Tel: +86-371-86151827

carbon steel plate ss400 chemical composition

Steel grade:carbon steel plate ss400 chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

carbon steel plate ss400 chemical composition Introduction

SS400 steel plate - BEBON INTERNATIONAL

SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.When customers order SS400 steel plate from us,our mill should ...

JIS G3101 SS400 Structural Carbon Steel Plate Specification

JIS G3101 ss400 structural carbon steel plate specification. JIS 3101 SS400 Steel Products: JIS G3101 SS400 is one of the most common carbon structural steel grade, other grades of JIS G3101 are ss330, ss490, ss540. Related product type includes steel plate, steel sheet, steel sections, steel pipes, etc.

SS400 Chemical Composition,SS400 Mechanical Properties ...

SS400 Chemical Composition. As per JIS G 3101, Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels. JIS G 3101 SS400 is one of the most commonly used hot rolled general structural steel.

SS400 steel plate| SS400 steel suppliers|SS 400 Plate ...

This specification of SS400 steel plate covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. Heat analysis shall be used to determine the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, and copper.

SS400 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SS400 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

JIS G3101 SS 400 steel plate standard, specification and ...

SS400 steel plate. Heat analysis shall be used to determine the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test and must conform to the required tensile properties.SS400 is a Japanese standard steel whose material is 1.0037.

JIS SS400 steel plate - bebonchina

JIS SS400 steel plate. SS400 steel plate Chemical analysis -% by mass*.

chemical composition of ss400 - hopkinsplasticsurgery

chemical composition ss400\ chemical composition ss400 . ss400 steel is one of the most widely used carbon steel bars specification for constructural purpose, with good merchanical and weldable properties, minimum physical properties of 235 MPa yield strength.

SS400,SS400 STEEL,SS400 PLATE

Common carbon structural steel plate SS400 is most used by tank manufacturers all over the world.The equivalent steel grades are ASTM A36 carbon steel plate,Din 17100 St37-2 structural steel plate,GB Q235B carbon steel plate.Now Xinsteel’s rolling range for mild steel plate SS400 is thickness from 2mm to 650mm,width from 1200-4000mm and length from ...

SS400|SS400 STEEL PLATE__Steel Supplier

SS400|SS400 STEEL PLATE. SS400 is the Japanese steel material of a marking, the equivalent of the domestic Q235 steel. Foreign standards of structural steel often classified according to tensile strength, such as SS400 (Japan is so marked), where the minimum value of 400 means that σb to 400MPa high strength steel is σb ≥ 1373 Mpa steel.[PDF]

Carbon Steel Handbook - Metabunk

Medium-carbon steels (0.25–0.55% carbon) are often heat-treated. (quenched and tempered) to achieve yet higher strength, but it is mainly. the compositions below 0.35% carbon that are relevant to this report. Carbon steel is one of the most widely used materials in the industry.

Structural Steels - Carbon Steel Plates Wholesale Trader ...

SS400 Steel Plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.When customers order SS400 steel plate from us,our mill should be roll them completely according to …

SS400 chemical composition - hopkinsplasticsurgery

SS400 steel plate - BEBON INTERNATIONALWe keep more than 1000 tons SS400 steel in stock every month. If you want to get the SS400 steel price, please do not hesitate to contact us. Any need in SS400 Chemical Composition and Mechanical Properties, please feel free to …

ss400 chemical composition - carbon-steeltube

JIS SS400 steel plate BEBON steel is JIS SS400 steel supplier,we have much experience in manufacture JIS SS400 steel, We could give the fastest delivery time on the base of our competitive price directly from our mill. if you need know steel grade feature,we can provide JIS SS400 chemical composition and JIS SS400 mechanical properties.

SS400 - steel-grades

SS400. This page provides SS400 datasheet, SS400 mechanical properties, chemical element SS400, technical specifications of SS400 steel material properties. SS400 performance specifications.

SS400 Structural Steel - An Overview - meadinfo.org

SS400 Chemical Composition As per JIS G 3101, Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels. Melting Point. Melting point of SS400 is 1430 Degree Celsius . Related JIS S45C - Mild Steel - An Overview SUS304 Stainless Steel - An ...

q345b steel specification pdf chemical composition ...

ASTM A36 and Q235B Compare. ... material from the felt A36 and mechanical properties of high-quality carbon structural steel 20 ... chemical composition. SS400 steel plate,SS400 steel supplier,SS400 Chemical ..... we are SS400 steel supplier in China ,if you need SS400 steel price and specification, ... alloy steel SS400 steel plate is ...

ss400 chemical composition - pressure-vessel-steel

chemical composition ss400\ chemical composition ss400 ss400 steel is one of the most widely used carbon steel bars specification for constructural purpose, with good merchanical and weldable properties, minimum physical properties of … JIS G3101 SS400,JIS G3101 SS400 steel plate,JIS … Main chemical composition in JIS G3101 SS400 steel : Phosphorus max 0.050,Sulphur max 0.050.

SS400 chemical composition - MS Plates - napmr.org

chemical composition ss400, View steel equivalent ss400 . chemical composition ss400\ chemical composition ss400 . ss400 steel is one of the most widely used carbon steel bars specification for constructural purpose, with good merchanical and weldable properties, minimum physical properties of 235 MPa yield strength.

SS400|SS400 STEEL PLATE__Steel Supplier

SS400|SS400 STEEL PLATE. SS400 is the Japanese steel material of a marking, the equivalent of the domestic Q235 steel. Foreign standards of structural steel often classified according to tensile strength, such as SS400 (Japan is so marked), where the minimum value of 400 means that σb to 400MPa high strength steel is σb ≥ 1373 Mpa steel.

SS 400 Carbon Steel Plates - superiorsteeloverseas

SS400 Carbon Steel CR Plates Supplier, Carbon Steel SS400 CR Plates Exporter, CS SS400 High Quality Plates Stockholder, CS SS400 Cold Rolled Plate …

Structural Steels - Carbon Steel Plates Wholesale Trader ...

SS400 Steel Plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.When customers order SS400 steel plate from us,our mill should be roll them completely according to …

ASTM A36 (SS400, S275) Structural Carbon Steel ...

ASTM A36 (SS400, S275) Structural Carbon Steel. ASTM A36 carbon steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. Cited properties are appropriate for the as-fabricated (no temper or treatment) condition. It has a very high electrical conductivity among the wrought carbon or non-alloy steels in the database.

ss400 meterial chemical composition - MS Plates

ss400 meterial chemical composition, steel,Hot sell ss400 meterial chemical composition, MS Plates stock in China,China ss400 meterial chemical composition, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled ss400 meterial chemical composition, MS Plates in stock each month. We can meet our customer's any quantity request.[PDF]

ASTM A36 Mild/Low Carbon Steel - hrsteelservice

ASTM A36 is the most commonly used mild and hot-rolled steel. It has excellent welding properties and is suitable for grinding, punching, tapping, drilling and ... Chemical Composition Element Content Carbon, C 0.25 - 0.290 % Copper, Cu 0.20% Iron, Fe 98.0% Manganese, Mn 1.03% ... ASTM A36 Mild/Low Carbon Steel. CARBON STRUCTURAL STEEL PLATE ...

Q235 Steel Plate Equivalent Steel Standard-ASTM A36

Q235 steel plate equivalent steel standard-astm a36. If only from mechanical properties of materials, it is acknowledged that mechanical properties of A36 and SS400 are similar to those of high quality carbon structural steel 20#. Tensile strength of 20# steel is not less than 410; yield strength is not less than 245; mechanical properties of SS400 and A36 are about the same.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.