Tel: +86-371-86151827

p335nl2 pressure vessel steel plate

Steel grade:p335nl2 pressure vessel steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

p335nl2 pressure vessel steel plate Introduction

p335nl2 steel - pressure-vessel-steel

EN10028-3 P355NL2 Pressure Vessel Steel Plates … P355NL2 to EN10028-3 is a fine grained pressure vessel steel suitable for use at low temperatures. With its fine grained and improved notch toughness it is one of the ... P355NL2 Steel_steelmaterial. P355NL2 Steel.

p335nl2 steel - carbon-steeltube

Pressure vessel plate also named as boiler steel plate.These steel plates mainly used for building boilers and pressure vessels such as petroleum, chemical industry, power plant, boiler, uses in manufacturing the reactor, the heat interchanger, the separator, the …

Pressure Vessel (PVQ) Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsLeeco Steel is your resource for pressure vessel steel plate. PVQ, pressure vessel quality, steel plate. is used for the production of pressure vessels: a closed container designed to hold gases or liquids at a pressure substantially different than the ambient pressure.

p335nl2 steel - carbon-steeltube

P355NL2 steel plate,P355NL2 steel supplier,P355NL2 ... A pressure vessel steel grade with good weldability and high resistance to brittle cracking, P355NL2 steel is used by the world's fabricators for the manufacture of pressure vessel tanks for the storage of pressurised gases.

P355NL2 steel plate - BEBON INTERNATIONAL

EN10028 P355NL2 steel plate/sheet,EN10028 P355NL2 steel plate/sheet, under EN standard, we can regard P355NL2 steel plate/sheet for boilers and Pressure Vessels steels.EN10028 P355NL2 steel plate/sheet is for boilers and Pressure Vessels steels,it is a normalized steel plate and sheet which is mainly used for building pressure vessels and boilers and pipes for hot liquid.

Forging p335nl2 - A36 steel stock Forging Low-carbon steel

P355NH Pressure Vessel Steel - AZoM. P355NH is a pressure vessel steel grade with good weldability and high resistance to brittle cracking. It is used by the world's fabricators for the manufacture of . CASIDER SA Steel sheets P355NL2. Fine grained structural steel for pressure vessels.

pressure vessel steel plate suppliers -Triton Alloys Inc

Triton Alloys Inc. is a Pressure Vessel Steel Plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies Pressure Vessel Steel Plate to internationally approved quality standards for applications. Pressure Vessel Steel Plate have excellent quality to fully satisfy customer’s requirements.

P2656h P335nl2 P92 Carbon Alloy Steel Plate - alibaba

P2656h P335nl2 P92 Carbon Alloy Steel Plate , Find Complete Details about P2656h P335nl2 P92 Carbon Alloy Steel Plate,P2656h Carbon Steel Plate,P335nl2 Steel Plate,P92 Alloy Steel Plate Price from Supplier or Manufacturer-Tianjin Emerson Commercial And Trade Co., Ltd.User rating: 5/5

Gnee Steel – pressure vessel steel plate

Gnee steel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petro chemical industry

Pressure Vessel Steel - Brown McFarlane

Pressure Vessel Plate certified to all leading European, American and British grades is available, sourced from Western European Mills with Low Sulphur & Phosphorus content, vacuum de-gassed, calcium treated pressure vessel plate. Available in Plate thicknesses from 3mm up to 250mm, widths up to 4500mm and lengths up to 18000mm.

Pressure vessel steels - thyssenkrupp

Steel for pressure vessels, unalloyed, alloyed and creep-resisting according to DIN EN 10 028-2, DIN EN 10 028-3, DIN EN 10 028-3, DIN EN 10 028-4 and more.

EN10023-3 P355NL2 PRESSURE VESSEL STEEL PLATES

Find en10023-3 p355nl2 pressure vessel steel plates here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

Pressure Vessel Steel, Pressure Vessel Steel ... - Alibaba

Pressure Vessel Steel We stock and supply a wide range of pressure vessel steel plate grades for working environments where safe operating pressure is critical. Our pressure vessel steel is of China first-class mills origin which is the steel of choice for the world’s boiler & pressure vessel …

Pressure vessel steels - thyssenkrupp

Steel for pressure vessels, unalloyed, alloyed and creep-resisting according to DIN EN 10 028-2, DIN EN 10 028-3, DIN EN 10 028-3, DIN EN 10 028-4 and more.

