Tel: +86-371-86151827

different plates yield strength

Steel grade:different plates yield strength

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

different plates yield strength Introduction

How to Calculate the Strength of a Steel Plate | Career Trend

How to Calculate the Strength of a Steel Plate. Record the load in pounds that was applied when the plate fractured. As an example, the load was 5,000 lbs. Divide the load at fracture by the area of the steel plate to determine the ultimate tensile strength. In the example, dividing 5,000 lbs. by 30 square inches equals an ultimate tensile strength of approximately 166.67 lbs. per square inch.

Yield Strength - Strength ( Mechanics ) of Materials ...

The stress value, in pounds per square inch, is the yield strength. It is indicated in Figure 5 as Point 3. This method of plotting is done for the purpose of subtracting the elastic strain from the total strain, leaving the predetermined "permanent offset" as a remainder.

Steel Plate Grades - Continental Steel & Tube Company

AR360 STEEL is a medium strength and hardness; quenched and tempered plate, of modest price, and excellent wear properties. AR400 STEEL is a high hardness, high strength quenched and tempered chrome-moly, boron treated alloy plate with good resistance to …

what is yield strength of fe360 - MS Plates - napmr.org

what is yield strength of fe360, steel,Hot sell what is yield strength of fe360, MS Plates stock in China,China what is yield strength of fe360, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled what is yield strength of fe360, MS Plates in stock each month. We can meet our customer's any quantity request.

What is the effect of yield strength in steel plates of ...

Plate with a higher yield strength, closer to tensile strength may break or fracture during straightening. Same logic may apply if plates are subjected to forceful vibrations, or periodic abrupt loading and deloading such as those used to cover defects in roads until those are repaired.[PDF]

Strength of Perforated Metal - Ferguson Perforating

equivalent strength of the perforated material is used in place of the strength of the solid material. By evaluating the effect of the perfo-rations on the yield strength of the material, the equivalent yield strength of the perforated material, S*, can be obtained as a func-tion of the yield strength of the solid or unperforated material, S.

ASTM A36 Steel Plate - Completely Specifications You ...

What Is ASTM A36

Welding metals of dissimilar strengths - The FABRICATOR

thefabricator› Article› Arc WeldingIn this situation, the chrome-moly may have a yield strength around 60 KSI and a tensile strength of 80 KSI; the A36 steel has a 36-KSI yield strength. Not only do you need to select a filler metal that matches the lower-strength material, but you also may need to find a filler metal capable of being stress-relieved.[PDF]

Steel Plate & Sheet - Alro Steel

Type of Steel Alloy Alloy Alloy Alloy Requirements for Delivery A6 A6 A6 A6 Tensile Strength (ksi) 110/130 110/130 110/130 100/130 Yield Strength (Min. ksi) 100 100 100 90 Spec. *This grade of steel may be susceptible to cracking in the heat-affected zone of …

Mild steel plates, Rolled plate, Steel plate thickness ...

Range of M.S.Plates in Stock with Mehta Steels are: 1) Plates above 40 mm will be flame cut. For 8 mm order acceptable in minimum width of 1500 mm. 2) For normalised plates minimum length to be 6300 mm. 3) Plates can be supplied with random ultrasonic testing (offline) up to maximum 50 mm thickness.

Abrasion Resisting Plate - Tell Steel Inc.

Given the high strength of the plate forming is possible but difficult. It has a tensile strength of 225,000psi, yield strength of 200,000psi and 12% elongation in 2”. AR-500 alloy steel will reduce material handling costs to a minimum for earth moving, mining and other similar industries in which a combination of toughness and abrasion ...

What is the tensile strength of mild steel? - Quora

The maximum amount of stress a material can withstand while being stretched or pulled without breaking is referred to as tensile strength.Mild steel contains smaller amount of hardening alloy carbon than other carbon steels & is ductile in nature.. The Ultimate Tensile Strength of mild steel bar or threaded bar is 841 MPa & Yield Stress is 247 MPa and. It is a low carbon (0.050.025% carbon ...What is the ultimate tensile strength and yield strength ...Feb 18, 2019What is the yield stress for steel?Jan 08, 2019What is the compressive strength of steel?Jun 27, 2017What is ultimate tensile strength?Jan 19, 2016See more results

ASTM A36 Steel Plate - Completely Specifications You ...

