Tel: +86-371-86151827

une f111 steel sheet

Steel grade:une f111 steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

une f111 steel sheet Introduction

[PDF]

material Grade Comparison Table - mdmetric

MARYLAND METRICS Technical Data Chart A short general listing of popular materials International Material Grade Comparison Table The standards that correspond with DIN Material Numbers can only be compared approximately. The use of these equivalents has to be evaluated on a case-by-case basis.

Comparison of Carbon & Alloy Steel Standards - West ...

Our steel is supplied in accordance with our ISO 9001:2008 registration. West Yorkshire Steel aim to satisfy the quality and delivery needs of our customers and we measure our performance by meeting customers’ requirements and work to continually improve the service that we provide.

EN10111 DD11 steel plate,EN10111 DD11 steel plate steel ...

EN10111 DD11 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's tensile strength is around 440 MPa (there is different min strength point at the different thickness.) DD11 yield strength is from 170MPa to 340 MPa.

F1140 (UNE ) - Worldwide equivalent grades - Steel Number

Post free buying requirement for product F1140 (UNE ) Chemical composition and properties of european equivalents (EN) for F1140 (Spain, UNE ): C45E (1.1191) , F1140 (Spain, UNE ) - European (EU, EN) and wordwide Steel equivalent grades These comparison table is only intended as an indication of the closest khown equivalent grades.

Steel standards - equivalence - MP Métal

Equivalence of standards - Coated cold rolled sheet products - European standard designations: Equivalent qualities according to former national standards[PDF]

Carbon Steel Comparison Tabel - Norsk Stål

Germany France Italy Belgium Sweden U.K. Canada India International USA EN 10025-2 (2004) EN 10025 (1993) EN 10025 (1990) DIN 17100 NF A 35-501 …

ASTM A213 T11 Alloy Steel, Chromium Molybdenum, F11-1

Property Data; This page displays only the text of a material data sheet. To see MatWeb's complete data sheet for this material (including material property data, metal compositions, material suppliers, etc), please click the button below.[PDF]

ISO - Stellenbosch University

ISO Coromant Material Classifi-cation (CMC) Country Great Britain Sweden USA Germany France Italy Spain Japan Standard P Steel BS EN SS AISI/SAE W.-nr. DIN AFNOR UNI UNE JIS 02.1/02.2 816M40 110 - 9840 1.6511 36CrNiMo4 40NCD3 38NiCrMo4(KB) 35NiCrMo4 - 02.1/02.2 817M40 24 2541 4340 1.6582 35CrNiMo6 35NCD6 35NiCrMo6(KB) - -[PDF]

Equivalent Grades ALLOY STEEL - 2.imimg

Equivalent Grades ALLOY STEEL Equivalent Grades Internal Standard BS DIN IS EN SAE/AISI EN18 530A40 37Cr4 40Cr1 EN18 5140 EN24 817M40 34CrNiMo6 40NiCr4Mo3 EN24 4340 EN19C 709M40 - 40Cr4Mo3 EN19C 4140,4142 EN19 709M40 42Cr4Mo2 40Cr4Mo3 EN19 4140,4142 EN18D 530A40 37Cr4 40Cr1 EN18D 5140

F1140 (UNE ) - Worldwide equivalent grades - Steel Number

Post free buying requirement for product F1140 (UNE ) Chemical composition and properties of european equivalents (EN) for F1140 (Spain, UNE ): C45E (1.1191) , F1140 (Spain, UNE ) - European (EU, EN) and wordwide Steel equivalent grades These comparison table is only intended as an indication of the closest khown equivalent grades.

F.114 Spain Structural steel - equivalent grades

Database of Steel and Alloy (Marochnik) Home Steel and Alloy Search ... Standard - UNE : Grade - F.114 45 ( 45 ) - High quality structural carbon steel 45 ( 45 ), 45 ( 45 ) - All Equivalent Grades ... Sheets and Strips: B34 - Ribbons: В62 - Steel pipes and connecting parts to them: В71 - Low-carbon steel wire:

Steel standards - equivalence - MP Métal

Equivalence of standards - Coated cold rolled sheet products - European standard designations: Equivalent qualities according to former national standards

UNE Grade F.114 - Steel - Matmatch

See the chemical composition and physical properties of UNE Grade F.114, find alternative materials, and connect with suppliers. ... (sheet) bar, sheet. AIR 9160 Grade 9160C231 solution treated and tempered bar. Suggested reading. Carbon Steel: Properties, Production, Examples and Applications Comparing Hardness Tests: Vickers, Rockwell ...

st523 vs en - KATALOR STEEL

About 82% of these are steel pipes, 5% are steel sheets, and 1% are steel round bars. A wide variety of st52 ... The comparisons between St37-2 and St52-3 steel … When compared with St52-3 steel, St37-2 has a comparatively higher chemical content in sulphur, phosphorus and nitrogen . As a result, St52-3 steel pipes have a ...

UNE Grade F.521 - Steel - Matmatch

UNE Grade F.521. Equivalent standard names. GOST 5950 Grade Kh12 BDS 7938 Grade Ch12 More. ... (sheet) bar, sheet. AIR 9160 Grade 9160C231 solution treated and tempered bar. Suggested reading. Carbon Steel: Properties, Production, Examples and Applications Comparing Hardness Tests: Vickers, Rockwell, Brinell, Mohs, ...

HongYue Stainless Steel-Manufacturer and Supplier of ...

HongYue Stainless Steel is a ISO 9001 certified Stainless steel tube Manufacturer of Stainless steel tube products based in Foshan-Guangdong where is known as a Town of Stainless steel, provide stainless steel coil/sheet, pipe/tubing, bar/wire. The company was initially established in 1994, began with individual workshop for the sheet metal.[PDF]

Mechanical Properties of Steel - pivotpins

GENERAL INFORMATION Mechanical Properties of Steel - Condition, Strength, Hardness, Machinability Stainless Steels. AISI. Type 302 HQ Type 303. Type 304 Type 316. Type 410 Type 416. Type 17-4 Materials. Condition

Spain UNE 80CrV2 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 80CrV2 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

Mencinger's Web

Standards/Comparison; Steel for Offshore structures : Grade 355 / API 2H and 2W - Chemical Compositions Grade 355 N - Comparison of Tensile Strength, Yield Strength and Toughness

Spain / UNE, Middle carbon steels, low alloyed :: Total ...

The Total Materia database includes more than 450,000 grades from all over the world. Their chemical compositions, mechanical and physical properties, cross-references, and more are only a click away. Finding a grade in the database is very easy and takes seconds. For example, let’s look into the properties of steel grade X5CrNiMo 17 12 2 according to DIN.[PDF]

Equivalent Grades ALLOY STEEL - 4.imimg

Equivalent Grades ALLOY STEEL Equivalent Grades Internal Standard BS DIN IS EN SAE/AISI EN18 530A40 37Cr4 40Cr1 EN18 5140 EN24 817M40 34CrNiMo6 40NiCr4Mo3 EN24 4340 EN19C 709M40 - 40Cr4Mo3 EN19C 4140,4142 EN19 709M40 42Cr4Mo2 40Cr4Mo3 EN19 4140,4142 EN18D 530A40 37Cr4 40Cr1 EN18D 5140

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.

ap11 une36 093 - MS Plates - napmr.org

UNE 36.093 AP 11 steel plate/sheet, under UNE 36.093 standard, we can regard AP 11 steel plate/sheet as stamping and cold forming steels. AP 11 steel is mainly used as stamping and cold forming steels. UNE 36.093 AP 11 steel plate/sheet is stamping and cold forming steels, it is suitable for non-structural presswork and forming.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.