Tel: +86-371-86151827

jis standard galvalume steel sheet alloy coated

Steel grade:jis standard galvalume steel sheet alloy coated

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

jis standard galvalume steel sheet alloy coated Introduction

[PDF]

Hot-dip aluminum-coated steel sheets

4. Oil coating • JIS G 3314-2110 (abstract) Hot-dip aluminum-coated steel sheets and bands • JIS G 3314-2010 (abstract) Hot-dip aluminum-coated steel sheets and bands • NSSMC Product Standards • NSSMC Product Standards Type Type Application Main use Aluminum coating designation Type 1 C SA1C Heat resistance (commercial) 40 、60 80 100 120[PDF]

Coated Steel - Yieh Corp.

Coated Galvalume The coating alloy comprises about 55% Al, 1.5% Si and balanced zinc. Uniform and pleasing ... Galvalume (55% Al-Zn Coated Steel Coil) JIS G3317 1994 ASTM A875M 1997 ASTM A924M 1997 ... Coated Steel 3 - 16 Standard Color

55% Aluminum Zinc Alloy Coated Steel In Coils - Buy 55% ...

55% Aluminum Zinc Alloy Coated Steel In Coils , Find Complete Details about 55% Aluminum Zinc Alloy Coated Steel In Coils,55% Aluminum Zinc Alloy,Galvalume Steel Coil,Aluminum Foil from Supplier or Manufacturer-Shandong Juyesteel Technology Co., Ltd.User rating: 5/5[PDF]

ASTM COATING WEIGHT DESIGNATION OF COATED …

ASTM Coating Weight Designation of Coated Sheet Steel for Construction Applications 3 minimum triple-spot average for one side and a single-spot minimum coating weight for the total of both sides. This ensures standards of uniformity. This is significant because typical applications require most of the corrosion protection on just one side.

en10215 steel - pressure-vessel-steel

JIS G3321 Japanese Standard Galvalume Steel Coil ... Welcome to buy JIS G3321 Japanese Standard Galvalume Steel Coil from ZHONGNIU which is one of the leading and professional manufacturers and … supply galvalume steel sheet/plate DX51D+AZ EN 10215 … Supply Galvalume Steel Sheet/plate Dx51d+az En 10215 For ...

Aluminum Zinc Alloy Coated Steel Sheet for Roofing

Fame Best Group Limited is Aluminum Zinc Alloy Coated Steel Sheet for Roofing supplier located in weifang city, shandong province, china ... Standard. JIS G 3312, GB/T 14978-2008. Material. DX51D , SGCC , SGCH. ... Corrugated PPGI Root Sheet, Corrugated Galvanized Steel Sheet, Galvalume Steel Coil, Ridge Cap and so on. The factory is located in ...

Galvalume Steel In Coil ASTM JIS - srilankasports.org

Galvalume Steel Coil Jis G3321 manufacturers & suppliers. If you are about to import Galvalume Steel Coil Jis G3321, you can compare the Galvalume Steel Coil Jis G3321 factories and manufacturers with reasonable price listed above. More related options such as galvalume steel coil, steel coil, gl steel coil could be your choices too.

JIS G3321 Japanese Standard Galvalume Steel Coil ...

Welcome to buy JIS G3321 Japanese Standard Galvalume Steel Coil from ZHONGNIU which is one of the leading and professional manufacturers and suppliers of various steel products in China. Providing you with competitive price and good after-sale service, we're expecting to your cooperation. Welcome to contact our factory for more information.

What is Galvalume? | Metal Supermarkets - Steel, Aluminum ...

The thickness can range somewhat depending on the coating specification. If the coating thicknesses of a Galvalume-coated steel and a galvanized steel are equal, the Galvalume steel will generally outlast the galvanized one, depending on the environment. What Type of Metal Is Galvalume? Galvalume coating is most commonly applied to carbon steel ...

Standard Specification for Steel Sheet, Zinc-Coated ...

ASTM A653 / A653M-18, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process, ASTM International, West Conshohocken, PA, 2018, astm.org. Back to Top

galvalume sheet steel, galvalume sheet unit weight - China ...

Next: Quality Inspection for Ppgi Coils,Color Coated Steel Coil,Ral9002 White Prepainted Galvanized Steel Coil Z275/metal Roofing Sheets Building Materials galvalume sheet steel galvalume sheet …

en10215 steel - pressure-vessel-steel

JIS G3321 Japanese Standard Galvalume Steel Coil ... Welcome to buy JIS G3321 Japanese Standard Galvalume Steel Coil from ZHONGNIU which is one of the leading and professional manufacturers and … supply galvalume steel sheet/plate DX51D+AZ EN 10215 … Supply Galvalume Steel Sheet/plate Dx51d+az En 10215 For ...

