Tel: +86-371-86151827

s235j2 steel plate specs

Steel grade:s235j2 steel plate specs

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s235j2 steel plate specs Introduction

EN 10025-2 S235J2 high strength structural steel plate ...

S235J2 is a low carbon, high tensile strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, it possesses good cold-forming properties. The plate is produced by fully killed steel process. and supplied in normalized or controlled rolling condition.

S235J2 steel plate - BEBON INTERNATIONAL

S235J2 steel plate. S235J2 steel plate is the Non-alloy structural steels. S235J2 steel’s Mechanical properties is Yield strength more than 225MPa, tensile strength 340-510MPa, Elongation is 24%. Ultrasonic Test shall be carried out according to EN10025_1.For the impacting test,it indicates by J2.St37-2 · S50c · P355gh · C45 · C60 · S355mc

Give You Our Best Carbon Steel Plate EN S235J2 steel sheet ...

S235J2 low alloy steel plate under EN 10155 standard can be offered in China ,we have S235J2 material price and specification ,if you need S235J2 steel manufacturer and suppliers ,please contact us. ...

S235j2 en10025-2 s235j2g3 grade s235j2g3 steel plate ...

This is common carbon steel plate in S235JR, S235J0 and S235J2 steel grade. Gangsteel had many stock size in carbon steel plate, in ASTM A36, S235JR, S235J0, S235J2, SS400, ST37-2 and so on. For more information of S235j2 steel, please refer them in following.

S235 Structural Steel Plate, S235JR Structural Steel Plate ...

SAILMA 250HI Structural Steel Plate, S235 Structural High Tensile Steel Plates Distributor, ISO E235B Steel Plate Stockist in Mumbai, India. S235J2 Structural Steel Sheets, S235JR Plates, IS 2062 E250 C Sheets Exporter, AFNOR E24-2 structural steel plates Dealer, SAILMA 250 Plate Supplier in India.

S235J2 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S235J2 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

S235J2 Steel Grade, Mechanical Properties, Chemical ...

S235J2 Steel Grade, Mechanical Properties, Chemical Composition, Grade Equivalent Standard: EN 10025-2:2004, European standard for hot-rolled structural steel. Part 2 - Technical delivery conditions for non-alloy structural steels.

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

s275jr specification - MS Plates

S235J2 steel plate - BEBON INTERNATIONAL, S235J2 steel plate would be used to built containers which can bear low temperature sea water. When customers order S235J2 steel platefrom us,our mill should be roll them completely according to EN10025_2 specification, the mill would issue original Mill test certificates before taking delivery for ...

EN S235J2W Specs - MS Plates - napmr.org

EN 10025 S235J2 steel plate, S235J2 steel plate, under EN10025 standard, we are S235J2 steel suppliers,if you need S235J0W,S235J2W,S355J0W,S355J2G2W,S355J2G1W,S355K2G1W,please contact us. Bebon International is a professional S235J2 steel exporter and a steel Stockist in china. ... Suppliers of SM490A steel Specs,Steel Plate stock in China .

High Strength Low EN 10025 S355J2+N Steel Plate Supplier ...

EN 10025 S355J2+N Plates Manufacturer. Marc Steel is a recognized manufacturer and trader of EN 10025 S355J2+N Plates, which is factory-made by our skillful specialists by using finest in class raw material.EN 10025 S355J2+N Plates Besides this, our experts offer this High Tensile EN 10025 S355J2+N Plates at most equitable rate.Moreover, available in a range of specifications, this High ...

Steel Grades Specifications - RFL

Grades, Properties, and Nearest Equivalents

S235j2 en10025-2 s235j2g3 grade s235j2g3 steel plate ...

This is common carbon steel plate in S235JR, S235J0 and S235J2 steel grade. Gangsteel had many stock size in carbon steel plate, in ASTM A36, S235JR, S235J0, S235J2, SS400, ST37-2 and so on. For more information of S235j2 steel, please refer them in following.

Steel Grades Specifications - RFL

EN 10025: 2004 is the new European standard for structural steel. EN 10025: 2004 is the new European standard for structural steel. former standards include EN10025: 1993. History of the Standard. The European Committee for Iron and Steel Standardisation is responsible for producing the European Standards (ENs) for structural steels.

