Tel: +86-371-86151827

s50c carbon steel plate

Steel grade:s50c carbon steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s50c carbon steel plate Introduction

S50C Plate | Malaysia S50C Carbon Steel Plate Supplier ...

1050 Carbon Steel 1050 carbon steel plate is a medium tensile low hardenability carbon steel Characterised by good strength and impact properties, with good machinability and reasonable weldability in the as supplied condition. 1050 has a low through hardening capability with sections up to around 60mm only generally recommended as suitable for ...

S50C Carbon Steel for Mechanical Structural Use in JIS G4051

S50C is also a common steel grade with wide application. It’s similar to S45C carbon steel, no matter in properties or in applications. But customers in different area will have different habit for S45C or S50C. Besides, the cost and price for both S45C and S50C steels are just little different.

S50C Plate | 1050| CK50| GB50#: Carbon Steel Supplier

Properties of S50C Carbon Steel Plate. 1050 Carbon Steel / C50 Carbon Steel / 760 Carbon Steel is characterised by good strength and impact properties, with good machinability and reasonable weldability in the as supplied condition.

S50C - BEBON steel - S50C steel plate

S 50 C steel plate, JISG4051 S 50 C steel plate, under JISG4051 standard, we can regard S 50 C steel plate as high carbon steel. JIS G4051 S50C steel plate is one mainly of high carbon steel,for the high strength medium carbon steel,the cold-work plasticity is low,the welding performance,the hardenability are bad,but non-temper brittleness ...

steel plate / sheet,S50C carbon steel plates,Corten A,B ...

Supply S50C carbon steel plates,Corten A,B steel,ASME SA-299/SA-299M C-Mn-Si steel plates,ASME SA-841/SA-841M TMCP steel,ASME SA-562/SA-562M C-Mn-Ti steel

s50c carbon steel plate - alibaba

Alibaba offers 496 s50c carbon steel plate products. About 66% of these are steel sheets, 1% are stainless steel sheets. A wide variety of s50c carbon steel plate options are …

S50C - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S50C can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Carbon Steel - Low, Medium, High Carbon Steel Supplier

In E Steel Sdn. Bhd. we are specialised in High carbon steel, low carbon steel, carbon steel plate, carbon steel flat. We are Carbon Steel Suppliers of Malaysia ...

S50c Carbon Steel Plate - Buy S50c Carbon Steel Plate ...

S50c Carbon Steel Plate , Find Complete Details about S50c Carbon Steel Plate,S50c Carbon Steel Plate,Steel Plate,Carbon Steel Plate from Steel Sheets Supplier or Manufacturer-Shandong Liaocheng Yizhong Commercial Trade Co., Ltd.[PDF]

JISG4051 S50C steel plate - steel-plate-sheet

JISG4051 S5 0C steel plate high carbon steel S5 0C steel plate, JISG4051 S5 0C steel plate, under JISG4051 standard, we can regard S5 0C steel plate as ... The equivalent standards of S50C steel S50C JIS G 4051 Comparision of steel grades DIN 1C50 AISI 1050 UNI 7846 - BS 970 - UNE 36011 - SAE J 403-AISI - Chemical Composition of S50C steel

S50C Plate | Malaysia S50C Carbon Steel Plate Supplier ...

Product Description. Characterised by good strength and impact properties, with good machinability and reasonable weldability in the as supplied condition. 1050 has a low through hardening capability with sections up to around 60mm only generally recommended as suitable …

S50C carbon steel plates,S50C carbon steel plates supplier ...

S50C carbon steel plate uses: 1, can be used for all kinds of cold work mould plate; 3, the standard template materials. JW supply high quality carbon steel plate which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to S50C carbon steel ...

S50C Carbon Steel Supplier & Stockist - New Arise Metal

S50C Carbon Steel Plate Stockist, Supplier & Exporter. S50C Carbon Steel JIS G4051 for Mechanical Structural Use. Carbon Steels have Lower carbon content than Carbon Tool Steels, and have less strict regulations on impurities.They are used in applications that require a …

S50C carbon steel plates,S50C carbon steel plates supplier ...

S50C carbon steel plate uses: 1, can be used for all kinds of cold work mould plate; 3, the standard template materials. JW supply high quality carbon steel plate which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to S50C carbon steel ...

s50c plate - MS Plates - napmr.org

S50C Carbon Steel Plate Stockist, Supplier & Exporter. S50C Carbon Steel JIS G4051 for Mechanical Structural Use. Carbon Steels have Lower carbon content than Carbon Tool Steels, and have less strict regulations on impurities.They are used in applications that require a . steel plate / sheet,S50C carbon steel plates,Corten A,B

AISI 1050 | S50C Plate | CK50 | GB50 - Carbon Steel Plate ...

