Tel: +86-371-86151827

hot rolled 1 0 10 mm carbon steel sheet

Steel grade:hot rolled 1 0 10 mm carbon steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot rolled 1 0 10 mm carbon steel sheet Introduction

[PDF]

Hot-Rolled Steel Sheets and Coils

Sumitomo Metal manufactures a wide range of Hot-Rolled Steel Sheets and Coils in accordance with Japanese Industrial Standards (JIS), the standards of other countries, and our own strict standards. Our Hot-Rolled Steel Sheets and Coils are applied to a wide range of uses such as,

Scope Information: Hot Rolled Carbon Steel Flat Products ...

25 percent for thicknesses of 2 mm and above. Hot-rolled bearing quality steel, SAE grade 1050, in coils, with an inclusion rating of 1.0 maximum per ASTM E 45, Method A, with excellent surface quality and chemistry restrictions as follows: 0.012 percent maximum phosphorus, 0.015 …

Carbon Steel || Sheet Steel - Rolled Steel Products

As a registered ISO 9001:2008 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.[PDF]

Section 1 Identification - United States Steel Corporation

Hot or Cold Rolled Steel Sheet/Strip and Hot Rolled Skelp USS IHS No.: 52297 Rev. 8/18 Page 3 of 9 Section 7 - Handling and Storage 7(a) Precautions for Safe Handling: Not applicable for Hot or Cold Rolled Steel Sheet/Strip and Hot Rolled Skelp as sold/shipped, however further processing (welding, burning, grinding, etc.) with the potential for generating high concentrations of airborne ...[PDF]

HOT ROLLED CARBON STEEL SHEET (330 N/mm TENSILE)

HOT ROLLED CARBON STEEL SHEET (330 N/mm2 TENSILE) 1.0 GENERAL: This specification governs the quality requirements of Hot Rolled Carbon Steel Sheet of thickness of 2.5 mm to 4.0 mm …[PDF]

AISI Thickness Tolerance Ranges - SPECTRA Resources

AISI Thickness Tolerance Ranges Carbon Steel Sheets/Hot Rolled - H.R.P&O - Cold Rolled Weight equivalents based on density of .2904 lb. per cubic inch Cold rolled gages 4 through 10 – tolerances shown are for widths over 46” to 72” inclusive

Scope Information: Certain Hot-Rolled Carbon Steel Flat ...

For the purposes of this Suspension Agreement, “hot-rolled steel” means certain hot-rolled flat-rolled carbon-quality steel products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed ...

0.125" (11 GA) ASTM A1011 Hot Rolled STEEL SHEET - Online ...

Hot Rolled Steel Sheet A1011 (0.125" - 11 GA) is made of low carbon steel that is commonly found in most industries as it is a high strength, highly formable steel, commonly used to create drums, containers, and in general fabrication. Unlike cold rolled steel, Hot Rolled Steel Sheet A1011 has a rougher surface and with galvanization, it can resist corrosion well.[PDF]

CHATHAMSTEELCORPORATION 25 HOT ROLLED BLACK …

chathamsteelcorporation 25 hot rolled black sheets commercialqualitya-569 size(in.) nom.thickness weightpersheet ... hot rolled carbon steel plates regularquality.33max.carbon astma283graded astma36 ... 8 2 5.12 10 7 8 11 ⁄ 16 28 . 09 58 1 0 7.2 1⁄2 36 3 ...

0.125" (11 GA) ASTM A1011 Hot Rolled STEEL SHEET - …

Hot Rolled Steel Sheet A1011 (0.125" - 11 GA) is made of low carbon steel that is commonly found in most industries as it is a high strength, highly formable steel, commonly used to create drums, containers, and in general fabrication. Unlike cold rolled steel, Hot Rolled Steel Sheet A1011 has a rougher surface and with galvanization, it can resist corrosion well.

Scope Information: Certain Hot-Rolled Carbon Steel Flat ...

