Tel: +86-371-86151827

astm a299 gr a steel plate equivalent

Steel grade:astm a299 gr a steel plate equivalent

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a299 gr a steel plate equivalent Introduction

ASTM A299 Grade A/B High Quality Carbon Steel Plate ...

Product Scope:. ASTM A299 specification covers manganese-silicon carbon steel plates for use in welded boilers and other pressure vessels. Plates under this specification are produced in two grades (A, B). Yield and tensile strength of Gr. B is higher than Gr. A. Due to high composition of C, Mn, Si.

ASTM A299 Grade B Steel plate steel plate

ASTM A299 Grade B Steel plate. ASTM A299 Grade B Steel plate is manganese-silicon carbon steel plates for use in welded boilers and other pressure vessels. A299 Grade B Steel plate for the thickness equal or belows 50 millimeter shall be supplied in the as_rolled delivery condition, except the end user indicate needing normalized or stress relieved...

ASTM A299 Carbon Steel for Pressure Vessel - steel-jw

ASTM A299 is a kind of carbon steel material, it's product type is steel plates. Based on A299 higher C, Mn, and Si composition, ASTM A299 widely used to fabric pressure vessel.There are two steel grades in the standard ASTM A299 , and they are A299 Gr.A, A299 Gr.B .

A299 GRADE A| A299 Gr.A|A299 GR A STEEL PLATE__Steel …

a299 grade a| a299 gr.a|a299 gr a steel plate A299 /A299M covers manganese, silicon carbon steel plate for used in welded boiler and others pressure vessels in steel grade A299 Grade A and A299 Grade B.

Standard Specification for Pressure Vessel Plates, Carbon ...

This specification covers manganese-silicon carbon steel plates for use in welded boilers and other pressure vessels. Plates under this specification are produced in two grades. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Tension test shall be made to conform to the requirements specified.

ASTM A299 Grade B Boiler and pressure vessel steel plate ...

ASTM A299 Grade B Boiler and pressure vessel steel plate Equivalent Material ASTM A299 Grade B Boiler and pressure vessel steel plate in 50 mm and below in thickness are normally supplied in …

ASTM A299 Carbon Steel for Pressure Vessel Plates,ASTM ...

ASTM A299 Carbon Steel for Pressure Vessel Plates. ASTM A299 is a kind of carbon steel material, it's product type is steel plates. Based on A299 higher C, Mn, and Si composition, ASTM A299 widely used to fabric pressure vessel.There are two steel grades in the standard ASTM A299 , and they are A299 Gr.A, A299 Gr.B .

SA299 Grade A SA299 Grade B A299 Grade A/B steel plate ...

Carbon steel with Manganese-Silicon plate SA299 Grade A,SA299 Grade B under steel specification standard ASME SA 299/SA 299M.There are other two steel grades A299 Grade A and A299 Grade B owned the similar steel properity which is according to ASTM A 299/A 299M.As for the heat treatment, steel plate A299 Grade A and A299 Grade B equal and under 50 ...

Products / Boiler Steel Plate / ASTM A299 Steel Plate ...

A299 GRADE A| A299 Gr.A|A299 GR A STEEL P Inventory: Gangsteel is specialized in supplying ASTM steel plate in A299 Grade A in high quality.

A299 Chemical composition,A299 Mechanical ... - steel plates

A299 Chemical composition,A299 Mechanical properties. A 299 steel is an important grade under ASTM standard, one class of boiler and pressure vessels. Refer to A299 Chemical composition,A299 Mechanical properties, A299 is suggested that all the plates to be done ultrasonic test and PWHT for improving steel properity and safety when using in high...

304/304L|316/316L - ASTM A240 Stainless Steel Plate ...

ASTM A240 Equivalent Steel Grade: We also offer steel fabrication service where steel plates can go through processings like cutting (any size and any shape), drilling, welding, milling, machining as you require. Our steel mills have fabricating employees that have 5-10 years of working experience.

A299 Grade A equivalent - MS Plates - napmr.org

ASTM A299 Grade A steel plate equivalent-BEBON STEEL . Search for Steel Grade Equivalent. Look Up Quick Answers Now!Search for Steel Grade Astm. Look Up Quick Answers Now!This Is The Place To Find The Best Answers For Astm Grade A Steel!astm a299 - download ASTM standards buy online $40Get the Price of Top 10 ASTM A672 Carbon Steel EFW Pipe ...

A299 Grade A equivalent - MS Plates - napmr.org

ASTM A299 Grade A steel plate equivalent-BEBON STEEL . Search for Steel Grade Equivalent. Look Up Quick Answers Now!Search for Steel Grade Astm. Look Up Quick Answers Now!This Is The Place To Find The Best Answers For Astm Grade A Steel!astm a299 - download ASTM standards buy online $40Get the Price of Top 10 ASTM A672 Carbon Steel EFW Pipe ...

