Tel: +86-371-86151827

high yield strength steel plate round bar

Steel grade:high yield strength steel plate round bar

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

high yield strength steel plate round bar Introduction

A-514-High Yield Strength, Quenched ... - Alloy steel

aasteel› …› Construction / Bridge Building (HSLA)Overview

Kromite® #3 | HT 4140 Steel | Associated Steel Corporation

High Strength Steels Kromite® #3 4140/4150 (modified) Hot Roll, Heat Treated, High Strength Alloy. Kromite #3 is a modified 4140/4150 steel. Typical hardness is Rockwell “C” 28/34.

S355 High Yeild Strength Round Bars - Triton Alloys Inc

S355 High Yeild Strength Round Bars. S355 steel round bar is belong to low alloy steel bar. S355 steel is widely used in bridges, ships, power stations, boiler, pressure vessel, oil tank, lifting transportation machinery and so on.

HY 100 Steel - Metal Alloys

HY 100 is a high yield steel with minimum yield strength of 100 ksi. While many steels offer high yield strength, HY 100 also offers exceptionally high impact strength as well. This combination makes HY 100 unique among steels. This material is used extensively in …

Carbon Steel, High-Strength-Low Alloy, Stainless Steel ...

HIGH STRENGTH LOW ALLOY BARS ASTM A-588 is a high strength steel offering a minimum yield of 50KSI for bars up to 4" thick. These bars are copper bearing bars that offer approximately two to four times the corrosion resistance of carbon steel bars without copper.

MetalsDepot® - 4140 Alloy Steel Round Bar

4140 Alloy Steel Round, is an cold drawn annealed steel of relatively high hardenability with its chromium content provides good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength. 4140 Alloy Steel Round responds well to heat-treatment and is relatively easy to machine in the annealed condition. 4140 Alloy Steel Round has good strength and wear …

Tensile and Yield Strength - Clifton Steel

Tensile and Yield Strength Posted on Tuesday, January 02, 2018 . Tensile and Yield Strength. What’s the Difference? Knowing both the yield and tensile strength is important because they both have an impact on the production and use of steel (and many other materials, but we will focus on the steel).

Products – American Metals Corporation

656-80 & 715-80 High Yield; 516-70 Standard specification for pressure vessel plates, carbon steel, for moderate-and-lower-temperature service; AR – 235/400/500 & A514 Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding; Formalloy 400 Standard specification for forming grade high-yield ...

4140 High Tensile Steel | Interlloy | Engineering Steels ...

4140 is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T).4140 is now available with improved machinability, which greatly increases feeds and/or speeds, while also extending tool life without adversley affecting mechanical properties.

S355 High Yeild Strength Round Bars - Triton Alloys Inc

S355 High Yeild Strength Round Bars. S355 steel round bar is belong to low alloy steel bar. S355 steel is widely used in bridges, ships, power stations, boiler, pressure vessel, oil tank, lifting transportation machinery and so on.

ASTM Specifications - Central Steel Service Inc.

ASTM A709-50W is a standard specification for structural steel in bridges. ASTM A709-50W covers high strength, low allow steel structural shapes, plates and bars. The atmospheric corrosion resistance of this steel in most environments is substantially better than carbon steel with or without copper addition.

SA-517-High Yield Strength, Quenched ... - Alloy steel

aasteel› Products/Industries› PVQ Carbon & Alloya Applied to both heat and product analysis b May be substituted for part or all of titanium content on a one for one basis. c Zirconium may be replaced by cerium. When cerium is added, the cerium/sulfur ratio should be approximately 1.5 to 1, based on heat analysis. Tensile Requirements

Alloy | Chatham Steel

High Strength: Quenched and tempered alloy steel plates used primarily for their high yield-t0-weight ratio. 100,000 min. yield: ASTM A-514 Construction Grade: 3/16" to 6" 4'x8' through 10'x40' Abrasion Resistant: As-Rolled AR steel, not quenched and tempered, for moderate wear applications: AR 225/235: 3/16" to 1" 4'x8' through 8'x20'

High-strength low-alloy steel - Wikipedia

High-strength low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel.HSLA steels vary from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties.Classifications·

Bar Stock, Steel Bars, Steel Rounds, Steel Flats - tmtco

Hot Rolled Steel Bars Available in rounds, squares, strips, flats, and half rounds. Please call for more information. ASTM A36: Low carbon, general purpose for structural applications. Minimum physical properties of 36,000 psi yield strength and 58,000 psi tensile strength. HR Bars 1018[PDF]

Technical Handbook Bar Products

3.3 the strength of the various steel grades 23 3.4 strength and toughness 24 3.5 properties of case–hardening steels 25 4 product datasheets 27 ... high-tensile micro-alloy steel bar 58. 4.14 atlas 303: free machining stainless steel bar 60 4.15 atlas 304: stainless steel bar 63

S355 S355J2 S355J2+N Steel - UK Supplier

West Yorkshire Steel are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S355 is supplied in the hot rolled and cold drawn conditions. The S355 steel specifications are high yield non alloy steels.

HY 80 Steel - Metal Alloys

HY 80 is a high yield steel with minimum yield strength of 80 ksi. While many steels offer high yield strength, HY 80 also offers exceptionally high impact strength as well. This combination makes HY 80 unique among steels. This material is used extensively in marine defense and petrochemical applications.

17-4PH H1150 - Stainless Steel Plate, Sheet, & Bar Products

17-4PH H1150. Penn Stainless inventory now includes Alloy 17-4 (H1150, UNS S17400) in sheet, sheet coil, plate, round bar, processed flat bar and tubular products.

High Yield Cold Forming Steel Plate | Cold Formed Steel

High Yield Cold Forming Steel Plate meets specifications 700 MC and EN10149 part 2: S700MC. We carry a stock of high yield cold forming steel plate with guaranteed mechanical properties and excellent cold formability. Our Cold Forming Steel Plate …

Online Metal Store | Small Quantity Metal Orders | Metal ...

Alloy 1018 is the most commonly available of the cold-rolled steels. It is generally available in round rod, square bar, and rectangle bar. It has a good combination of all of the typical traits of steel - strength, some ductility, and comparative ease of machining.

Beverly Steel - S690QL High Strength Quenched and …

EN10025 S690QL Structural Steel. EN10025:6:2004 Hot Rolled S690QL, Steel Number 1.8928. 690 N/MM 2 high yield, high strength structural steel plate,V notch impact tested in longitudinal direction to the rolling direction at -40degree C, thus being excellent in forming and farmacia-ita welding properties that achieve another higher level of beauty and durability in steel engineering structure.

high strength a36 hot rolled steel plate hardness

Carbon, High Strength Low Alloy and Alloy Steel 15 in. & under in thickness when ordered to thickness ... HOT ROLLED ASTM A 1011 CS Type B .071 - .171 x 36 - 72 Temper rolled, .10% max carbon, cold reduced. q345b steel hardness yield strength. Structural, Carbon & HSLA Steel PlateA572 is a high strength low alloy steel plate used in a variety ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.