Aluminum Zinc Alloy Coated Steel Sheet for Roofing

Fame Best Group Limited is Aluminum Zinc Alloy Coated Steel Sheet for Roofing supplier located in weifang city, shandong province, china ... Standard. JIS G 3312, GB/T 14978-2008. Material. DX51D , SGCC , SGCH. ... Corrugated PPGI Root Sheet, Corrugated Galvanized Steel Sheet, Galvalume Steel Coil, Ridge Cap and so on. The factory is located in ...

Galvalume Steel In Coil ASTM JIS - srilankasports.org

Galvalume Steel Coil Jis G3321 manufacturers & suppliers. If you are about to import Galvalume Steel Coil Jis G3321, you can compare the Galvalume Steel Coil Jis G3321 factories and manufacturers with reasonable price listed above. More related options such as galvalume steel coil, steel coil, gl steel coil could be your choices too.

JIS G3321 Japanese Standard Galvalume Steel Coil ...

Welcome to buy JIS G3321 Japanese Standard Galvalume Steel Coil from ZHONGNIU which is one of the leading and professional manufacturers and suppliers of various steel products in China. Providing you with competitive price and good after-sale service, we're expecting to your cooperation. Welcome to contact our factory for more information.

Afp Galvalume/Aluzinc Steel Coil with JIS G3321 Standard

Afp Galvalume Steel, Competitive Price Galvalume Steel, Galvalume Steel Roofing manufacturer / supplier in China, offering Afp Galvalume/Aluzinc Steel Coil with JIS G3321 Standard, Prepainted Steel Coil Ral Color, Gi Galvanized Steel and so on.

E Aluminium zinc Alloy Coated Steel Coil - gofschools.org

High Quality Aluminum Zinc Alloy Coated Steel Coil. Coil, Galvalume Steel, Galvalume Steel Coil manufacturer / supplier in China, offering Aluminium-Zinc Alloy Coated Galvalume Steel Coil for Roof Sheet, Bright Galvanized/Zinc Steel Coil From Chinese Manufacturer, Favorable Price High Quality Corrugated Iron Roof Sheet and so on.[PDF]

PRODUCT SHEET - GALVALUME STEEL - Alstro

PRODUCT SHEET - GALVALUME STEEL Alstro represents GALVALUME producers that uses ... The alloy coated product nominally contains 55% aluminum, 43.5% zinc and 1.5% silicon by weight. Applied by the traditional hot-dipping process, the product is ideal for applications that ... COATING TYPE ALU-ZINC STANDARDS JIS:G:3321,EN10215,ASTM:A792 Page 2 of 4.

Galvalume (Aluminum-Zinc Alloy Coated Steel)-HAN MOO …

Description. Galvalume is a flat-rolled steel sheet coated with aluminum-zinc alloy by a continuous hot-dip process. The nominal alloy composition by weight is …

China Galvalume Steel Suppliers & Manufacturers & Factory ...

Hot dip galvalume steel sheet is also called Aluminum galvanized steel, to prevent oxidation of the substrate, Alu-zinc alloy is pre-coated on its surface, and when the zinc is worn, the aluminum forms a dense layer of alumina which prevents further corrosion of the...

Standard Specification for Steel Sheet, Zinc-Coated ...

ASTM A653 / A653M-18, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process, ASTM International, West Conshohocken, PA, 2018, astm.org. Back to Top

Galvalume Sheet Az100 ASTM Standard - China PPGI Supplier

camelppgi› ProductsGalvalume sheet standard: GB/T-14798, JIS G 3321, EN 10215, ASTM 792. Grade: SGLCC, DX51D+AZ. Thickness: 0.16-0.7 mm (±0.02 mm). 0086 15666536688 | [email protected] CAMELSTEEL; Steel Product. Color Coated Steel Coil; Colour Coated Roofing Sheets; Galvanized Steel Coil & Galvalume Steel Coil; Galvalume Roofing & GI Roofing Sheet; Wrinkled ...

Galvalume Aluminum-zinc alloy-coated Steel Sheet, View ...

Galvalume (GL) ideally combines characteristics of aluminum coated steel and galvanized steel. Galvalume steel is the result of an ideal alloy of aluminum and zinc. It consists of aluminum (55% in weight ratio but 80% in surface volume ratio), zinc (43.4% in weight) and silicon (1.6% in weight ratio) so it has both aluminum-unique corrosion ...

aluminum zinc alloy coated steel sheet- Aluminum/Al foil ...

aluminum zinc alloy coated steel sheet . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.

SGL™ | Products | Nippon Steel & Sumikin Coated Sheet ...

The highest peak of the coated steel sheet. It has been about 30 years since the launch of the GALVALUME ™ Steel Sheet. The GALVALUME ™ Steel Sheet has been used successfully all over Japan. Based on our GALVALUME ™ production technology, we developed Magnesium(Mg) added super corrosion resistance coated steel sheet SGL ™, which achieved more than 3 times greater than that of GALVALUME

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.