Tel: +86-371-86151827

cold rolled stainless coil

Steel grade:cold rolled stainless coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold rolled stainless coil Introduction

Cold Rolled Coil | North American Stainless

Cold Rolled Coil. NAS provides cold rolled annealed and pickled products in multiple finishes and dimensions. Coils can be supplied in various widths with slitting capabilities both at the mill and at various NAS processing centers throughout the U.S.

Cold rolled stainless steel coil, strip and sheet | Outokumpu

Cold rolled coil, strip and sheet for unmatched versatility. Outokumpu has the ability to produce coils up to two meters in width in Avesta Sweden ( 72 inches in Calvert in the U.S.), as well as the most comprehensive thickness range. Check the thickness range from table below. Strip can be produced in a variety of widths,...

Stainless Coil « Rolled Steel Products

Stainless Coil Rolled Steel Products is a processor and stock metal service center for all grades and thicknesses of stainless coils . Our stainless steel coil can be rolled to …

Good Quality Cold Rolled Stainless Steel Coils & Hot ...

Haozeshun Steel Trade Co.,Ltd is a supplier and exporter of Cold Rolled Stainless Steel Coils, Hot Rolled Stainless Steel Coil and 304 Stainless Steel Coil - a company has good quality products & service from China.

316L cold rolled stainless steel coil - hmmetalmaterial

316L cold rolled stainless steel coil. About 316L material: 316L stainless steel commonly used in the pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials, as well as senior watch bracelet, case and so on.

Cold Rolled Sheet | North American Stainless

Cold Rolled Sheet. NAS offers cold rolled annealed and pickled product in multiple finishes and dimensions. Our cold rolled sheet product is available in variable widths and lengths and as sheets and blanks that can be cut at the mill or at our various processing centers throughout the U.S.

Cold Rolled Stainless Steel Coils, Cold Rolled ... - Alibaba

Alibaba offers 63,763 cold rolled stainless steel coils products. About 60% of these are stainless steel sheets, 11% are steel sheets, and 1% are other boards. A wide variety of cold rolled stainless steel coils options are available to you, such as astm, jis, and aisi.

Stainless steel cold rolled coils, flat products | Marcegaglia

STAINLESS STEEL FLAT PRODUCTS Stainless steel cold rolled coils. Marcegaglia product range of cold rolled stainless steel coils assorted for thickness, width, use and manufacturing standards.[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Cold-Rolled Steel Sheets and Coils are extensively used as basic materials in automobiles, electrical appliances, steel office equipment, various types of containers, and numerous other products closely connected to our daily lives.

Difference Between Hot and Cold Rolled Steel | Metal ...

Cold Rolled. This process will produce steel with closer dimensional tolerances and a wider range of surface finishes. The term Cold Rolled is mistakenly used on all products, when actually the product name refers to the rolling of flat rolled sheet and coil products.

Flat Rolled Steel & Coil Processing Services | Alliance Steel

With years of flat rolled steel processing experience Alliance Steel is a service center you can trust to get the job done right every time. A dedication to providing state-of-the-art coil processing equipment and the latest coil processing technologies makes Alliance Steel a premier steel supply and processing partner.

Steel Coil: Hot Rolled, Annealed, Cold Drawn Brite ...

Universal Stainless produces hot- and cold-rolled steel coil products

What is the difference between hot and cold rolled ...

Dec 26, 2016· Hot Rolled Coil is made as a feedstock for Cold Rolled Coil and coated coil, however also for immediate use during a variety of industrial applications including Steel Tubes used in gas containers, pressure vessels, transport, shipbuilding, construction, and energy pipelines.What is the difference between cold formed and hot rolled ...Sep 09, 2018What is the difference between hot rolled steel and cold ...Sep 09, 2016See more results

316L cold rolled stainless steel coil - hmmetalmaterial

stainless steel sheet / plate / coil. 316L cold rolled stainless steel coil. About 316L material: 316L stainless steel commonly used in the pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials, as well as senior watch bracelet, case and so on.

Flat Rolled Sheet and Coil - Flat Rolled Steel Products ...

Alliance Steel is prepared to support your steel needs with an extensive inventory of flat rolled coil and sheet. We maintain a selection of hot rolled steel, hot rolled pickled and oiled, hot rolled pickled dry, cold rolled steel, motor lam, all coated products and 300 and 400 series stainless steel products. Contact us today.

