ASTM A572-GR 50 ASTM A992 is currently the most ASTM A572-GR50 is Columbium-Vanadium Steel that offers a minimum yield of 50 ASTM A36 is a Carbon Steel …

ASTM A572 Gr.42/50/60/65 H beam steel ----Katalor …

ASTM A572 Gr.42/50/60/65 H beam steel is a kind of high strength low alloy steel plate. it's standard is ASTM. A572 H beam is a high strength low alloy steel used in a variety of structural applications. A572 H beam is produced in Grades 42, 50, 60 & 65—the grades representing the yield strength.

Astm A572 Grade 50 - [PDF Document]

Bethlehem Steel ASTM A572 Grade 50 3/16 to 1-1/2 in. thick, as-rolled steel plate Pgina 1 de 1 Bethlehem Steel ASTM A572 Grade 50 3/16 to 1-1/2 in. thick, as-rolled steel ... ? astm a36, astm a572 gr 50, astm f1554 gr, 36 & 55 heat treated bar astm a193 97, b16,astm f-1554. ... Nucor Beam Mill ? ASTM A992/ASTM A572-50 Price List (and the ...

A572 Gr.50 - steel-grades

A572 Gr.50. This page provides A572 Gr.50 datasheet, A572 Gr.50 mechanical properties, chemical element A572 Gr.50, technical specifications of A572 Gr.50 steel material properties. A572 Gr.50 performance specifications.

a572-50 steel vs a36 PDF

ASTM A572 Grade 50|A572 Gr.50|A572Gr50 steel plate__Steel ... Gangsteel is specialized in supplying ASTM steel plate in A572 Grade 42,A572 Grade 42,A572 Grade 50,A572 Grade 55,A572 Grade 60,A572 Grade 65 etc.[PDF] MECHANICAL PROPERTIES GRADE 65 STEEL - Lehigh … than.that of st,ructural carbon steel covered by ASTM A36.

ASTM A572 Grade 60 Steel plate - hopkinsplasticsurgery

A992/A572-50 Beam Alro stocks ASTM A992 (A572 Grade 50) dual certified beams. A992 is the most commonly used structural steel in construction and is used to make I beams, Wide Flange, as well as channels, plates, angles and other shapes.

A572 Gr.55 - steel-grades

A572 Gr.55. This page provides A572 Gr.55 datasheet, A572 Gr.55 mechanical properties, chemical element A572 Gr.55, technical specifications of A572 Gr.55 steel material properties. A572 Gr.55 performance specifications.

A572Gr50 steel plate - steel plates - BEBON INTERNATIONAL

A572 Gr50 steel plate, ASTM A572 Gr50 steel plate, under ASTM standard, we can regard A572Gr50 steel plate as low alloy steel .A572Gr50 steel plate is one mainly low alloy steel, ASTM A572Gr42,50,55,60,65 steel is high strength low alloy steel plate sheet which is widely used in plants building, general mansions and all kinds of construction machinery, such as mines and various types …

China ASTM A572 Gr 55 C channel datasheet,A36,A36 steel ...

Home >Product list > ASTM A572 Gr 55 C channel datasheet. p235gh Boiler and Pressure Vessel Steel Plate. P235GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P235GH is weldable fine grain steel. This material is mainly used for building pressure vessels and boilers and pipes for hot liquid.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.