Tel: +86-371-86151827

carbon steel plate a53

Steel grade:carbon steel plate a53

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

carbon steel plate a53 Introduction

ASTM A53 Pipe Specifications | American Piping Products

Scope[PDF]

CARBON GRADE COMPARISON CHART: ASTM A106 VS …

AMERICA’S LARGEST DISTRIBUTOR OF SEAMLESS STEEL PIPE ASTM A106 ASTM A106 ASME SA106 ASME SA106 ASTM A53 API 5L-44 Gr. B Gr. C Gr. B Gr. C Gr. B B PSL1 ... For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of

Differences between ASTM A53 B and ASTM A106 B Steel Pipe

ASTM A106 standard specification covers the seamless carbon steel pipe, applied for high-temperature services. Different types and grades for both standard ASTM A53 steel pipe types and grades. For ASTM A53 there are ERW and seamless steel pipes Type F, E, S covers Grade A and B. A53 Type F, furnace butt welded, continuous weld Grade A

Deacon Industrial Supply Company - Carbon Steel Welded ...

Carbon Steel Welded Pipe A53 Carbon Steel Seamless Pipe A106B ... CEILING PLATES HEATING PRODUCTS, PUMPS AND SPECIALS. COMMERCIAL BOILERS BELL AND GOSSETT INSTRUMENTATION. THERMOMETERS & WELLS ...

A53 Carbon Steel Plate, A53 Carbon Steel Plate Suppliers ...

Alibaba offers 834 a53 carbon steel plate products. About 37% of these are steel sheets, 1% are stainless steel sheets. A wide variety of a53 carbon steel plate options are available to you, such as 10#, 20#, and a53(a,b).

A53 Steel Pipe - A106 Seamless Steel Pipe | Industrial ...

industrialtube› PipeASTM A53 seamless and welded steel pipe is a general, all-purpose pipe. Designed for coiling, bending and flanging, A53 carbon steel pipe is suitable for welding. The grades denote certain chemical and mechanical properties and should be noted in selection.

Astm A36 A53 Mild Steel Plate, Astm A36 A53 Mild Steel ...

Alibaba offers 364 astm a36 a53 mild steel plate products. About 71% of these are steel sheets. A wide variety of astm a36 a53 mild steel plate options are available to you, such as aisi, din, and astm.

Carbon Steel Pipe - Seamless & Welded Steel Pipe ...

Carbon steel pipe can be structural in nature or used in fluid, gas, and oil transmission. I.T.S. stocks carbon steel piping in ASTM A500, A53, and A106 specifications. The grade indicates the testing methods required for a given application.

ASTM S/A 53 Carbon Steel Pipe & Tube | A53 Carbon Steel ...

ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26. A 53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines.

What is an ASTM A36 Steel equivalent? - Quora

Nov 22, 2018· A36 is a steel for carbon structure. It is a steel of American ASTM standard. ASTM A36 is equivalent to Q235 in the Chinese standard, but it cannot be directly replaced by Q235 because the Mn content and σs and σb of Q235 do not meet the requireme...What does A36 stand for?Jan 07, 2019How does A36 mild steel and SS400 differ?Nov 24, 2018Which is the AMD equivalent of Intel i5 processor?Mar 28, 2018What is the equivalent in English of the Spanish names ...Feb 19, 2018See more results

A53 Black Carbon Steel Pipe - hopkinsplasticsurgery

ASTM S/A 53 Carbon Steel Pipe & Tube | A53 Carbon … Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in …

ASTM a53, a105 and a333 specifications | Bryzos Steel

ASTM A53 covers welded, seamless, and hot-dipped galvanized wall pipe for flanging, bending and other purposes which are suitable for welding. ASTM A105. A 105 is a steel specification that covers components such as valves, flanges, and fittings. The material is forged carbon steel.