ASTM A299 Grade B(A299GRB) Pressure Vessel And Boiler ...

ASTM A299 Grade B(A299GRB) Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project. Steel Name: ASTM A299 Grade B(A299GRB) Boiler steel plate,ASTM A299 Grade B(A299GRB) Pressure Vessel Steel plate ,ASTM A299 Grade B(A299GRB) Storage Tanks Steel plate.

ASTM A299 Grade B Boiler and pressure vessel steel plate ...

ASTM A299 Grade B Boiler and pressure vessel steel plate in 50 mm and below in thickness are normally supplied in the as-rolled state. Plates may be ordered normalized or stress relieved, or both. Plates over 50 mm in thickness shall be normalized.A299 / A299M Covers manganese, silicon carbon steel plates for welding boilers and other pressure vessels, steel grade A299 Class A and A299 …

A299 Chemical composition,A299 Mechanical ... - steel plates

A 299 steel is an important grade under ASTM standard, one class of boiler and pressure vessels.Refer to A299 Chemical composition,A299 Mechanical properties, A299 is suggested that all the plates to be done ultrasonic test and PWHT for improving steel properity and safety when using in high pressure situiations in yard.

ASTM A299 Carbon Steel for Pressure Vessel Plates,ASTM ...

ASTM A299 is a kind of carbon steel material, it's product type is steel plates. Based on A299 higher C, Mn, and Si composition, ASTM A299 widely used to fabric …

A299 Grade Steel plate,A299 Grade Steel pipe - Steel ...

Under specification ASTM ,there are two pressure vessel steel plate A299 Grade A and A299 Grade B. A299/A299M ,and the equal steel grades S A299 Grade A and s A299 Grade B accoring to standard ASME SA299/SA299M .This standard covers manganese silicon carbon steel plates A299GrA and A299 Grade B which are mainly used in welded boilers and other pressure vessels and tanks.

Equivalents of Carbon Steel Qualities - MESTEEL.COM

It Provides Steel And Construction Related Companies In The Middle East Information, News And An Extensive Interactive Database, Inclusive Offers And Inquiries. ... Equivalents of Carbon Steel Qualities. Boiler steel Fine-grain structural steels, normalised rolled Fine-grain structural steels, thermomechanically rolled

Mild Steel Plates| Carbon Steel Plates ASTM A36| Mild ...

IS 2062 Grade B Carbon Steel Plates | ASTM A36 Carbon Steel Plates Manufacturer and Exporter’s of IS 2062 Grade B Carbon Steel Plates and ASTM A36 Carbon Steel Plates in India Importer, Stockholder, Suppliers and Exporter of IS 2062 Grade B Carbon Steel Plates and ASTM A36 Carbon Steel Plates in India. Carbon Steel and Mild Steel Plates

ASTM A285 and ASTM A283 steel plate comparsion - AGICO

With 3 steel grades (Grade A, Grade B, Grade C) covering tensile strength range from 310-515Mpa,usually ASTM A285 steel plate is delivered as-rolled condition. made by killed, semi-killed, capped or rimmed steel practices according to the end users’ requirement.

What is an ASTM A36 Steel equivalent? - Quora

Ask New Question. , 8 years as astm steel standard product editor. A36 steel plate is similar to Q235B steel plate, it is one Q235b equivalent steel standard, another one is SS400. while there are still differences, you can get more detail info from here Q235b steel equivalent standard ASTM A36.

A299 GRADE A| A299 Gr.A|A299 GR A STEEL PLATE

A299 /A299M covers manganese, silicon carbon steel plate for used in welded boiler and others pressure vessels in steel grade A299 Grade A and A299 Grade B. ASTM A299 plates in 50 mm and under in thickness are normally supplied in the as-rolled condition.

China ASTM A299 Gr.A material mill-BBN STEEL Pressure ...

A 299 and A 299M covers manganese, silicon carbon steel plate for used in welded boiler and others pressure vessels in steel grade A299 Grade A and A299 Grade B. 1. Steel Grade: A 299 Grade A, A 299 Grade B, A299 Grade A and A299 Grade B, steel plate, 2. Supply steel …

ASME SA516 / ASTM A516 - Gr. 70 - Brown McFarlane

ASME SA516 Grade 70 and ASTM A516 Grade 70 benefits: Plates to this specification held in stock at our stockholding and processing facilities in Stoke-on-Trent. We're fully accredited quality systems to ISO 9001, 14001 and 18001. Delivered worldwide by our international logistics organisation.

A299 Grade B Carbon Equivalent - MS Plates - napmr.org

Dec 15, 2015· (Gr) B pressure vessel steel plate abs dh36 steel specification,dh36 steel plate equivalent,dh36 vs ah36,abs grade a A299 /A299M covers manganese, silicon carbon steel plate for used in welded boiler and others pressure vessels in steel grade A299 Grade A and A299 Grade B.c 40 material equivalent; Pressure Vessel Steel.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.