AISI1050 carbon steel plate is a medium tensile low hardenability carbon steel. Description of AISI 1050 Carbon Steel Plate : AISI 1050 is a high-carbon, cold rolled steel containing approximately 0.50% carbon that can be hardened by heat treatment to a maximum hardness of approximately Rockwell C 58.

JIS G 4051 S50C steel plate high carbon steel,JIS G 4051 ...

S50C steel plate high carbon steel can be offered by Katalor industry,Katalor industry is professional JIS S50C steel plate high carbon steel exporter ,if you need JIS G 4051 S50C steel plate high carbon steel ,please contact us.

China Hot Sale S50C High Carbon Steel Plate For Plastic ...

Steel plate, carbon steel sheet, steel manufacturer / supplier in China, offering Hot Sale S50C High Carbon Steel Plate For Plastic Mould Steel, O1/1.2510 alloy steel round bar for die, 1.2083/420 stainless steel plate for plastic mould and so on.

Carbon steel material grades S50C - sheetstainlesssteel

The specimen was medium carbon steel grade JIS S50C that was hardened at56± 2 HRC. Full factorial experimental design was conducted by 3 factors and 3 . Carbon Steel 1.1730 S50C Plate in Dongguan, Guangdong, China . We are engaged in offering excellent quality Carbon Steel 1.1730 S50C Plate …

Carbon Steel Plate supplier South Korea| IS 2062 grade b ...

Carbon Steel Plate Suppliers, S50C Plate, IS 2062 grade b Supplier in South Korea, Carbon Steel Plates South Korea, Supplier of High Quality Structural Carbon Steel Plates الكربون الصلب لوحة الموردين، S50C لوحة، إس 2062 الصف b المورد، لوحات الكربون الصلب، مورد من جودة ...

China Carbon Steel Plate JIS S50c/S53c - China JIS S50c ...

JIS S50c/S53c Steel Plate, Carbon Steel Plate, Ms Sheet manufacturer / supplier in China, offering Carbon Steel Plate JIS S50c/S53c, Customized CNC Machined Stainless Steel Flanges, Promotional Price Galvanized Steel Q345b and so on.

S20C Mild Steel-JIS Standard carbon structural steel (JIS ...

OTAI SPECIAL STEEL Supply in S20C steel round bar, plate, sheet, square bar, flat bar, pipe since 2007.we have a lots s20c steel stock. S20C flat Steel bar is a high quality Quenched and Tempered Carbon Structural steel, It belong to the high quality low carbon, Low carbon chromium, molybdenum, nickel case hardening steel.

S50C STEEL PLATE - MS Plates - napmr.org

s50c carbon steel plate - alibaba. Alibaba offers 409 s50c carbon steel plate products. About 79% of these are steel sheets. A wide variety of s50c carbon steel plate options are available to you, such as aisi, astm. s50c steel plate - alibaba. A wide variety of s50c steel plate options are available to you, such as aisi, astm, and jis.

Carbon steel weight S50C - asiasteelmetal

S50C carbon steel plates,S50C carbon steel plates supplier . S50C/S53C steel, is advanced high-quality medium carbon steel, used by the electric furnace, open hearth or pure oxygen converter process all static steel . JIS G 4051 S50C steel plate,JIS G 4051 S50C high carbon steel.

1.1210 S50C SAE1050 Carbon Steel Plate for Promotion

Carbon Steel, steel plate, Mould Steel manufacturer / supplier in China, offering 1.1210 S50C SAE1050 Carbon Steel Plate for Promotion, Black Surface Hot Rolled High Speed Steel Round Bar (SKH2 T1 1.3355 W18Cr4V), Structural Special alloy High Speed Steel Plate for Cutting Tools (1.3247 M42 SKH59) and so on.

China S50c Mild Steel Plate (50#) - China Carbon Steel ...

Carbon Steel, S50c Steel Plate, Steel Plate manufacturer / supplier in China, offering S50c Mild Steel Plate (50#), High Quality Angle Steel (2#~20#), Galvanized Building Material I Beam H Beam Steel …

Carbon steel material grades S50C - KATALOR STEEL

S50C steel plate, JISG4051 S50C steel plate, under JISG4051 standard, we can regard S50C steel plate as high carbon steel. S50C steel plate is one mainly of high carbon steel,for the high strength medium carbon steel,the cold-work plasticity is low,t. S50c Material Wholesale, S50c Suppliers - Alibaba

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.