ASTM A53 Grade A & B Steel Pipe - octalsteel

A 751 The test plan for chemical analysis of pipes and steel plates, steel products. f. A 865 The definitions for threaded coupling, carbon steel and hot galvanized zinc coated welded and seamless, for the joints of the steel pipe. ... Raw materials of ASTM A53 pipe. The steel for making ASTM A53 pipe (both for seamless and welded) shall be ...

ASTM A53 Gr.B Carbon Steel Pipe

ASTM A53 steel pipe covers seamless and welded black and hot-dipped galvanized steel pipe in DN6-DN650, ASTM A53 carbon steel pipe may be furnished in the type F ,Type E and Type S. grade including of garde A and grade B,Now, ASTM A53 Gr.B welded pipe in stocks a full range of NPS ¼" to 30" diameter and Schedules 10 through 160, STD, XH and XXH.

ASTM A53 Gr. B black carbon steel pipe for oil and gas ...

abter steel pipe,seamless and carbon steel pipe,casing and tubing pipe ASTM A53 Gr. B black carbon steel pipe for oil and gas pipelines Carbon steel pipe use for construction ,building filed , low pressure liquid, water, gas, oil, line pipe.

A36/A53/Ss400 Mild Steel Plate - tjtgwy.en.made-in …

A36/A53/Ss400 Mild Steel Plate, Mild Steel Plate, Mild Steel manufacturer / supplier in China, offering A36/A53/Ss400 Mild Steel Plate, Brass Strip/ Bronze Strip, ASTM Brass Tube / Brass Pipe and so on.

What difference between A106 steel pipe and A53 steel pipe?

ASTM A53 is Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. ASTM A106 is Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service. API 5L is Specification for Line Pipe.

Carbon steel,Alloy steel,Spring steel Metals Manufacturer ...

q345b steel grade chemical composition; ss 904l yield strength; st52 3 steel number. Alloy Steel. a36 steel strength; s355j2 q345d; a516 gr.70 normalized plate; ss 304 in sulfuric acid; 304l stainless steel uses; a53 grade b number; sus 304l composition; api 5l x46 psl2. Pressure Vessel Steel. sa179 jis; ss 304l work hardening; 34crmo4 steel ...

Stainless Steel, Carbon Steel, Alloy Steel, High Nickel ...

One of the largest Manufacturer, Supplier, Stockiest, Importer and Exporter of Stainless Steel, Carbon Steel, Alloy Steel, High Nickel Alloys, Special Alloys, Aluminium Alloys, Copper Nickel, Titanium Alloys, Duplex & Super Duplex at very low prices from Mumbai, India.

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.

Quality Steel Plate Pipe & Seamless Stainless Steel Pipe ...

SHANGHAI IRON AND STEEL CO.,LTD. is best Steel Plate Pipe, Seamless Stainless Steel Pipe and Seamless Carbon Steel Pipe supplier, we has good quality products & service from China.[PDF]

steelwise Keeping tabs on ASTM specifications aRE …

Steel Pipe The material specification for steel pipe used in structural frames is ASTM A53 Grade B (F y = 35 ksi, F u = 60 ksi). In some regions, ASTM A53 material is more readily available than ASTM A500 for round cross-sections. See the sidebar “12 Tid-bits” for further information. plate products See Summary in Table 2. Structural Plates

Carbon Steel Seamless Tubes - piyushsteel

Piyush Steel manufacture & export wide selections of Carbon Steel Seamless Tubes at most attractive price around the globe which satisfy the requirements of both strength and durability. We supply Carbon Steel Seamless Tubes in small/large quantity.

ASTM A53 B Carbon Steel Pipes - Allowable Pressure

Maximum allowable pressure is calculated with the Barlow's formula for A53 Grade B Seamless and Welded Standard Steel Pipe with Yield Strength 35000 psi and design factor 0.7.. Allowable stress used in the Barlow's formula is calculated as (35000 psi) 0.7 = 24500 psi Note! - in codes like ASME B31.3 modified versions of the Barlow's formula - like the Boardman formula and the Lame formula ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.