Tel: +86-371-86151827

astm a285 gr b steel plate data sheet

Steel grade:astm a285 gr b steel plate data sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a285 gr b steel plate data sheet Introduction

ASTM A285 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A285. The ASTM A285 specification is the Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength intended for fusion-welded pressure vessels. Three grades having different strength levels are available in thicknesses up to 2", inclusively.

ASTM A285 GR C Steel Plate-GNEE GROUP Discount Steel …

Product Introduction. A285 Gr C Boiler & pressure vessel steel plates,also named as pressurevessel steel plates which including carbon steel and alloy steel for High or intermediate and low temperature services.Main steel grades in boiler steel plates supplied by Xinsteel were approved by Germany’s TUV and UK’s Lloyd’s Register.. Our boiler steel plates mainly used in b oiler steel ...

ASTM A285 Grade B steel plate ... - steel-plate-sheet

ASTM A285 Grade B steel plate is intended for use in standard tanks and boilers rather than high pressurised vessels due to its lower yield strength. With good forming and welding characteristics, ASTM A285 Grade B steel plate is supplied throughout the oil gas and petrochemical industry.

ASTM A285, Grade B - MatWeb

Data sheets for over 130,000 metals, ... ASTM A285, Grade B Categories: Metal; Ferrous Metal; ASTM ... or rimmed steel. These plates are intended for fusion-welded pressure vessels. The maximum plate thickness under ASTM A285, for reasons of internal soundness, is 2 in. [50 mm] for all grades. For killed carbon steels only refer to the ...

ASTM A285 Grade C steel plate Carbon Equivalent steel ...

A285 Grade C steel plate is normally supplied the as-rolled condition.ASTM A285 Grade C steel plate may be ordered normalized or stress relieved,or both.As ASTM A285 Grade C steel plate doesn’t promote high tensile strength,it is used commonly in the fabrication of storage tanks and low pressure temperature controlled vessels.. ASTM A285 Grade C steel plate is found throughout industry in a ...

ASTM A285 - SSAB

ASTM A285. The ASTM A285 specification is the Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength intended for fusion-welded pressure vessels. Three grades having different strength levels are available in thicknesses up to 2", inclusively.

ASTM A285 and ASTM A283 steel plate comparsion - AGICO

With 3 steel grades (Grade A, Grade B, Grade C) covering tensile strength range from 310-515Mpa,usually ASTM A285 steel plate is delivered as-rolled condition. made by killed, semi-killed, capped or rimmed steel practices according to the end users’ requirement.

ASTM A285 Grade B|A285 Gr.B|A285GrB STEEL PLATE__Steel ...

Gangsteel is specialized in supplying A285 Grade B,A285 Gr.B,A285GrB ASTM A285 steel plate in A285 grade B,A285 Gr.B,A285 Gr B.A285GrB For boiler steel plate.

SA204 Grade B data sheet - MS Plates - napmr.org

This carbon / molybdenum grade is used almost exclusively in Refinery / Petrochemical applications.ASTMA-285/SA-285M has three grades or plates,ASTM A285 Gr.B Middle or low strength carbon steel sheet.These pressure vessel steel plates A285 Gr A,A 285 Gr B ASTM A 283 Gr is a specification for low and intermediate strength steel

ASTM A285 Grade C Middle or low strength carbon steel ...

A285 Grade C Specification : A285 Grade C is a kind of common carbon steel, whose tensile is low or mid-low. There are three grades or levels material GR A/B/C in the standard ASME SA-285/SA-285M. Plates ordered to this specification A285 Grade C are normally in the as-rolled condition.

ASTM A283/ ASME SA283 PVQ Steel Plate | BBN Steel

astm a131 a&b / abs a&b astm a131 / abs ah36 / abs dh36 / abs eh36 api 2h grade 50 astm a633 PVQ Steel Plate ASTM A516/ ASME SA516 ASTM A537/ ASME SA537 ASTM A283/ ASME SA283 ASTM A285/ ASME SA285

ASTM A516 A516M hot rolled pressure vessel plate data ...

ABS Grade A general strength shipbuilding steel plate technical data sheet;stockist of steels Material Property Data Sheet for ... Dubai ASTM / ASME A516 Gr 70 Mild Steel Hot Rolled ... for A516-70 plate is PVQ Plate (Pressure Vessel ...ASTM A285/ A285M Grade A Pressure Vessel Steel Plate TJC Steel can supply A285 Grade A/ A285 GrA pressure ...

