Tel: +86-371-86151827

sa516 gr 70 steel sheet

Steel grade:sa516 gr 70 steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sa516 gr 70 steel sheet Introduction

Asme sa516 grade 70|sa516 grade 60 steel plate specification

Delivery State: SA516-70n reffers to normalized steel plate product, for steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil. Plates with thickness above 40mm are supplied normalized. SA516 grade 70 steel plate density is 0.284 cu/in3 (7861 kg/m3).. Mild test: ASME SA 516-carbon steel plates are manufactured with mill certification following EN10204 3.1 or ...

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA516 steel plate, also known as PVQ516 steel plate, is carbon steel with specifications for pressure vessel plates and moderate or lower temperature service. A516 steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important.

sa516 Gr 70 | hic steel plate|SA 516 Gr.70 Nace Plate|SA ...

Triton Alloys Inc. is a sa516 Gr 70 steel plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies sa516 Gr 70 steel plate to internationally approved quality standards for applications. sa516 Gr 70 steel plate have excellent quality to fully satisfy customer’s requirements.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

ASME SA516,SA516 Steel - JOIN WIN STEEL

SA516 is a kind of Carbon steel plates material used to fabric middle or low temperature pressure vessels. Obviously, SA662 is divided into four grades or levels :SA516 Gr. 55 (380), SA516 Gr. 60 (415), SA516 Gr. 65 (450) , SA516 Gr.70 (485). In the ASME SA-516/SA-516M standard, this material request for Impact test energy.

ASTM A516/ ASME SA516 PVQ Steel Plate | BBN Steel

SA516 is a carbon steel plate grade utilized primarily in welded pressure vessels for moderate to lower temperature service. This material is produced in grades 55, 60, 65 and 70. This material is also offered in the normalized condition where improved notch toughness is required.

CASIDER SA | Steel sheets A/SA 516 Gr.70+N

The fine grained structural steel in this series can be perfectly welded, both manually and using automatic equipment, by means of all known welding processes. To give the structure of the product greater homogeneity, A/SA 516 Gr.70+N steel can also be supplied vacuum degassed.

ASTM A516 Carbon Steel, Grade 70 - MatWeb

ASTM A516 Carbon Steel, Grade 70 Categories: Metal; Ferrous Metal; Alloy Steel; Low Alloy Steel; ASTM Steel; Carbon Steel; Low Carbon Steel. Material Notes: Carbon steel plate for moderate and lower temperature service. Pressure vessel quality: Key Words: SA516, ASTM A285: Vendors: No vendors are listed for this material.

Carbon Steel A516 Gr.60/65/70 Sheet, Plate and Structurals

Alpha Overseas is one of the Leading Supplier & Exporter of Carbon Steel ASTM A516 Sheet, Plate and Structurals in India. We Keep Bulk Stock of Grade 60, 65 and 70 Carbon Steel or Mild Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) for quick delivery to Our Clients.

ASTM SA516 GR70 Steel plate ASTM SA516 GR70 Steel sheet

A516Gr70 steel plate. ... ASTM A516 Gr 70 steel plate/sheet,ASTM A516 Gr 70 steel plate/sheet, under ASTM standard, we can regard A516 Gr 70 steel plate/sheet for simple pressure vessels steel. ASTM A516 Gr 70 /ASME SA516 Gr 70 is an excellent choice for service in lower than ambient temperature applications, ...

ASME SA516,SA516 Steel - JOIN WIN STEEL

SA516 is a kind of Carbon steel plates material used to fabric middle or low temperature pressure vessels. Obviously, SA662 is divided into four grades or levels :SA516 Gr. 55 (380), SA516 Gr. 60 (415), SA516 Gr. 65 (450) , SA516 Gr.70 (485). In the ASME SA-516/SA-516M standard, this material request for Impact test energy.

