Tel: +86-371-86151827

prime quality asme sa537 class 2 steel plate

Steel grade:prime quality asme sa537 class 2 steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

prime quality asme sa537 class 2 steel plate Introduction

ASME SA537 Class 2 Steel Plates, ASTM A537 Class 2, SA 537 ...

ASME SA537 Class 2 Plate material is used in a variety of applications including pressurised tanks and heat exchangers. ASTM A537 CL.2 Boiler Quality Steel Plates steel shall be killed and undergo normalization, quenching and tempering. SA537 Class 2 Pressure Vessel Plates is mainly used for manufacture in the oil and gas and petrochemical industries.

ASME SA517 prime quality pressure vessel plate Chemical ...

ASME SA516 Gr.65 multifunctional pressure vessel plate exporter; ASME SA537 prime quality pressure vessel plate specification; ... ASME SA542 Grade B Class 3 alloy steel plates for pressure vessels ..... 70 boiler and pressure vessel Steel Plate,special ... Steel Plates Chemical Composition of ASME SA516 ... sheet prime quality plate supplier ...

ASME SA517 Grade A prime quality pressure vessel plate ...

BBN STEEL supply ASME SA517 Grade A prime quality pressure vessel plate mill, pressure vessel steel plate used in the oil and gas. ... Pressure Vessel Steel plate ,ASME SA517 Grade P ...ASME SA537 Class 1/2 Pressure Vessel Steel Plates ... Distributors of Boiler Quality, Pressure Vessel, ... A/ASME SA841 Grade B2 HSLA for Pressure Vessels ...

ASME SA537 Class 2 steel plate-S355J2,S35J2G3,S355JR ...

Adopt standard: ASME SA537 . Steel plate SA537 CL2 is a quenched and tempered steel material, higher tensile and yield in property comparing with SA537 CL1 and SA537 CL3.. SA537 CL2 steel plate max thickness is 150mm according to standard of SA537/ SA537 standard. But if customers more thickness above 150mm, our mill also could produce them.

ASME SA537 Class 1 Steel Plates, ASTM A537 Class 1, SA 537 ...

ASME SA537 Class 1 Plate material is used in a variety of applications including pressurised tanks and heat exchangers. ASTM A537 CL.1 Boiler Quality Steel Plates steel shall be killed and undergo normalization, quenching and tempering. SA537 Class 1 Pressure Vessel Plates is mainly used for manufacture in the oil and gas and petrochemical industries.

ASME SA537 Class 2 steel plate for pressure vessels

ASME SA537 Class 2 is a kind of steel plate used for pressure vessel plates, heat-treated, carbon-manganese-silicon steel.It is in the American standard ASME SA537 .And ASME SA537 Class 2 plates shall be normalized.There are three steel grades or lev

ASTM A537/ ASME SA537 PVQ Steel Plate | BBN Steel

A537 is a heat-treated, carbon manganese-silicon, steel plate grade. Typical applications include pressure vessels designed for moderate and lower temperature service requiring excellent notch toughness as well as API storage tanks. Class 1 material is produced in the Normalized condition class 2 is produced as Quench and Tempered.

asme sa537 cl1 - MS Plates - napmr.org

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find asme sa537 cl1, MS Plates plate/sheet bar supplier, asme sa537 cl1, MS Plates plate/sheet bar manufacturer, asme sa537 cl1, MS Plates plate/sheet bar exporter, please contact steel's sales team.

A537 CL2 steel plate - BEBON INTERNATIONAL

ASTM A537 CL2 steel plate/sheet,ASTM A537 CL2 steel plate/sheet, under ASTM standard, we can regard A537 CL2 steel plate/sheet for simple pressure vessels steel.. A 537 Class 2 carbon steel plates are engineered to be used in pressure vessel applications.ASTM A537 Class 2 steel is a higher yield and tensile strength material used in the fabrication of pressurised vessels and steel boilers. the ...

ASME SA537 Class 2 steel plate-S355J2,S35J2G3,S355JR ...

Adopt standard: ASME SA537 . Steel plate SA537 CL2 is a quenched and tempered steel material, higher tensile and yield in property comparing with SA537 CL1 and SA537 CL3.. SA537 CL2 steel plate max thickness is 150mm according to standard of SA537/ SA537 standard. But if customers more thickness above 150mm, our mill also could produce them.

ASME SA537 Class 2 Steel Plates and ASTM A537 Class 2 ...

Prosaic Steel and Alloys stock ASTM A537 Class 2 pressure vessel steel plates. Large stocks of plates certified to ASME SA537 Class 2 and ASTM A537 Class 2 are held in our warehouse and processing facilities. we specialized in supplying A537 steel plate in A537 Class 2 and ASME SA537 Class 2, Distributor of A537 Class 2 Plates all over the world.

