Tel: +86-371-86151827

310 stainless steel welding coil steels

Steel grade:310 stainless steel welding coil steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

310 stainless steel welding coil steels Introduction

310 - Rolled Alloys, Inc.

Excellent resistance to oxidation under mildly cyclic conditions through 2000°F characterizes 310. Because of its high chromium and medium nickel contents, 310 has good resistance to sulfidation and other forms of hot corrosion. 310 is widely used in moderately carburizing atmospheres such as encountered in petrochemical environments.

Stainless Steel 310 Wire - Guru Gautam Steels

Guru Gautam Steels is one of the Leaders Amongst Manufacturers and Exporters of Stainless Steel 310 Wire, ASTM 310 Wire, SS 310 Wire Bobbin, SS 310 Wire Coil, SS ASME 310 Wire Bobbin, SS AISI 310 Filler Wire, UNS S31000 Wire.

310 Stainless Steel Wire UNS S31000 | Ulbrich

Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM A5167, ASTM A 276, ASTM 314, ASTM 580, QQ-S-763. 310 Alloy Description. Alloy 310 stainless is an austenitic stainless steel with a high nickel and chromium content which makes the alloy heat resistant with excellent resistance to oxidation under mildly cyclic conditions through 2000ºF.

310 Stainless Steel UNS S31000 | Ulbrich

Type 310 stainless is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000 °F. Learn more here about its applications and properties. ... Coil, Foil & Wire, ASTM A5167, ASTM A 276, ASTM 314, ASTM 580, QQ-S-763 ... SSINA's "Welding of Stainless Steels and Other Joining Methods".[PDF]

STAINLESS STEEL MIG SOLID WIRE Techalloy 310

STAINLESS STEEL MIG SOLID WIRE Techalloy® 310 electrodes are used for welding stainless steels of similar composition in cast and wrought forms. The weld deposit is fully austenitic, and as such, calls for minimal heat input during welding. Applications: Head shields, Furnace parts, Ducting

The wide world of welding stainless steel - The FABRICATOR

thefabricator› Article› Metals/MaterialsThe development of nonrusting stainless steels with distinct attributes that include varying degrees of corrosion resistance, strength, and workability has been a tremendous benefit to steel users. This development, however, also has made welding stainless steel more complicated than welding ...

Stainless Steel Grade 310 – Austral Wright Metals

Stainless Steel Grade 310 is a medium carbon austenitic stainless steel, for high temperature applications such as furnace and heat treatment equipment. Home; ... In common with other austenitic stainless steels, these grades cannot be hardened by heat treatment. They can be hardened by cold work, but this is rarely practiced.

AISI SS 310S / 310H Wire & Welding Rod | Stardust

Like most of the austenitic stainless steels, this alloy can be readily welded using fusion or resistance methods. Oxyacetylene welding should not be used. Filler metal should be AWS E/ER 310. 310S (UNS S31008) is the low carbon version of the alloy.

Stainless Steel - Properties and Applications of Grades ...

Welding of Grade 310/310S Stainless Steel. Welding Grades 310/310S are welded with matching electrodes and filler metals. The alloys are readily welded by SMAW (manual), GMAW (MIG), GTAW (TIG) and SAW. Electrodes to AWS A5.4 E310-XX and A 5.22 E310T-X, and filler metal AWS A5.9 ER310 are used.

Alloy 310S - Stainless Steels from NeoNickel

Alloy 310S is not suggested for the severe thermal shock of repeated liquid quenching. The grain size and carbon content meets both 310S and 310H requirements. Alloy 310S is often used at cryogenic temperatures, with excellent toughness and low magnetic permeability. Alloy 310S has good machinability and is readily fabricated.

Stainless Steel - Grade 310 (UNS S31000)

Topics Covered

300 Series SS Sheets, Plates, Coils, Patta, Patti ...

Wholesale Supplier of 300 Series SS Sheets, Plates, Coils, Patta, Patti - Stainless Steel 316 Sheet, 317L Stainless Steel Plates, Stainless Steel 310S Sheets and Stainless Steel Sheets offered by Solitaire Impex, Mumbai, Maharashtra.[PDF]

Stainless Steels - m.lincolnelectric

WELDING OF STAINLESS STEELS 1.0 INTRODUCTION Stainless steels are defined as iron base alloys which contain at least 10.5% chromium. The thin but dense chromium oxide film which forms on the surface of a stainless steel provides corrosion resistance and prevents further oxidation. There are five types of stainless steels depending on the other ...

