Tel: +86-371-86151827

non alloy and alloy steel plates with specified elevated tem

Steel grade:non alloy and alloy steel plates with specified elevated tem

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

non alloy and alloy steel plates with specified elevated tem Introduction

P265GH Steel - Heat Resistant & Non-Alloy

Download PDF What is P265GH? Grade P265GH is the Heat Resistant Pressure Vessel Steels defined in the EN 10028 system. It is a non-alloy steel. The material is designed for high temperature applications. Therefore it is mostly utilized in high temperature applications in the oil and gas sector, chemical processing industries and petrochemical sectors.

Alloy And Non alloy Steel Plates For Boilers

alloy steel plate for boilers - alibabaRelated Searches for alloy steel plate for boilers: plate and structural steel scrap stainless steel deck plate alloy steel plate price per kg rolled alloy steel sheet plate hot sell low alloy steel plates hastelloy alloy steel c 276 plate heat resistant alloy steel plates prime hot rolled alloy steel plate alloy steel high speed steel sheet astm high ...

16Mo3 / 1.5415 European Alloy Steels – Piping Components ...

The chromium(Cr) improves the resistance to high-temperature hydrogen attack and graphitization. (1) EN 10216-2: Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties.

p355 elevated temperature properties - MS Plates

P355 GH steel plates is a material for boiler and pressure vessel steel.. P355 GH steel Application : P355GH pressure vessels steel plates are all with specified elevated temperature properties. The standard specifies requirement for flart products for pressure vessels equirement made of welded non-alloy steel plates.

Grades properties comparison - European Steel and Alloy ...

Non-alloy and alloy steels with specified elevated temperature properties. ... EN 10028-2: 2009 Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature properties ... 2009 Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature ...[PDF]

Flat products made of steels for pressure purposes - …

Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties The European Standard EN 10028-2:2003 has the status of a British Standard ICS 77.140.30; 77.140.50

16Mo3 Chrome Moly Steel|16Mo3 Steel|16Mo3 Steel Plate | …

16Mo3 Steel Plate . 16Mo3 is a EN10028 specified pressure vessel grade chrome molybdenum steel alloy for use in elevated working temperatures.. The material is used as a weldable steel in the fabrication of industrial boilers and steel pressurised vessels found in the oil, gas and chemical industry.

p265gh properties high temperature - MS Plates

Pressure Vessel Steel Plate Low Alloy High Strength Steel Boiler Steel Plate Alloy Steel Plates which is non alloy and alloy steels with specified elevated temperature properties. P265GH grades are used above all for manufacturing Gangsteelis specialized in supplying EN10028-2 steel plate in grade P265GH. For more information of P265GH

ISO 9328-2 - Steel flat products for pressure purposes ...

Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties This part of ISO 9328 specifies the technical delivery conditions for plates and strip for pressure equipment made of non-alloy and alloy steels as specified in Tables A.1 and B.1.[PDF]

AS 1548-1995 Steel plates for pressure equipment

elevated temperature properties and EN 10028-2—1992, Flat products made from steel for pressure purposes, Part 2: Non-alloy and alloy steels with specified elevated temperature properties. A provision has been made to supply plates to three levels of reduction of area requirement in a through-thickness direction.

Seamless steel tubes for low-temperature service

This part of EN1026 specifies the technical delivery conditions in two test categories for seamless tubes for circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel. Seamless steel tubes for pressure purposes. EN 10216-1 Non-alloy steel tubes with specified room temperature properties

BS EN 10028-2:2017 Flat products made of steels for ...

This standard is about how flat steel sheet and plate should be produced for the construction of safe pressure equipment. This part specifies requirements for flat products for pressure equipment made of weldable non-alloy and alloy steels with elevated temperature properties as specified in Table 1.

BS EN 10028-2:2009 - Flat products made of steels for ...

BS EN 10028-2:2009 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties. BS EN 10028-2 is the European standard that specifies requirements for flat products for pressure equipment made of weldable nonalloy and alloy steels with elevated temperature properties as specified.

bs en 10028-3 elevated temp properties - steel grade steel ...

