Tel: +86-371-86151827

ss400 steel tensile strength steel plate

Steel grade:ss400 steel tensile strength steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

ss400 steel tensile strength steel plate Introduction

SS400|SS400 STEEL PLATE__Steel Supplier

SS400 is the Japanese steel material of a marking, the equivalent of the domestic Q235 steel. Foreign standards of structural steel often classified according to tensile strength, such as SS400 (Japan is so marked), where the minimum value of 400 means that σb to 400MPa high strength steel is σb ≥ 1373 Mpa steel. [Chemical composition (%)]

JIS G3101 SS 400 steel plate standard, specification and ...

SS400 is one of the most commonly used hot rolled general structural steel.SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.

JIS G3101 SS400 Structural Carbon Steel Plate Specification

Advantages of JIS G3101 SS400: Compared with other steel standard, steel products made of ss400 carbon steel is popular for proper tensile strength and toughness, good plasticity, welding performance and processing property. Steel plate thickness has wide range-from steel sheet to super heavy steel plate. JIS G3101 ss400 Equivalent Material:[PDF]

JIS G3101 SS400 steel plate/sheet for general purpose ...

regard SS400 steel plate/sheet for general purpose structural steel . JIS G3101 SS400 is a technical delivery conditions for general purpose structural steel .JIS G3101 SS400 is a type of steel sheet under JIS standard which is used to build ship, bridge, belongs to high strength sheet. JIS

SS400 Structural Steel - An Overview - meadinfo.org

SS400 Structural Steel - An Overview ... JIS G 3101 SS400 is one of the most commonly used hot rolled general structural steel. Supplied as plates, sheets, flats, bars, sections etc. ... Density (kg/m3) 7860 Young’s Modulus (GPa) 190-210 Tensile Strength (MPa) 400 – 510 MPa Yield Strength (MPa) 205-245 MPa Poisson's ratio 0.26 SS400 ...

SS400 steel plate and Q235 steel plate - Jaway Steel

SS400 is a way of marking the Japanese steel material, equivalent to the domestic Q235 steel. Foreign standards often classify the structural steel material according to the tensile strength, such as discount price sale SS400 steel plate, SS400 which means that the tensile strength is 400Mpa minimum.

Mild Steel Plates A36 / SS400 | Regan Industrial

A36 steel in plates, bars, and shapes with a thickness of less than 8 in (203 mm) has a minimum yield strength of 36,000 psi (250 MPa) and ultimate tensile strength of 58,000–80,000 psi (400–550 MPa). Plates thicker than 8 in have a 32,000 psi (220 MPa) yield strength and the same ultimate tensile strength.

Ss400 Plate Tensile Strength, Ss400 Plate Tensile Strength ...

Related Searches for ss400 plate tensile strength: mild steel tensile strength tensile strength tester single yarn strength tester rubber tensile strength test bolt tensile testing machine direct tensile strength astm film tensile strength tester ductile iron tensile strength threaded rod tensile strength tensile environmental chamber lab testing equipment tensile tensile strength of en8 round ...

JIS G3101 SS 400 steel,JIS G3101 SS 400 steel steel plate ...

JIS G3101 SS 400 steel mechanical property: JIS G3101 SS400 is a technical delivery conditions for general purpose structural steel.JIS G3101 SS400 is a type of steel sheet under JIS standard which is used to build ship, bridge, belongs to high strength sheet.

SS400 Steel - JIS G3101 General Structure Hot Rolled

SS400 is a material grade and designation defined in JIS G 3101 standard. JIS G 3101 is a Japanese material standard for hot Rolled steel plates, sheets, strips for general structural usage. The structural quality hot rolled SS400 steel is more reliable in its tensile strength than SS330 steel.

Q235 Steel Plate Equivalent Steel Standard-ASTM A36

Tensile strength of 20# steel is not less than 410, yield strength is not less than 245, and mechanical properties of A36 are about the same. Comparison of A36, SS400 and Q235 plate: As can be seen from data above, ASME standard A36 and China standard Q235 materials are named according to yield strength of material, and for SS400 is tensile ...

ss400 ultimate tensile strength - MS Plates

ss400 ultimate tensile strength, steel,Hot sell ss400 ultimate tensile strength, MS Plates stock in China,China ss400 ultimate tensile strength, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled ss400 ultimate tensile strength, MS Plates in stock each month. We can meet our customer's any quantity request.

How does A36 mild steel and SS400 differ? - Quora

Jul 05, 2018· (The mechanical properties of SS400 and Q235 are taken as examples when the thickness of steel plate is less than 16 mm.) From the above data, it can be seen that the materials of ASME standard A36 and China standard Q235 are named for the yield strength of materials, while SS400 is named for the tensile strength of materials. From the analysis ...What is the difference between stainless steel grade SS304 ...Jan 28, 2019What is an ASTM A36 Steel equivalent?Nov 22, 2018What is the international equivalent grade for steel ...Sep 07, 2015See more results

JIS G3101 SS 400 steel plate standard, specification and ...