Strip Coil - Stainless Steel, Nickel Precision | ESM-Hampshire

Strip Steel or Cold-Rolled Strip. Note that the term “cold-rolled” is sometimes mistakenly used on all products, when in reality, the product name refers specifically to flat-rolled sheet and coil products. When referring to bar products, the term used is cold finishing, which consists of cold drawing, and/or turning, grinding and polishing.

Cold rolled stainless steel coil, strip and sheet | Outokumpu

Available for use in a wide variety of applications, Outokumpu cold rolled coil, strip and sheet products are put to work across all industries and markets. Heat- and corrosion-resistant, lightweight yet strong, durable and fully recyclable, stainless steel coil, strip and sheet is exceptionally versatile.

Stainless Steel Sheet and Coil

Stainless Steel Sheet and Coil - Type 316 (120) Cold Rolled, Annealed No. 2B Finish. Can also be furnished: No. 3 Finish - Polished One or Two Sides. No. 4 Finish - Polished One or Two Sides. Non-Magnetic (May be Slightly magnetic when cold worked) Paper Interleaved or Vinyl Masked:

Home - Cold Rolled Steel | Specialty Strip & Oscillating, Inc.

Founded in 1994. Supplier of conventional slit 5/8" to 48" or slit oscillated prime coils in cold rolled low carbon, high carbon, alloy and stainless. Provides oscillated prime coils of steel with 20 to 25 miles of continuous strip. Oscillated coils are continuous, connected by welding and if needed, annealed and ground to gauge.

cold-rolled stainless coil 410 - alibaba

Alibaba offers 7,421 cold-rolled stainless coil 410 products. About 67% of these are stainless steel sheets, 7% are steel sheets. A wide variety of cold-rolled stainless coil 410 options are available to you, such as aisi, astm, and jis.

Quality Stainless Steel Strip Coil & 304 Stainless Steel ...

We are good quality supplier of Stainless Steel Strip Coil, 304 Stainless Steel Coil 201 Stainless Steel Coil from China. 420J1 420J2 Cold Rolled Stainless Steel Strip Coil 0.3 - 3.0mm Thickness. 309S 310S Stainless Steel Coil , Heat Resistance Stainless Steel Sheet Coil.

Home - Stainless Steel Coil/Strip

Cold Rolled Stainless Steel Coil Cold rolled stainless steel coil is one of our popular products. Both hot rolled and... May 28, 2015 January 31, 2019 Leave a Comment on Cold Rolled Stainless Steel Coil. Thin Stainless Steel Strip. Products admin.

Stainless Steel Sheets, Cold Rolled Steel & Galvanized ...

Stainless Steel Flat Rolled Coil Rolled Steel Products offers the following types of Stainless Steel Flat Rolled Coil Austenitic stainless steels contain chromium and nickel (300 Series types) as well as chromium, nickel and manganese (200 Series types). Most stainless slit coils can be hardened by cold-working but not by heat treatment. ...

Steel Coil: Hot Rolled, Annealed, Cold Drawn Brite ...

Universal Stainless produces hot- and cold-rolled steel coil products

Cold Rolled Steel Suppliers - ThomasNet

thomasnet› Supplier DiscoveryCustom manufacturer of cold rolled steel. Products include cold rolled annealed carbon steel & cold rolled annealed stainless steel. Available in thicknesses from 0.004 in. to .125 in. in carbon & alloy grades in bright blue, bronze & blue finishes Capabilities include CNC machining, saw cutting, turning, milling, planning & sanding.

Cold Rolled JIS G4305 Stainless Steel Plate,Sheet Metal ...

JIS G4305 is the standard for Cold rolled stainless steel plates.Linkun is a leading China Steel Plate/Coil manufacturer and supplier, if you are looking for jis g4305 stainless steel plate/coil, please feel free to contact us.

Steel Coils for Sale | Hascall Steel Company

Cold Rolled. A cold rolled metal coil is manufactured by removing rust from a hot rolled coil, soaking it in acid, then washing and drying the sheet. The sheet then passes through a reducing mill under pressure. Unlike hot rolled steel coil, it is a more finished product with a smoother surface. It also has greater strength and durability.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.