Tel: +86-371-86151827

304 stainless steel plate sheet with 2b surface finish

Steel grade:304 stainless steel plate sheet with 2b surface finish

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

304 stainless steel plate sheet with 2b surface finish Introduction

304 Stainless Steel 2B Finish | Stainless Supply

304 stainless steel 2B finish is a mill finish, which is smooth and NOT the brushed finish commonly seen on kitchen appliances. 304 stainless steel 2B finish is light gray in color. 304 stainless steel 2B finish may or may not have a protective film on one side to prevent scratching.[PDF]

Guide to Stainless Steel Finishes

Mill Finishes GUIDE TO STAINLESS STEEL FINISHES 3 1D Hot rolled and annealed, and with the mill scale removed, this surface condition is classified as a 1D finish. This surface, which is found on thicker sheets and plate, is slightly coarse with very low reflectivity. It is …[PDF]

Stainless Steel – Surface Finishes - Stealth 316

Stainless Steel – Surface Finishes Introduction Surface finish is an important element in any specification of stainless steel regardless of the intended use. For those applications where appearance is important, finish is a design element and must be specified. In non-decorative applications the surface finish …

No. 2B Mill Finish Stainless Steel & Plate | Penn ...

No. 2B Mill Finish Stainless Steel & Plate. No. 2B Finish is a bright cold rolled finish, produced very similarly to the No. 2D finish.. The difference in the production lies in the final light cold rolling pass of a No 2B Finish, that is is done using polished rolls.

Stainless Steel Sheets – 304, 430 Cold Rolled, 2B Finish ...

304 Stainless Steel sheets and plates are available in several finishes, but the most common are 2B (milled) finish, #4 finish (brushed) and Chrome #8 (mirror finish) is also readily available. 2B is a milled finish that is dull grey and semi-smooth to the touch.User rating: 5/5

304 Sheet / Plate, 2B Finish (HRAP) - Online Metal Store

304 Sheet / Plate, 2B Finish (HRAP) ... Stainless Steel Sheet T-304/304L is an excellent choice for its tensile strength, high resistance to rust, and high fabrication ability. Cost-effective and versatile material, 304 sheet is suitable for most applications where durable support and corrosion resistance are required.

304 Stainless Steel Sheet #4 Brushed Finish | Stainless Supply

304 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. The 304 stainless steel sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation. Our 304 stainless steel sheet #4 finish meets the criteria for both the #3 and #4 finish.

Stainless Steel 2B & 2D Sheet - Penn Stainless Products

Stainless Steel 2B & 2D Sheet. Catalog; Penn Stainless stocks over 25 grades of stainless steel sheet. Besides standard 304, 304/L and 316/L, aerospace stainless grades such as 321, 347, 17-4Ph and 17-7Ph are stocked.[PDF]

Roughness measurements of stainless steel surfaces

Roughness measurements of stainless steel surfaces Introduction Ra value Surface roughness is a measure of the texture of a surface. It is quantified by the vertical deviations of a real surface from its ideal form. If these deviations are great, the surface is rough, if they are small, the surface is smooth. Roughness is typically considered to

2B vs. No. 4 Stainless Steel Finish | All Metals Fabrication

The 2B mill finish is achieved with an additional light cold roll pass, and is the standard finish for 201, 301, 304, 304L, and 316L stainless steel. Stainless steel with a 2B finish is generally used for bakeware and flatware, plumbing fixtures, solar panels, industrial equipment, and wheel covers.

2B, 2D and BA Cold Rolled Finishes

What Are Cold Rolled finishes?

304 Stainless Steel Sheet #4 Brushed Finish | Stainless Supply

304 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. The 304 stainless steel sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation. Our 304 stainless steel sheet #4 finish meets the criteria for both the #3 and #4 finish.

Guide to Stainless Steel Sheet Finishes | Mill, Polished ...

Stainless Steel Sheet Finishes. Stainless steel sheet is produced in many types of finishes due to the various uses and applications that stainless steel can be used in. It has become popular in kitchens due to its low maintenance, cleanliness, appearance, and corrosion resistance to food acids and water.

