Tel: +86-371-86151827

astm a662 grade a steel plate application

Steel grade:astm a662 grade a steel plate application

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a662 grade a steel plate application Introduction

Standard Specification for Pressure Vessel Plates, Carbon ...

ASTM A662 / A662M-17, Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service, ASTM International, West Conshohocken, PA, 2017, astm.org. Back to Top

ASTM A662 Carbon Boiler Plate Grade A/B/C Exporter - …

ASTM A662 steel plate is classified as carbon steel plate for its low alloy content, this specification covers three grades, Grades A, B, and C, it is a kind of carbon-manganese-silicon steel plate designed for welded pressure vessels equipments

ASTM A662 Grade A steel plates/sheets - SA204steel

A662 Grade A application: A662 Grade A is a kind of Carbon Mn steel plates material used to fabric middle or low temperature pressure vessels.Obviously,ASTM A662 is divided into three grades or levels :A662 Gr. A, A662 Gr. B, A662 Gr.C.A662 Grade A i

ASTM A622 Grade A (A622GRA) Pressure Vessel and Boiler ...

ASTM A622 Grade A (A622GRA) Pressure Vessel and Boiler Steel Plate with UT. ASTM A662 Grade A(A662GR A) Pressure Vessel And Boiler Steel Plate Main Application: ASTM A662 Grade A(A662GR A) Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project.

A662 Grade A compatibility - MS Plates - napmr.org

A662 Grade A compatibility, steel,Hot sell A662 Grade A compatibility, MS Plates stock in China,China A662 Grade A compatibility, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled A662 Grade A compatibility, MS Plates in stock each month. We …

ASTM A-662/A-662M,ASTM A-662/A-662M steel plates for ...

ASTM A-662/A-662M Specification: A662 is a kind of Carbon Mn steel plates material used to fabric middle or low temperature pressure vessels. Obviously, A662 is divided into three grades or levels :A662 …

ASTM A662/A662M - steel-plate-sheets

astm a662/a662m Main Application: Pressure Vessel And Boiler Steel Plate is Widely Used In The Fabrication Of Boilers And Pressure Vessel,Such As Petroleum, …

ASTM A662 Grade B| A662 Gr.B STEEL PLATE__Steel Supplier

ASTM A662 standard specification for pressure vessel plates, carbon-manganese-silicon steel, for moderate and lower temperature service. ASTM A662 plates over 40mm in thickness shall be normalized. Plates of Grades B and C, 40 mm and under in …

ASTM A662 Grade A steel plates/sheets - SA204steel

A662 Grade A application: A662 Grade A is a kind of Carbon Mn steel plates material used to fabric middle or low temperature pressure vessels.Obviously,ASTM A662 is divided into three grades or levels :A662 Gr. A, A662 Gr. B, A662 Gr.C.A662 Grade A i

ASTM A662/A662M - steel-plate-sheets

astm a662/a662m Main Application: Pressure Vessel And Boiler Steel Plate is Widely Used In The Fabrication Of Boilers And Pressure Vessel,Such As Petroleum, …

Hot Rolled Boiler Steel Plate ASTM A662 Gr C - …

Hot Rolled Boiler Steel Plate ASTM A662 Gr C. Steel Grade: Grade A, Grade B, Grade C Product Scope: ASTM A662 specification covers three grades, Grades A, B, and C, it is a kind of carbon-manganese-silicon steel plates intended primarily for service in welded pressure vessels where improved low temperature notch toughness is important.

Application of ASTM A633 Grade E steel plates steel plate ...

ASTM A633 Grade E steel plates belong to normalized high strength low alloy structural steel for welded, riveted, or bolted construction. A633 Grade E steel plates are mainly used in oil, chemical, power station, boiler and other industries, for the production of reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell ...

A662 Grade C material application-BBN STEEL sale steel ...

ASTM A662 Grade A steel plates/sheets - SA204steel. A662 Grade A application: A662 Grade A is a kind of Carbon Mn steel plates material used to fabric middle or low temperature pressure vessels.Obviously,ASTM A662 is divided into three grades or levels :A662 Gr. A, A662 Gr. B, A662 Gr.C.A662 Grade A i

ASTM A662 Grade C| A662 Gr.C STEEL PLATE__Steel Supplier

ASTM A662 standard specification for pressure vessel plates, carbon-manganese-silicon steel, for moderate and lower temperature service. ASTM A662 plates over 40mm in thickness shall be normalized. Plates of Grades B and C, 40 mm and under in …

ASTM A-662/A-662M,ASTM A-662/A-662M steel plates …

ASTM A-662/A-662M Specification: A662 is a kind of Carbon Mn steel plates material used to fabric middle or low temperature pressure vessels. Obviously, A662 is divided into three grades or levels :A662 …

ASTM A662 Carbon Steel, Grade C - MatWeb

Property Data; This page displays only the text of a material data sheet. To see MatWeb's complete data sheet for this material (including material property data, metal compositions, material suppliers, etc), please click the button below.

A662 Grade B pressure vessel plate specification-A537 ...

BBN STEEL supply A662 Grade B pressure vessel plate specification, BN STEEL supply ASME SA204 multifunctional pressure vessel plate stock, Pressure Vessel Steel Plate,Boiler Steel plate ... SA387 Grade 5 prime quality pressure vessel plate Specs; ASTM A204 Gr.A cheap pressure vessel plate supplier; ... A517 Gr.F hot rolled pressure vessel plate ...

top quality carbon steel metal sheet ASTM A662 Gr A

Top Quality Carbon Steel Metal Sheet Astm A662 Gr A , Find Complete Details about Top Quality Carbon Steel Metal Sheet Astm A662 Gr A,Steel Sheet Astm A662 Gr A,Carbon Steel Sheet A662 Gr A,Steel Metal Sheet Astm A662 Gr A from Steel Sheets Supplier or Manufacturer-Tianjin Tiangang Weiye Steel Tube Co., Ltd.

BBN Steel Supply astm a662 plate application,A36,A283 ...

ASTM A662 Grade A steel plates/sheets - SA204steel. ASTM A662 Grade A steel plates/sheets A662 Grade A application: A662 Grade A is a kind of Carbon Mn steel plates material used to fabric middle or low temperature pressure vessels.Obviously,ASTM A662 is divided into three grades or levels :A662 …

ASTM A203 Grade E steel plate dealer-BEBON STEEL …

Application of ASTM A203 Grade E steel plate dealer: Widely used in petroleum, chemical industry, power plants, boilers and other fields, such as to produce reactors, heat exchangers, separators, spherical tank, oil tank, LPG tanks, nuclear reactor pressure shell, boiler drum, liquefied petroleum gas cylinders, hydropower high-pressure pipes, Turbine vortex shells and other equipment and ...

Buy Steel Plate Astm A662 Grade C

Alloy Plate Astm A662 Grade C - Bebon STEEL. ASTM A662 Carbon Boiler Plate Grade A/B/C Exporter - … ASTM A662 steel plate is classified as carbon steel plate for its low alloy content, this specification covers three grades, Grades A, B, and C, it is a kind of carbon-manganese-silicon steel plate designed for welded pressure vessels equipments

ASTM A36 Steel Plate - Completely Specifications You ...

This steel plate is also known as mild steel in South East Asian Region. And below materials are listed in ASTM A36 standard specification that could be made in this kind of carbon steel material. Steel Rivets, referred ASTM A502 Grade 1 Steel nuts, ASTM A563/M Bolts, ASTM A370 Grade A or F 568M High strength bolts, ASTM A325/M Anchor bolts F1554

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.