SS400 is one of the most commonly used hot rolled general structural steel.SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.

ss400 ultimate tensile strength - MS Plates

ss400 ultimate tensile strength, steel,Hot sell ss400 ultimate tensile strength, MS Plates stock in China,China ss400 ultimate tensile strength, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled ss400 ultimate tensile strength, MS Plates in stock each month. We can meet our customer's any quantity request.

tensile strength ss400 - MS Plates - napmr.org

tensile strength ss400, steel,Hot sell tensile strength ss400, MS Plates stock in China,China tensile strength ss400, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled tensile strength ss400, MS Plates in stock each month. We can meet our customer's any quantity request.

SS400 steel plate| SS400 steel suppliers|SS 400 Plate ...

As well as being available from stock all SS400 Steel Plate can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems.Our SS400 Steel Plate are sourced from the highest quality steel manufacturers in the world and, like all our suppliers, these manufacturers have been vetted ...

Comparison of S235JR and SS400 steel--Xin Steel Industrial ...

S235JR is common steel grade in European steel standard specification EN 10025-2 which are mainly used to produce structural parts of the bolted and welded steel in dustrial area.. SS400 in Japan steel specification JIS G3101 is also one mild steel grade.Grade S235JR and SS400 are both common carbon structural steels.Type steel plates are making steel tanks in Oil and gas industry.

How does A36 mild steel and SS400 differ? - Quora

(The mechanical properties of SS400 and Q235 are taken as examples when the thickness of steel plate is less than 16 mm.) From the above data, it can be seen that the materials of ASME standard A36 and China standard Q235 are named for the yield strength of materials, while SS400 is named for the tensile strength of materials. From the analysis ...

SS 400 Carbon Steel Plates Manufacturer in India

SS 400 Carbon Steel Plates Manufacturer in India. Superior Steel Oveseas is prominent manufacturer, supplier & exporter of SS 400 Carbon Steel Plates .Our offered SS 400 Carbon Steel Sheets can be used for a wide range of applications.We are largest stockholder of SS 400 CS Plates ,JIS3101 SS400 steel plate, under JIS3101 standard, we can regard Carbon Steel SS 400 Plate as Carbon and low ...

SS400,SS400 STEEL,SS400 PLATE

Common carbon structural steel plate SS400 is most used by tank manufacturers all over the world.The equivalent steel grades are ASTM A36 carbon steel plate,Din 17100 St37-2 structural steel plate,GB Q235B carbon steel plate.

Structural Steels - Carbon Steel Plates Wholesale Trader ...

This is common CarbonSteel Plates in S235JR, S235J0 and S235J2 steel grade. Heat analysis shall be used to determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test. Specifications: S symbol for structural steel

Q235 Steel Plate Equivalent Steel Standard-ASTM A36

Tensile strength of 20# steel is not less than 410, yield strength is not less than 245, and mechanical properties of A36 are about the same. Comparison of A36, SS400 and Q235 plate: As can be seen from data above, ASME standard A36 and China standard Q235 materials are named according to yield strength of material, and for SS400 is tensile ...

Astm A283 Ss400 S235jr St37 2 A36 Steel Plate

A36 equivalent material grade, ASTM A36 equivalent grade . The A36 equivalent material grade, ASTM A36 equivalent grades are ASTM A283C, JIS G3101 SS400, JIS G3106 SM400A, EN10025-2 S235JR, DIN17100 ST37-2, FE360B, E24-2, etc. A36 equivalent material grade ASTM A283C: A283 steel is a structural carbon steel plate utilized for applications requiring low or intermediate tensile strength.

S275 Structural Steel Plate, S275JR Structural Steel Plate ...

Conquest Steel and Alloys is India Based Leading Supplier and Stockist of High Quality and Speciality Steel Such as S275 Structural Steel Plate, S275 Structural High Tensile Steel Plates Available in Ready Stock of IS 2062 E300 A Steel Plate Exporter located in Mumbai, India.

Ss400 Steel Plate Thickness, Ss400 Steel Plate ... - Alibaba

Alibaba offers 4,082 ss400 steel plate thickness products. About 94% of these are steel sheets, 1% are stainless steel sheets, and 1% are steel pipes. A wide variety of ss400 steel plate thickness options are available to you, such as aisi, astm.

ASTM A36 (SS400, S275) Structural Carbon Steel ...

ASTM A36 carbon steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. Cited properties are appropriate for the as-fabricated (no temper or treatment) condition. It has a very high electrical conductivity among the wrought carbon or non-alloy steels in the database.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.