Tel: +86-371-86151827

hardenable straight chromium stainless steel 440a sheet

Steel grade:hardenable straight chromium stainless steel 440a sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hardenable straight chromium stainless steel 440a sheet Introduction

hardenable straight chromium stainless steel 440A sheet

440A (see composition on Page 2) are hardenable, straight-chromium straight-chromium stainless steels, the alloy then has poses. However, Type 440A isnot readily amenable to These alloys are available as plate, sheet, strip and. 440A Stainless Steel | UNS S44002 - Ulbrich Stainless Steels

440a Stainless Sheet - stainless steel sheets suppliers in ...

Martensitic Stainless Steel Type 440A, Hardened + 316°C Temper, Allegheny Ludlum Type 440A is a hardenable straight-chromium stainless steel which combines superior ASTM A276-98b, AISI 440C Stainless Steel Data Sheet[PDF]

Technical Data BLUE SHEET - METSERVE International

Stainless Steel Visit our Website at Types 410, 420,425 Mod, and 440A alleghenyludlum For maximum hardness and strength, a hardening heat treatment is necessary. The stainless steel alloys shown in the table on Page 3 were heated as sheet samples for 60 minutes per inch of thickness at 1800°F (982°C) for Type 410 and at 1900°F (1038°C)

ATI Allegheny Ludlum Martensitic Stainless Steel Type 440A ...

Martensitic Stainless Steel Type 440A, Hardened + 316°C Temper, Allegheny Ludlum Type 440A is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of

440A Stainless Steel UNS S44002 | Ulbrich

Type 440A is a straight chromium martensitic stainless steel which combine the superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainless steels. Learn more here about its applications and properties.

1.4109 ( X70CrMo15 ) / 7Cr17 Hardenable Straight …

Quality Stainless Steel Sheet manufacturers & exporter - buy 1.4109 ( X70CrMo15 ) / 7Cr17 Hardenable Straight Chromium Stainless Steel 440A Sheet from China manufacturer.

440a stainless steel properties - MS Plates

Type 440A is a straight chromium martensitic stainless steel which combine the superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainless steels. Learn more here about its applications and properties. ... stainless steel sheets AISI 440A, UNS S44002, View ... 440A: this is a hardenable stainless ...

Hardenable Chromium Martensitic Stainless Steel Plate

Long Products Stainless Steel Grade Sheet Type 416 is high-hardenabilitymartensitic, 12 per cent chromium stainless steel, which is magnetic in hardened by heat treatment and then can be tempered to meet a wide range ofmechanical. Stainless Steel Types and Myths - Austral Wright Metals. Grade 303 is non hardenable and not recommended for welding.

straight chromium stainless steel - alibaba

Alibaba offers 168 straight chromium stainless steel products. About 13% of these are pipe fittings, 1% are steel pipes, and 1% are mining machinery parts. A wide variety of straight chromium stainless steel options are available to you, such as metal, carbon steel, and stainless steel.

440a stainless steel properties - MS Plates

Type 440A is a straight chromium martensitic stainless steel which combine the superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainless steels. Learn more here about its applications and properties. ... stainless steel sheets AISI 440A, UNS S44002, View ... 440A: this is a hardenable stainless ...[PDF]

440A Stainless Steel, UNS S44002 - Ulbrich

440A Stainless Steel, UNS S44002 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire ASTM A 276 440A Alloy Description Alloy 440A is a high carbon straight chromium martensitic stainless steel. It combines the superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainless steels. It is

1.4109 ( X70CrMo15 ) / 7Cr17 Hardenable Straight Chromium ...

Quality Stainless Steel Sheet manufacturers & exporter - buy 1.4109 ( X70CrMo15 ) / 7Cr17 Hardenable Straight Chromium Stainless Steel 440A Sheet from China manufacturer.

ATI Allegheny Ludlum Martensitic Stainless Steel Type 440A ...

Martensitic Stainless Steel Type 440A, Hardened + 316°C Temper, Allegheny Ludlum Type 440A is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of

440a Steel Properties - stainless steel sheets suppliers ...

AISI 440A Stainless Steel - Special SteelAISI 440A Stainless Steel steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight ... 420, 425 Modified, and 440A (see composition on Page 2) are hardenable, straight-chromium stainless . ATI Steel ATI 440A™ Allegheny Technologies Incorporated. ATI Steel ATI 440A ...

Hardenable Chromium Martensitic Stainless Steel Plate

Long Products Stainless Steel Grade Sheet Type 416 is high-hardenabilitymartensitic, 12 per cent chromium stainless steel, which is magnetic in hardened by heat treatment and then can be tempered to meet a wide range ofmechanical. Stainless Steel Types and Myths - Austral Wright Metals. Grade 303 is non hardenable and not recommended for welding.

440C Stainless Steel Hoja de datos - stainlesssheetsale

AISI 440 Stainless Steel Data Sheet - Simply Bearings Ltd ... 410 is a hardenable, straight-chromium stainless steel which combines superior wear resistance with excellent corrosion resistance. 416 is very similar to 410 with the addition of sulfur to improve machinability. 420 has more carbon than 410, but less than 440. ... International ...

Grades - univstainless

422 Stainless Steel: A hardenable martensitic stainless steel melted as AOD + ESR and has better strength at higher temperatures than a traditional 410 stainless. Bloom Bar RCS Billet Round Bar Flat Bar Ingot. AOD+ESR. 430 Stainless Steel: A fully ferritic, non-hardenable, straight chromium alloy melted as AOD with good corrosion resistance and ...

Types and grades of Stainless Steel Plate // Stainless ...

Straight Grades The straight grades of austenitic stainless steel contain a maximum of .08% carbon. There is a misconception that straight grades contain a …

430 Stainless Steel - Industrial Metals

430 Stainless Steel. Type 430 is a ferritic, non-hardenable straight chromium stainless steel with a good, basic, general purpose corrosion and heat resistance along with good mechanical properties.[PDF]

Martensitic Stainless Steels - Alpha Knife Supply

Stainless Steel Visit our Website at Types 410, 420,425 Mod, and 440A alleghenyludlum For maximum hardness and strength, a hardening heat treatment is necessary. The stainless steel alloys shown in the table on Page 3 were heated as sheet samples for 60 minutes per inch of thickness at 1800°F (982°C) for Type 410 and at 1900°F (1038°C)

400 Series Stainless Steel - Penn Stainless Products ...

The 400 series group of stainless steels has an 11 percent chromium and 1-percent manganese increase, above the 300 series group. ... Penn Stainless stocks the following products in 400 Series stainless steel: Stainless Steel 400 Series Products; ... or hardenable stainless steels, are classified in the 400 series. This series is known for:

440A Stainless Steel Wire | UNS S44002

Ulbrich produces 440A Stainless Steel Wire in Fine Wire, Round Wire, Flat Wire, Square Wire and Shaped Wire Products. Alloy 440A is a high carbon straight chromium martensitic stainless steel. It combines the superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainless steels.

440C Martensitic Stainless Steel Bar - Interlloy

440C Martensitic Stainless Steel Bar: 440C is a high carbon straight chromium high hardenability martensitic stainless steel, generally supplied in the annealed condition with a maximum Brinell hardness of 269 (Rc29) or annealed and cold drawn with a maximum Brinell hardness of 285 (Rc31).

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.