S235J2 steel plate,S235J2 steel mechanical properties ...

S235J2 steel plate is a kind of non-alloy structural steel, it is mainly used in structural projects and tanks. S235J2 steel plate is equal to Chinese standard steel grade Q235D. More information about S235J2 steel plate technology, please see the following: 235J2 steel specification: Grade: 235J2 Standard: EN 10025-2 Number: 1.0117.

S235 Structural Steel Plate, S235JR Structural Steel Plate ...

S235J2 Structural Steel Sheets, S235JR Plates, IS 2062 E250 C Sheets Exporter, AFNOR E24-2 structural steel plates Dealer, SAILMA 250 Plate Supplier in India. Conquest Steel & Alloys has an elaborate range of S235 Structural High Tensile Steel Plates , …

S235J2 AR|S235J2+N|S 235 J2 Structural materials plate ...

S235J2+AR--A structural grade (S) with the same minimum yield strength of 235 N/mm²m, but supplied in an 'as rolled condition'. S235J2+N--A structural grade (S) with the same minimum yield strength of 235 N/mm²m, but supplied in an 'Normalized condition'.

S235J2,S235J2 STEEL,S235J2 PLATE

Low temperature impacting test shall be done for structural steel plate S235J2 under minus 20 centigrade.When rolling of steel plate S235J2,As rolled or Normalizing rolling is both ok.As rolled delivery condition without any special rolling and heat treatment condition.Normalizing rolling process in which the final deformation is carried out in a certain temperature range leading to a material ...[PDF]

EN 10025 S235J2 steel plate - steel-plate-sheet

S235J2 steel plate, EN10025 S235J2 steel plate, under EN10025 standard, we can regard S235J2 steel plate as Carbon and low alloy steel S235J2 steel plate is one mainly of Carbon and low alloy steel, S235J2 steel plate would be used to built containers which can bear low temperature sea water. When customers order S235J2 steel plate from us,our ...

Steel Grade Equivalents Table | Universal Steel America

universalsteelamerica› ResourcesCarbon steel grade equivalents table for American ASTM, ASME, and SAE to Europe, Germany, Italy, France, and Japan. If you need more information contact us today and we will be glad to help!

High Strength Low EN 10025 S355J2+N Steel Plate Supplier ...

EN 10025 S355J2+N Plates Manufacturer. Marc Steel is a recognized manufacturer and trader of EN 10025 S355J2+N Plates, which is factory-made by our skillful specialists by using finest in class raw material.EN 10025 S355J2+N Plates Besides this, our experts offer this High Tensile EN 10025 S355J2+N Plates at most equitable rate.Moreover, available in a range of specifications, this High ...

EN 10025-2 S235J2 carbon structural steel plate--Xin Steel ...

Low temperature impacting test shall be done for structural steel plate S235J2 under minus 20 centigrade.When rolling of steel plate S235J2,As rolled or Normalizing rolling is both ok.As rolled delivery condition without any special rolling and heat treatment condition.Normalizing rolling process in which the final deformation is carried out in a certain temperature range leading to a material ...

S235J2| S235J2 steel plate__Steel Supplier

Gangsteelis specialized in supplying EN10025-2 steel plate in S235J2. For more information of S235J2 steel plates, please check them in following: Chemical composition % of the Product analysis of grade S235J2 (1.0117) Nominal thickness =< 30(mm) CEV max = …

S235J2 Valve,S235J2 flanges,S235J2 Pipe Fitting,S235J2 ...

S235J2 angle bars, S235J2 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control S235J2 chemical composition and S235J2 mechanical properties.

EN S355J0 steel plate Specs - braunjp

S355 European Standard Steel S355 EN 10025 : 2004 Standard Structural Steel Plate S355 structural steel plate is a high-strength low-alloy European standard structural steel covering four of the six "Parts" within the EN 10025 – 2004 standard.

China Hot Rolled Steel Plate (S235J2 S235JR S355J2 S355JR ...

Steel Plate, S235j2 Steel Plate, S235jr Steel Plate manufacturer / supplier in China, offering Hot Rolled Steel Plate (S235J2 S235JR S355J2 S355JR), Stainless Steel Checkered Plate (304 316L 410S 420 420J1 420J2), Stainless Steel Checkered Plate Stock Price (304 SUS304 316 316L) and so on.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.