Alloy 310S - Stainless Steels from NeoNickel

Alloy 310S is not suggested for the severe thermal shock of repeated liquid quenching. The grain size and carbon content meets both 310S and 310H requirements. Alloy 310S is often used at cryogenic temperatures, with excellent toughness and low magnetic permeability. Alloy 310S has good machinability and is readily fabricated.

Alloy 310/310S Heat Resistant Stainless Steel Plate ...

Sandmeyer stocks Alloy 310/310S, a multi-purpose austenitic heat resistant stainless steel with oxidation resistance under mildly cyclic conditions to 2010°F. Sandmeyer Steel Company stocks Alloy 310/310S, a multi-purpose austenitic heat resistant stainless steel with oxidation resistance under mildly cyclic conditions to 2010°F. ...[PDF]

WELDING OF STAINLESS STEELS AND OTHER JOINING …

Stainless Steel Welding Characteristics By definition, stainless steels are iron-base alloys containing 10% or more chromium, which imparts to the metal the corrosion-resistant properties for which stainless steels are so highly regarded. The chromium content may be increased and other alloying elements added or adjusted to meet specific end-

Manufacturers Of ASTM A240 310 Stainless Steel Coil | SS ...

Manufacturer, Distributors, exporters Of high quality T-310 Stainless Steel Coil, Stainless Steel 310 Coil, SS 310 Coil, UNS S31000 Coil, 1.4840 stainless steel Coil at cheapest price in mumbai,india. ... » 310 Stainless Steel Coil Used in Welding filler wire and electrodes ... Possible alternative grades to grade 310 stainless steels are ...

Stainless Steel 310S Wire - Guru Gautam Steels

Guru Gautam Steels is one of the Leaders Amongst Manufacturers and Exporters of Stainless Steel 310S Wire, ASTM 310S Wire, SS 310S Wire Bobbin, SS 310S Wire Coil, SS ASME 310S Wire Bobbin, SS AISI 310S Filler Wire, UNS S31008 Wire.[PDF]

Stainless steel grade chart - Atlas Steels Australia

Stainless steel grade chart ATLAS STEELS – SPECIALTY STEELS PRODUCT REFERENCE MANUAL ... Austenitic stainless steels Plate Annealed 600 310 40 95 HRB Sheet Annealed 515 205 40 95 HRB ... Sulphite liquors and acids such as acetic, citric, lactic and nitric. Welding wire for joining dissimilar steels. Excellent corrosion resistance at normal ...

Welding of austenitic stainless steel - Job Knowledge 103 ...

Welding of austenitic stainless steel. ... (Job Knowledge No.44), the fully austenitic steels falling within the vertically blue area in Fig.1 such as type 310 are particularly sensitive. ... It is a sluggish process and is not a problem during welding of the austenitic stainless steels, but can occur in elevated temperature service or if the ...

Ferrite Content in Austenitic Stainless Steels - Rolled Alloys

Ferrite Content in Austenitic Stainless Steels The basic 300 series stainless materials like 304/L and 316/L have an austenitic microstructure and are non-magnetic. That is, in the annealed condition they are essentially free of ferrite, which is magnetic.

MTS :: Stainless Steel Page - Material Tech

Stainless Steel available in plate, sheet, coil, bar, tubes, pipes, fittings, wire mesh, welding wire, MIG/TIG, and electrodes. Shintu Inc., is a multi national metals and related materials distributor. Our global operations cover North America, Europe, the Middle East and Asia. ... 3CR12/ UNS 41003 ...

Dissimilar welding of AISI 310 austenitic stainless steel ...

The current work was carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel–chromium superalloy. The welds were produced using four types of filler materials; the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and 310 austenitic stainless steels.

Stainless Steel Weld Materials - Weld Mold Company

Recommended for welding base metals of a similar composition. This alloy is also used to weld types 309, 311, 314 and 446 stainless steel alloys as well as dissimilar metals such as high-carbon steel, stainless armor clad and air-hardening types 405, 410 and 430. Uses include fabrication of high-pressure boiler tubes, overlays and casting repair.[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades[PDF]

STAINLESS STEEL - aksteel

AK Steel Type 430 is one of the most widely used of the “non-hardenable” ferritic stainless steels. With nominal 16% chromium it combines good corrosion resistance and heat and oxidation resistance up to 1500 °F (816 °C) with good mechanical properties. Type 430 is a non-stabilized stainless steel and as such is not suitable for all

ER310 - WeldWireWeldWire

ER310 is used for the welding of stainless steels of similar composition in wrought or cast form. The weld deposit is fully austenitic and calls for low heat during welding. This filler metal can also be used for dissimilar welding.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.