2B vs. No. 4 Stainless Steel Finish | All Metals Fabrication

The 2B mill finish is achieved with an additional light cold roll pass, and is the standard finish for 201, 301, 304, 304L, and 316L stainless steel. Stainless steel with a 2B finish is generally used for bakeware and flatware, plumbing fixtures, solar panels, industrial equipment, and wheel covers.

304 SHEET 2B FINISH - 1/4" Thick, 304 Sheet - Mill Finish ...

Order 304 SHEET 2B FINISH - 1/4" Thick, 304 Sheet - Mill Finish #2 , and Stainless Steel in small quantities and no minimums at The Metal Store.

Stainless Steel 2B & 2D Sheet - Penn Stainless Products

Stainless Steel 2B & 2D Sheet. Catalog; Penn Stainless stocks over 25 grades of stainless steel sheet. Besides standard 304, 304/L and 316/L, aerospace stainless grades such as 321, 347, 17-4Ph and 17-7Ph are stocked.

Home [krdtsteel]

304/ 304L/ 304H stainless sheet 2B finish ss sheet. About 304/304L/304H stainless steel. 304 304L 304H belongs to austenitic stainless steel, it is the most widely used in the 300 series materials. On the whole, the 304 304L 304H has very similar characteristics, the only difference lies in the level of carbon content, so there will be a little ...

stainless steel plate/sheet - deysteel

stainless steel plate/sheet. ... Widths : 200 / 500 / 1000 / 1250 / 1500 / 2000 mm / request 3) Finishes: No.1 / 2B / No.3 / No.4 / HL / BA / 8k / Mirror 4) Executed Standard: DIN GB AISI ASTM JIS 5) Packing: plastic bag, weaving bag, wooden case or according to the customers ... 304/ 304L stainless steel sheet. Related News [2019-02-19] Wuxi ...

stainless steel 304 2b | eBay

Find great deals on eBay for stainless steel 304 2b. Shop with confidence. Skip to main content. eBay Logo: ... 35 pounds box 11ga 304 2B Stainless Steel Sheet Plate Material Drops Welding Lot. $41.99. Was: Previous Price $69.99. or Best Offer. ... 22 GA (.030) 304 2B Finish Stainless Steel Sheet 12" x 24"! Brand New. $9.76. Buy It Now +$10.50 ...

304 Sheet / Plate, #4 Finish - Online Metal Store

304 Sheet / Plate, #4 Finish. The #4 finish is the brushed finish you see in most restaurants and professional kitchens. Stainless Steel Sheet T-304/304L is an excellent choice for its tensile strength, high resistance to rust, and high fabrication ability.

ss 304 2b finish stainless steel sheet with low price ...

11.Application: Stainless steel plate applies to construction field, ships building industry, petroleum, chemical industries, war and electricity industries, food processing . and medical industry, boiler heat exchanger, machinery and hardware fields. Stainless steel plate can be made a ccording to the customers requirements. 12.[PDF]

Leveraging Stainless Steel Finishes on Sanitary …

material. (Gauge refers to cold rolled; plate is hot rolled material.) 2B Mill Finish This is a widely used stainless steel finish, com-mon in industrial, chemical and food applications. It is corro-sion resistant and has a typcial RA range of 40 (7 gauge) to 15 (16 gauge) microinches. No. 3 Finish The No. 3 Finish uses a 120 grit abrasive. It ...

2B BA Surface Finish 304 316 Cold Rolled Stainless Steel ...

2b Ba Surface Finish 304 316 Cold Rolled Stainless Steel Sheet Plate Price , Find Complete Details about 2b Ba Surface Finish 304 316 Cold Rolled Stainless Steel Sheet Plate Price,Cold Rolled Stainless Steel Sheet Plate,Cold Rolled Stainless Steel Sheet Plate,Cold Rolled Stainless Steel Sheet Plate from Stainless Steel Sheets Supplier or Manufacturer-Zhejiang BMJ Metal Co., Ltd.

Stainless Steel Sheets, Stainless Steel Finishes, Mirror ...

304 Stainless Steel. 304 stainless steel is the most widely used commercial grade of stainless steel. 304 stainless steel sheet metal is a versatile, anti-rusting, heat resistant steel for general uses with food equipment, plumbing materials, kitchen sinks, and back splashes.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.