Tel: +86-371-86151827

astm a792 cs b 55 percent alloy coated steel sheet

Steel grade:astm a792 cs b 55 percent alloy coated steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a792 cs b 55 percent alloy coated steel sheet Introduction

[PDF]

Standard Specification for Steel Sheet, 55 % Aluminum …

Steel sheet, 55 % aluminum-zinc alloy-coated, Forming Steel (FS), ASTM A 792 – , coating designation AZ55, chemical treatment, no oil, minimum 0.035 by 36 in. by coil, 48-in. maximum OD, 24-in. ID, 10 000-lb maximum, for muffler wrappers. Steel sheet, 55 % aluminum-zinc alloy-coated, Commercial Steel (CS Type A), ASTM A 792M – , coating ...

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc ...

ASTM A792 / A792M-10(2015), Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process, ASTM International, West Conshohocken, PA, 2015, astm.org.[PDF]

55% ALUMINUM-ZINC ALLOY COATED STEEL Grade …

55% ALUMINUM-ZINC ALLOY COATED STEEL Grade Data Sheet 55% Aluminum-Zinc Alloy Coated Steel - hot-dip aluminum & zinc alloy coated structural steel

Astm A792 Sglcc Az150 Alu zinc Alloy Metal Sheet

ASTM A792 SGLCC AZ150 galvalume Alu-Zinc Alloy metal , ASTM A792 SGLCC AZ150 G550 Hot dipped galvalume Alu-Zinc Alloy metal sheet 1 Product Details Standard EN10215, JIS G3321, ASTM A792, AS1397-2001. Astm A792 Cs-b 55% Aluminum-zinc Alloy Coated Steel Sheet. The aluminum-zinc alloy for 55% Al-Zn alloy-coated steel coils consists of 55% ...

ASTM A 792 Specifications for Steel Sheet, 55 % Aluminum ...

Standard Specifications for ASTM A 792 Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process - Info Provided by MEsteel. ASTM A792-01, Norms For 55 % Al-Zn Alloy-Coated Steel Sheet By Hot-Dip Process [Alu-Zinc, Galvalume] ... F CS Type B describes the typical commercial quality product previously included in this specification.

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc ...

ASTM A792 / A792M-08, Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process, ASTM International, West Conshohocken, PA, 2008, astm.org.[PDF]

TT ee cc hh nn iicc aa ll BB uu llllee ttiinn - U.S. Steel

Commercial Steel (CS) Types A, B, C HDG and AZ Commercial Quality (CQ), ... producers for 55% Aluminum-Zinc Alloy-Coated Steel Sheet TT ee cc hh nn iicc aa ll BB uu llllee ttiinn ... ASTM A 653-04a applies to HDG-coated steel sheets. ASTM A 792-02 applies to[PDF]

the Hot-Dip Process1 - United Metal Products

2. Referenced Documents 2.1 ASTM Standards:2 A 90/A 90M Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings A 308/A 308M Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

ASTM A 792 Specifications for Steel Sheet, 55 % Aluminum ...

Standard Specifications for ASTM A 792 Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process - Info Provided by MEsteel. ASTM A792-01, Norms For 55 % Al-Zn Alloy-Coated Steel Sheet By Hot-Dip Process [Alu-Zinc, Galvalume] ... F CS Type B describes the typical commercial quality product previously included in this specification.[PDF]

55% ALUMINUM-ZINC ALLOY COATED STEEL Grade …

55% ALUMINUM-ZINC ALLOY COATED STEEL Grade Data Sheet 55% Aluminum-Zinc Alloy Coated Steel - hot-dip aluminum & zinc alloy coated structural steel

Astm A792 Sglcc Az150 Alu zinc Alloy Metal Sheet

ASTM A792 SGLCC AZ150 galvalume Alu-Zinc Alloy metal , ASTM A792 SGLCC AZ150 G550 Hot dipped galvalume Alu-Zinc Alloy metal sheet 1 Product Details Standard EN10215, JIS G3321, ASTM A792, AS1397-2001. Astm A792 Cs-b 55% Aluminum-zinc Alloy Coated Steel Sheet. The aluminum-zinc alloy for 55% Al-Zn alloy-coated steel coils consists of 55% ...[PDF]

55 Aluminum-Zinc Alloy Coated Steel Grade Data Sheets

55% ALUMINUM-ZINC ALLOY COATED STEEL Grade Data Sheet 55% Aluminum-Zinc Alloy Coated Steel - hot-dip al uminum & zinc alloy coated structural steel

ASTM A792/A792M-10(2015) - Techstreet

ASTM A792/A792M-10(2015) Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process. standard by ASTM International, 10/01/2015. View all …[PDF]

the Hot-Dip Process1 - United Metal Products

2. Referenced Documents 2.1 ASTM Standards:2 A 90/A 90M Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings A 308/A 308M Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process[PDF]

Applicable Standards - Dana Group

Other Tolerances ASTM A792 EN10215 Surface Quality & Treatment EN10215 Coating Bend Test ASTM A792 EN10215 Suggested Minimum Inside Radii for Cold Bending ASTM A792 Conversion Factors b/w Coating Weight and Thickness ASTM A792 ASTM A792 - 97 Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-dip Process Quality Designations

ASTM-A653 | Standard Specification for Steel Sheet, Zinc ...

Structural steel, high strength low alloy steel, solution hardened steel, and bake hardenable steel are available in several grades based on mechanical properties. Yield strength, elongation, and bending properties of the steel shall be determined. A bend test shall be done to the coated sheets.

Standard Specification for General Requirements for Steel ...

A755/A755M Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products. A792/A792M Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process. A875/A875M Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot ...[PDF]

ASTM COATING WEIGHT DESIGNATION OF COATED …

ASTM Coating Weight Designation of Coated Sheet Steel for Construction Applications 3 minimum triple-spot average for one side and a single-spot minimum coating weight for the total of both sides. This ensures standards of uniformity. This is significant because typical applications require most of the corrosion protection on just one side.

ASTM A653 Building Material Steel Sheet

· Web viewASTM A653: Standard Specification for Steel Sheet, Zinc Coated (Galvanized) or Zinc Iron Alloy Coated (Galvannealed by the Hot Dip Process. ASTM A792: Standard Specification for Steel Sheet, 55 percent Aluminum Zinc Alloy Coated by the Hot Dip Process.

Galvalume Coil And Sheet - russelmetals

The galvalume coating is an alloy consisting of approximately 55% aluminum, 43.4% zinc and 1.5% silicon by weight, which is applied to steel by the continuous hot dip process. Galvalume steel sheet offers the best qualities of aluminum coated (aluminized) and zinc coated steel sheet (galvanized).

Aluminum Zinc Alloy Coated Steel Roof Sheet

Galvalume - Official SiteWelcome to Galvalume ® BIEC International Inc. is the worldwide licensor of the technology and know-how associated with 55% Aluminum-Zinc alloy coated sheet steel (better known as GALVALUME). A measure of the success of this program is the fact that virtually all of the major steel companies worldwide have become licensees of BIEC.Product Information · Product ...[PDF]

Coated Steel - Yieh Corp.

The coating alloy comprises about 55% Al, 1.5% Si and balanced zinc. Uniform and pleasing appearance, ... Hop-Dip 55% Al-Zn Coated Steel Coil 4. PVDF ASTM (1996) A755 ASTM (1998) A591 CQ, DQ, CS, HSLAQ ASTM A591 A, B, C ... Available Size of Pre-Painted Hot-Dip Galvanized Steel Sheet Coating Thickness Thickness (mm) Width (mm) Top: 5 ~ 12 um

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.