Yield Strength and Tensile Strength Its mechanical properties include tensile Strength ksi of 58-80 (400-550 Mpa) and minimum Yield strength 36 ksi (250 Mpa) . Elongation in 8 in min 20%, in 2 inch min 23% for steel plates and bars.

Abrasion Resisting Plate - Tell Steel Inc.

ABRASION RESISTING PLATE ( AR, AR-400, AR-500) This steel offers excellent wear and impact durability. It has yield strength of 155,000psi, a Tensile strength of 180,000psi, and 14% elongation in 2”. AR400 is typically used where high wear resistance in needed as in digger blades and buckets, mining machinery, and heavy machinery.[PDF]

CHAPTER 1 PROPERTIES OF STRUCTURAL STEELS AND …

This steel provides a minimum yield point of 36 ksi in all structural shapes and in plates up to 8 in thick. In structural steel framing for building construction, A36 steel has been largely replaced by the higher-strength A992 steel (Art. 1.1.2).

Metal Properties Comparison Chart - nvmetalworks

Metal Properties Comparison Chart. Aluminum. General Material Strengths Tensile Strength PSI (ultimate break strength) Yield Strength PSI (begins to stretch/break) Weldable Bendable/radius: Common Uses: Aluminum Sheet 3003 22,000 21,000 yes yes Tread Plate, Bright, Polishable:

NK A yield strength - MS Plates - napmr.org

NK A yield strength, steel,Hot sell NK A yield strength, MS Plates stock in China,China NK A yield strength, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled NK A yield strength, MS Plates in stock each month. We can meet our customer's any quantity request.

Trabecular Plates and Rods Determine Elastic Modulus and ...

ncbi.nlm.nih.gov› Journal List› HHS Author ManuscriptsTherefore, our results suggest that trabecular plates and rods adequately determine elastic modulus and yield strength of human trabecular bone. In addition, these PR μFE models provided 83-fold reduction in model size and 324-fold reduction in nonlinear FEA computational time to determine yield strength …

Material Properties of S355 Steel - An Overview - meadinfo.org

355 - stands for minimum yield strength (though it will vary based on thickness, refer below section for more details) Normally S355 will have following variation based on impact strength at different temperatures, as steel become more brittle when temperature drops.

Tensile and Yield Strength - Clifton Steel

Knowing both the yield and tensile strength is important because they both have an impact on the production and use of steel (and many other materials, but we will focus on the steel). The biggest difference between yield and tensile strength is that tensile is catastrophic, where yield is only a permanent deformation.[PDF]

THE MECHANICAL PROPERTIES OF STAINLESS STEEL

The Yield Strength for Stainless Steels is therefore reported as 0,2% Proof Stress (Rp 0,2), Proof Stress (0,2% offset), Proof Stress (0,2% strain), Yield Strength (offset 0,2%), 0,2% Yield Strength, etc. All these different terms may be taken to be equivalent.

Yield (engineering) - Wikipedia

Definition. The value for this is commonly set at 0.1 or 0.2% plastic strain. The offset value is given as a subscript, e.g., R p0.2 =310 MPa. High strength steel and aluminum alloys do not exhibit a yield point, so this offset yield point is used on these materials.Definition·

High Strength Low Alloy Steel Plate - INFRA-METALS

This application covers carbon steel plates of low and intermediate-tensile strength and is intended for fusion-welded pressure vessels. The plates are available in three grades having different strength levels. ASTM – A515 – Standard specification for pressure vessel plates, carbon steel, for intermediate-and-higher-temperature service.

FAQ's: Steel Grades- Type of Steel- Steel supplier ...

The main elements used in the chemical composition are Carbon, Manganese, Phosphorus, Sulfur, Silicon, Copper, Nickel, Chromium, Niobium, Molybdenum and Vanadium. The mechanical properties require a minimum 50,000, psi yield strength as well as a minimum tensile strength of 70,000 psi.

Steel material properties - Steelconstruction.info

Designers should note that yield strength reduces with increasing plate or section thickness (thinner material is worked more than thick material and working increases the strength). For the two most common grades of steel used in UK, the specified minimum yield strengths and the minimum tensile strength are shown in table below for steels to ...[PDF]

High-Strength Low-Alloy Steels - ASM International

HSLA steels covered in ASTM specifications. Applications of HSLA steels include oil and gas pipelines, heavy-duty. highway and off-road vehicles, construction and farm machinery, indus-. trial equipment, storage tanks, mine and railroad cars, barges and dredges, snowmobiles, lawn mowers, and passenger car components.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.