SA516 GR 70 Carbon steel plate - hopkinsplasticsurgery

SA516 Gr 70 Carbon Steel Boiler Plate Suppliers and … Champak steel is a exporters and Stockholders of ASME SA 516 Gr 70 Plates, SA516 Gr.70 Carbon Steel Plate, ASTM A516 Grade 70 pressure vessels Plates, A516 Gr.70 Boiler Steel Plate, A516 Grade 70 Welded Steel Plates

ASTM SA285 GRC SA516 GR70 Steel plate /ASTM SA516 …

ASTM SA285 GRC SA516 GR70 Steel plate /ASTM SA516 GR70 Steel sheet, US $ 1 - 10 / Piece, AISI, ASTM, BS, DIN, GB, JIS, SUS,ASME,ANSI, mild steel,carbon steel, Tianjin ...

SA516Gr70|ASME SA516 Grade 70|SA516 Gr.70 STEEL …

sa516gr70|asme sa516 grade 70|sa516 gr.70 steel plate ASME SA516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. ASME SA516 plates 40mm and under in thickness is normally supplied in the as-rolled condition.

A515 Gr70 steel - pressure-vessel-steel

A515 Gr70 Steel Plate, A515 Gr70 Steel price-Seed steel. A515 Gr 70 Steel is is a high-temperature welding boilers and other pressure vessels with carbon silicon steel plate,seed steel can provide the specification that ... ASME SA516 / ASTM A516 - Gr. 70 - Brown McFarlane

ASTM A516 Grade 70 Carbon Steel Plates ... - ganpatind

Stockist and Supplier of ASTM A516 Grade 70 Carbon Steel Sheets, ASTM A516 Grade 70 Carbon Steel Circle, ASTM A516 Grade 70 Shim Sheet, Huge stock of standard ASTM A516 Grade 70 Polished Plate is in ready stock

A516Gr70 steel plate - BEBON INTERNATIONAL

ASTM A516 Gr 70 steel plate/sheet,ASTM A516 Gr 70 steel plate/sheet, under ASTM standard, we can regard A516 Gr 70 steel plate/sheet for simple pressure vessels steel.. ASTM A516 Gr 70 /ASME SA516 Gr 70 is an excellent choice for service in lower than ambient temperature applications, has excellent notch toughness and is used in both pressure vessels and industrial boilers.ASTM A516 Gr 70 ...

Sa516 Grade 70 Steel, Sa516 Grade 70 Steel Suppliers and ...

Alibaba offers 347 sa516 grade 70 steel products. About 91% of these are steel sheets. A wide variety of sa516 grade 70 steel options are available to you, such as en, din, and aisi.

ASME SA516 / ASTM A516 - Gr. 70 - Brown McFarlane

About ASME SA516 Grade 70 and ASTM A516 Grade 70. We hold large stocks of plates certified to ASTM A516 Gr. 70 and ASME SA516 Gr. 70 in our warehouse facilities in the U.K. A range of specially manufactured hydrogen induced crack resistant steel in SA / A516 Gr. 70 HIC is also available from stock. These are steel specifications that are at the ...

sa516 Gr 60 | hic steel plate|SA 516 Gr.60 Nace Plate

Triton Alloys Inc. is a sa516 Gr 60 steel plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies sa516 Gr 60 steel plate to internationally approved quality standards for applications. sa516 Gr 60 steel plate have excellent quality to fully satisfy customer’s requirements.

CASIDER SA | Steel sheets A/SA 516 Gr.70+N

The fine grained structural steel in this series can be perfectly welded, both manually and using automatic equipment, by means of all known welding processes. To give the structure of the product greater homogeneity, A/SA 516 Gr.70+N steel can also be supplied vacuum degassed.

4140 Plate | A516 Gr 70 Steel | Delaware Valley Steel Products

Recognizing customer needs and market trends, Delaware Valley Steel offers a wide variety of products. We work to meet the many different requirements the industry presents, from 4140 plates to A516 Gr 70 steel.

ASME SA516 Grade 70|SA516 Grade 60 Steel Plate Specification

Test&Inspection for ASME A516 Steel Plate. Delivery State: SA516-70n reffers to normalized steel plate product, for steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil. Plates with thickness above 40mm are supplied normalized. SA516 grade 70 steel plate density is 0.284 cu/in3 (7861 kg/m3). Mild test:

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.