ASME SA537 Class 2 steel plate for pressure vessels

ASME SA537 Class 2 is a kind of steel plate used for pressure vessel plates, heat-treated, carbon-manganese-silicon steel.It is in the American standard ASME SA537 .And ASME SA537 Class 2 plates shall be normalized.There are three steel grades or lev

asme sa537 cl1 - MS Plates - napmr.org

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find asme sa537 cl1, MS Plates plate/sheet bar supplier, asme sa537 cl1, MS Plates plate/sheet bar manufacturer, asme sa537 cl1, MS Plates plate/sheet bar exporter, please contact steel's sales team.

ASME SA203 Grade A prime quality pressure vessel plate ...

EN10028-3 P355NL2 prime quality pressure vessel plate mill Henan BEBON Iron & Steel Co., Ltd was founded in 2000,with a good reputation in national steel market, we have established international business since 2000,after so many years operation,our clients spreads over all the world.

ASTM A537/ ASME SA537 PVQ Steel Plate | BBN Steel

A537 is a heat-treated, carbon manganese-silicon, steel plate grade. Typical applications include pressure vessels designed for moderate and lower temperature service requiring excellent notch toughness as well as API storage tanks. Class 1 material is produced in the Normalized condition class 2 is produced as Quench and Tempered.

ASME SA387 GR.11 CL. 1 Alloy Steel Plate, ASTM A387 …

RPF Pipes & Fittings - leading Suppliers of Alloy Steel Plates, Alloy Steel SA387 GR 11 CL. 1 / 2 Plates, ASTM A387 Grade 11 Class 1 Chrome Moly Plates, Chromium-Molybdenum Steel SA387 GR. 11 CL.2 Plate, ASME SA387 GR.11 CL. 1 /2 Pressure Vessel Plates in Gujarat, India.

BBN Steel Supply prime quality asme sa203 gr b plate,A36 ...

ASME SA202 Gr.A steel grade supplier-BBN STEEL sale steel ... ASME SA537 Class 2 prime quality pressure vessel plate supplier A516 Gr.70 hot rolled pressure vessel plate application ASTM A387 Grade 22 China pressure vessel plate equivalent ... SA203 GR D steel plate SA203 GR A, SA203 GR B, SA203 GR C, SA203 GR D steel grades are nickel alloy ...

ASME SA537 Class 1 steel plates for pressure vessels good ...

ASME SA537 Class 1 is a kind of steel plates material,SA537 Class 1 is used to fabric high temperature pressure vessels in ASME standard, In order to meet the property of standard ASME SA-537/SA-537M, SA537 Class 1 steel must be done heat-treatment. Standard:ASME SA-537/SA-537M .

15CrMoR SA537CL1 16mo3 steel plate - srilankasports.org

ASME SA537CL1 prime quality pressure vessel plate ... Boiler steel plate,ASME SA537 Class 1(SA537CL1) Pressure Vessel Steel plate ,ASME ...ASME SA537CL1, SA537CL1 STEEL PLATE, SA537CL1 Mill . Gangsteel supply steel grade ASME SA537 Class 1, SA537 Class 2, SA537 Class 3 as well as the equivalent grades as per ASME, ASTM, JIS , …

ASME SA387 Grade 11 Class 2 (SA387GR11CL2) Pressure …

Henan HZZ offers a large selection of high quality ASME SA387 grade 11 class 2 (SA387GR11CL2) pressure vessel and boiler steel plate with HIC. Having been focused on various steel products for over 20 years, we now brings customers quality products with high precision and high strength. Fast delivery and good after-sales service are also available.

A537 CL2 steel plate - BEBON INTERNATIONAL

ASTM A537 CL2 steel plate/sheet,ASTM A537 CL2 steel plate/sheet, under ASTM standard, we can regard A537 CL2 steel plate/sheet for simple pressure vessels steel.. A 537 Class 2 carbon steel plates are engineered to be used in pressure vessel applications.ASTM A537 Class 2 steel is a higher yield and tensile strength material used in the fabrication of pressurised vessels and steel boilers. the ...

Steel Plates| Plate Steel| Steel| Metal Plate| Plate ...

THE FOLLOWING GRADES WE SERVE IN PRESSURE VESSEL STEEL PLATES. ASTM A285 | ASME SA285 | ASTM A516 | ASME SA516 | ASTM A537 | ASME SA537 EN 10028 | BS 1501 | DIN 17155 | Boiler Quality Carbon Steel Plates. Steber Steel’s range of high quality boiler steel plate can be found in numerous worldwide industries.

A537 Class 1 Steel Plate Suppliers|ASTM A 537 Cl.1 Plates

A537 Class 1 Steel Plate have excellent quality to fully satisfy customer’s requirements. ... What is A537 Class 1 Steel Plate ? ASME SA537 Class 1 carbon steel plates are produced for use in pressurised service and are commonly used in the fabrication of industrial pressurised vessels and boilers.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.