A285 PVQ Steel Plate - ASTM A285 Grade C | Leeco Steel, …

leecosteel› …› Pressure Vessel (PVQ) Steel PlateLeeco Steel distributes A285 PVQ steel plates that are intended for fusion-welded pressure vessels. ASTM A285 plates are normally supplied in the as-rolled condition. Our A285 steel plates are used in a variety of industries including construction, military, and more. We offer various thicknesses, lengths, and widths to meet your specifications.

ASTM A516 GR 60/70 Steel Plate-GNEE GROUP Discount Steel …

DC01 Steel Sheet SPCC-SD Steel Coil ... Our boiler steel plates mainly used in b oiler steel products and engineering, oil and gas companies,chemical industry,power plants for making the Reactor,Heat Exchange,Separator,Spherical Tanks,Tanks of oil gas,Nuclear reactor pressure shell ... ASTM A285 Gr C. B oiler vessel steel. 0.28-0.9. 0.035.

A285 Grade A steel grade - MS Plates - napmr.org

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find A285 Grade A steel grade, MS Plates plate/sheet bar supplier, A285 Grade A steel grade, MS Plates plate/sheet bar manufacturer, A285 Grade A steel grade, MS Plates plate/sheet bar exporter, please contact steel's sales team.

ASTM A285 Grade B vs. ASTM A36 Carbon Steel :: …

Both ASTM A285 grade B and ASTM A36 carbon steel are iron alloys. Both are furnished in the as-fabricated (no temper or treatment) condition. Their average alloy composition is basically identical. For each property being compared, the top bar is ASTM A285 grade B and the bottom bar is ASTM A36 carbon steel.

ASTM A285, Grade C - MatWeb

ASTM A285, Grade C Categories: Metal; ... Pressure Vessel Steel. Material Notes: This specification covers low and intermediate tensile strength carbon steel plates produced as killed, semi-killed, capped, or rimmed steel. These plates are intended for fusion-welded pressure vessels. The maximum plate thickness under ASTM A285, for reasons of ...

Delta Steel, Inc. - Plate

Welcome to Delta Steel, Inc., one of the largest service centers in the southwestern United States consisting of an excellent management team and dedicated professionals throughout. We are a customer oriented company with over a 50 year history of continued growth and profitability. A deep and diverse inventory, combined with the best processing equipment in the industry, makes Delta Steel the ...

ASTM A285, Grade C - MatWeb

ASTM A285, Grade C Categories: Metal; ... or rimmed steel. These plates are intended for fusion-welded pressure vessels. The maximum plate thickness under ASTM A285, for reasons of internal soundness, is 2 in. [50 mm] for all grades. ... To see MatWeb's complete data sheet for this material (including material property data, metal ...[PDF]

Data Sheet 1 ASTM A514 Grade B - SSAB

ASTM A514 Grade B is a quenched and tempered alloy steel plate for structural applications ... Thickness, width, and length tolerances for A514 Grade B steel plate are in accordance with the requirements of ASTM A6. The flatness tolerance for as supplied product is ½ ASTM A6. ... ASTM A514 Gr B data sheet 2012 04 01.docx

Boiler steel plate A285 Grade A,A285-A ASTM specification

Xinsteel’s advantage of supplying A285/A285M A285 Grade A Pressure vessel steel plate I.Professional in steel knowledge for guanrantee steel property. II. Widest steel resources for accepting customers’ small orders. III. Closest relationships with china national mills for guanrantee delivery time and even delivery in advance.

ASTM A285 Steel Plates - Gangsteel

Gangsteel is specialized in supplying ASTM A285 steel plate in A285 grade C,A285 Grade A,A283 Grade B steel plate,A285GrC,A285 Gr.C A285 Grade C,A285 Gr.C,A285GrC

0.125" (11 GA) ASTM A1011 Hot Rolled STEEL SHEET - …

Hot Rolled Steel Sheet A1011 (0.125" - 11 GA) is made of low carbon steel that is commonly found in most industries as it is a high strength, highly formable steel, commonly used to create drums, containers, and in general fabrication. Unlike cold rolled steel, Hot Rolled Steel Sheet A1011 has a rougher surface and with galvanization, it can resist corrosion well.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.