BS EN 10028-1:2003 Non-alloy and alloy steels with specified elevated temperature properties: Grades 5, 9, 11, 12, 22 and 91 Class 1 and 2 for elevated temp + corrosion Chromium - Molybdenum Alloy Steel Plates. SA-203 Steel Plate Grades A, B, D, E and F Nickle Alloy Steel Plates. For low temperatures (-150 deg F)

BS EN 10028-2:2009 - Flat products made of steels for ...

BS EN 10028-2:2009 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties. BS EN 10028-2 is the European standard that specifies requirements for flat products for pressure equipment made of weldable nonalloy and alloy steels with elevated temperature properties as specified.

EN10028-2 Alloy Steel Plate P265GH|P355GH|16Mo3 - ANSON STEEL

Product Scope: Steel plate product available by EN10028-2 standard includes 5 steel grades: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10. EN 10028-2 is the European standard that specifies requirements for steel plate and sheet products for pressure equipment made of weld-able non-alloy and alloy steels with elevated temperature properties as specified.

p355gh properties - natural-elements-online

P355GH steel grade is one of grade in En10028-2, which is non alloy and alloy steels with specified elevated temperature properties. P355GH grades are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids. EN 10028 P355GH,EN 10028 P355GH steel plate,EN 10028 ...

BS EN 10253-2-2007 Butt welding pipe fittings non alloy ...

1 Scope. This Part of EN 10253 specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of carbon and alloy steel which are intended for pressure purposes at room temperature, at low temperature or at elevated temperatures, and for the transmission and distribution of fluids and ...

P265GH / 1.0425 Non-alloy quality steel - equivalent ...

P265GH / 1.0425 Non-alloy quality steel - equivalent, chemical composition, properties ... 2009 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties: EN 10216-2: 2014 Seamless steel tubes for pressure purposes. ... Non-alloy and alloy steel tubes with specified elevated ...

EN P295GH service temperature - steel grade steel material

EN 10028-2 P295GH pressure vessel steel plate. EN 10028-2 Flat products made of steel for pressure purposes-part 2: Non-alloy and alloy steels with specified elevated temperature properties. ASME_SA204 steel plate. ASME SA553 Type II Ni-alloy steel plates for pressure vessels SA553 Type II in the standard SA553/SA553M is a kind of Ni alloy

temperature properties of en10216 2 16mo3 - Mild Cold ...

Z-GROUP Steel holding is the noteworthy successor of a long tradition of Czech-Moravian Non-alloy steel tubes with specified room temperature properties PART 2: Non-alloy and alloy steel tubes with specified elevated temperature 16Mo3 / St35.8, St45.8, 15Mo3, 20, 15020 Seamless boiler steel tubes - standards EN / DIN / TU. 13 LENGTH

P235GH / 1.0345 Non-alloy quality steel - equivalent ...

P235GH / 1.0345 Non-alloy quality steel - equivalent, chemical composition, properties ... 2009 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties: EN 10216-2: 2014 Seamless steel tubes for pressure purposes. ... Non-alloy and alloy steel tubes with specified elevated ...

EN10216 Standard specification - Alloy Pipe, Seamless ...

Non-alloy and steel tubes with specified elevated temperature properties.(include amendment A1:2004). This part of EN1026 specifies the technical delivery conditions in two test categories for seamless tubes for circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.

En10028 p355gh steel plate - srilankasports.org

Steel plate product available by EN10028-2 standard includes 5 steel grades P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10. EN 10028-2 is the European standard that specifies requirements for steel plate and sheet products for pressure equipment made of weld-able non-alloy and alloy steels with elevated temperature properties as specified.

1.0425 DIN :: Total Materia

1.0425, DIN, DIN EN 10028-2, Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties, DIN EN 10273, Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties, DIN EN 10216-2, Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and ...

ISO 9328-2:2011 - Steel flat products for pressure ...

iso.org› …› Browse by ICS› 77› 77.140› 77.140.50iso 9328-2:2011 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties This standard has been revised by ISO 9328-2:2018

High temperature steel - imoa.info

Molybdenum in solid solution reduces the creep rate of steel very effectively. It slows the coagulation and coarsening (Ostwald ripening) of carbides during high-temperature service. The best results in terms of elevated-temperature strength are obtained by quenching and tempering to produce a microstructure consisting of upper bainite.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.