For the purposes of this Suspension Agreement, “hot-rolled steel” means certain hot-rolled flat-rolled carbon-quality steel products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed ...[PDF]

ASTM-AISI THICKNESS TOLERANCE RANGES H.R. FLAT …

h.r. flat bar hot rolled mild steel 3/4x 1 2.550 51.00 1-1/4 3.188 63.76 1-1/2 3.825 76.50 1-3/4 4.463 89.26 2 5.100 102.00 2-1/2 6.375 127.50 3 7.650 153.00 3-1/2 8.925 178.50 4 10.200 204.00 4-1/2 11.480 229.60 5 12.750 255.00 5-1/2 14.030 280.60 6 15.300 306.00 7 17.850 357.00 8 20.400 408.00 7/8x 1 2.975 59.50 1-1/4 3.719 74.38 1-1/2 4.463 89.26 1-3/4 5.206 104.10 2 5.950 119.00 2-1/4 6 ...[PDF]

Hot Rolled Carbon Steel Reinforcing Bars - gerdau

Hot Rolled Carbon Steel Reinforcing Bars Safety Data Sheet 760 according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 08/23/2018 Version: 3.0 08/23/2018 EN (English US) SDS ID: 760 Page 1 SECTION 1: Identification 1.1. Identification Product form : Mixture Product name : Hot Rolled Carbon ...

Asian Metal - Sheet/Coil prices, news and research

Hot Checkered Plate Q235 size 1.60mm to 3.20mm x 1200mm x 2400mm about 750 MT. Anonymous buy Hot Rolled Steel Coil JIS G3131 SPHC Hot Rolled Steel Coil JIS G3131 SPHC Size : 1.00mm to 1.75mm x 1200mm x C = 3,000 - 5,000 MT per month Coil I.D. : 760mm Coil weight : 15MT/MAX Anonymous buy CRC

CARBON STEEL PLATE - 1" Thick, Hot Rolled Steel Plate, Hot ...

Order CARBON STEEL PLATE - 1" Thick, Hot Rolled Steel Plate, and Hot Rolled Steel in small quantities and no minimums at The Metal Store. ... HRPO (Hot Rolled Pickled & Oiled) Sheet Hot Rolled Steel Plate ... All cuts are guaranteed to be +.125" -0" (+1/8" -0"). Please note that custom cuts of less than 1 inch will be priced at the 1 full inch ...

teel grades - stahlo.de

Mild steels - continuously hot rolled low carbon steel sheet and strip for cold forming acording to DIN EN 10111 Designation Mechanical properties (transverse direction) Chemical composition Steel ... 0 = 80 mm L 0 =5,65 √S 0 S315MC 1.0972 315 390 - 510 20 24 0,12 1,30 0,50 0,025 0,020 0,015 0,09 0,20 0…

Tata Steel - Automotive - Hot rolled steel

tatasteeleurope› Home› Products› AutomotiveHot-rolled steel offers performance, versatility and value. Our hot-rolled strip steel range includes forming and high-strength, advanced and ultra high-strength steels. All are specially designed for components commonly requiring higher thickness and durability within chassis and wheel systems.

Cold Rolled 1008 Steel Sheet - stockcarsteel

1008 Cold Rolled Steel is a standard grade Carbon Steel. This alloy is generally used for "commercial quality" cold rolled steel sheet. It is an economical, general purpose steel grade offering moderate strength and toughness.

Steel Thickness Tolerances Chart - Simons Consulting

Cold rolled gages 4 through 10 - tolerances shown are for widths over 48" to 72" inclusive. Hot rolled and P. & O. age 4 through 18 - tolerances shown are for widths over 40" to 48" inclusive. All other age over 15" to 72" inclusive.

Carbon Steel Perforated Sheets - Carbon Steel - Grainger ...

Grainger carries a wide selection of carbon steel perforated sheets that are ideal for use in a variety of applications from patio furniture to ventilation panels for electronics. Constructed of carbon steel, they come in a range of gauges, hole shapes and are available in both mill and galvanized steel finishes.

Square - Perforated - Carbon Steel - 16980011 | McNICHOLS

1698001141, 16980011M7 McNICHOLS stocks Perforated Metal, Square Pattern, Carbon Steel Hot Rolled, 11 Gauge, 3/4" Square on 1" Centers, Straight Row Hole Pattern, 56% Open Area, Mill Finish, Sheet, Solid Margin Both edges. Call or email us for a quote today.

Steel Sheets - MSCDirect

mscdirect› …› Metals› Steel› Steel SheetsDiscover Steel and other Metals at MSC Industrial Supply. Over 1 million products that ship and deliver fast.[PDF]

High carbon and quenchable steels - ArcelorMittal …

Steel is generally classified as high carbon steel if the nominal carbon content exceeds 0,30%. High carbon steel is generally supplied in the as rolled condition to analysis only. ... Data Sheet: A2.2 High carbon and quenchable steels ... Available dimensions for Hot Rolled Coil1 Specification Width (mm) Thickness (mm) SAE 1030 1 185 - 1 280 2 ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.