Gnee Steel – pressure vessel steel plate

Gnee steel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petro chemical industry

p335nl2 steel - onlineshoppingsitesinindia.co.in

EN10028 P355NL2 steel plate/sheet,EN10028 P355NL2 steel plate/sheet, under EN standard, we can regard P355NL2 steel plate/sheet for boilers and Pressure Vessels steels.EN10028 P355NL2 steel plate/sheet is for boilers and Pressure Vessels steels,it is a normalized steel plate and sheet which is mainly used for building pressure vessels and boilers and pipes for hot liquid.

EN10023-3 P355NL2 PRESSURE VESSEL STEEL PLATES

Find en10023-3 p355nl2 pressure vessel steel plates here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

1Cr17Ni7 p275nl2 steel plate as per en 100283 - tomcast.in

EN 10028-3 P275NL2 steel plate Introduction and application P275NL2 steel plate in a boiler and pressure vessel steel, P275NL2 steel plate have definite characteristic, have very good solderability. P275NL2 steel plate is mainly used for manufacturing boiler and pressure vessel, also can make transportation pipe.

P355NH, P355NL1, P355NL2 Pressure Vessel Steel plate

P355NH, P355NL1, P355NL2 Pressure Vessel Steel plate. The combined quantities of Niobium, Titanium and Vanadium should be 0.12% max. 6.To find out more about P355 NH, NL1 & NL2 and to receive a competitive quotation for the supply of this material, please to contact us. ■ Steel Plate SA299GrB..

P355NL2,EN10028-3 Grade P355NL2,P355 NL2 STEEL PLATE ...

P355NL2,EN10028-3 Grade P355NL2,P355 NL2 STEEL PLATE. EN10028 steel grade supersedes the older BS and DIN standards. P355NL2 steel grade is one of grade in En10028-3, which is non alloy and alloy steels with specified elevated temperature properties. P355NL2 grades are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.

P355 NH Steel Plate, P355NH, EN10028-3 P355NH Pressure ...

Rexton Steel & Alloys inc is leading manufacturers, exporters, suppliers of P355 NH Steel Plate, P355NH, EN10028-3 P355NH Pressure Vessel Steel Plates, Pressure Vessel Plate EN 10028:3 P355NH, Pressure Vessel Steel Plates, P355NH Pressure Vessel Steel at low rate to our worldwide clients from Mumbai, India.

MetalsDepot® - A516 PVQ Plate | Pressure Vessel Plate ...

A516 PVQ Plate - Pressure Vessel Quality. A516-70 PVQ Steel Plate aka Pressure Vessel Quality steel plate is designed primarily for use in welded pressure vessels where notch toughness or crack resistance is required. A516 Grade 70 is the most common high strength steel plate used in the construction of boilers and pressure containment fabrication...[PDF]

Low alloy steel plates for low temperature pressure …

GB 3531—2008. 1. Low alloy steel plates for low temperature pressure vessels. 1 Scope This standard specifies dimensions, shapes, weights and tolerances, technical requirements, test methods, inspection rules, package, marks and product quality certificates of low alloy steel plates for low temperature pressure vessels.

15CrMoR 410B Hot Rolled boiler and Pressure vessel

Boiler Steel Plate Q345r, Boiler Steel Plate 20r, Boiler Steel Plate 16mndr manufacturer / supplier in China, offering Boiler and Pressure Vessel Steel Plate 16mnr/Alloy Steel Plate, PPGI Galvanized Steel Coil 0.15~2.30mm From China, Q235 a Carbon Steel Plate for Hot Rolled and so on.

asme a621dq - KATALOR STEEL

A 621 CQ - SAE 1010 steel plate/sheet, under ASTM ... ASME SA572 Gr.55 low alloy high strength structure steel plate hardness; ASTM - BEBON INTERNATIONAL. ASTM-SAE A621DQ-SAE1010 steel plate/sheet,ASTM-SAE A621DQ-SAE1010 steel plate/sheet, ... ASTM A516Gr70/ASME SA516Gr70 is an excellent choice for service in lower than ... p335nl2 steel

Carbon Steel Plates for Pressure Vessels - AZoM

Pressure Vessel Steels supplies superior quality carbon steel plate for boiler and pressure vessel fabrication which is perfectly suited to the high standards set by the oil, gas, and petrochemical sectors, which is why they stock a wide range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

Q345R Pressure Vessel Steel Plate for Boiler Manufacture

Q345R Pressure Vessel Steel Plate. According to the design document, for steel plate with thickness greater than 80mm, ultrasonic testing can be added to steel plate thickness. For steel plate thickness is 30 ~ 36 mm, ultrasonic testing requirement is not lower …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.