Tel: +86-371-86151827

steel sheet piling z type steel

Steel grade:steel sheet piling z type steel

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel sheet piling z type steel Introduction

Hammer & Steel | Steel Sheet Piling, "Z" & Flat Section ...

Steel Sheet Piling ("Z" & Flat Section Sheet Piles) The Z shape of each section lends to its structural strength which is determined not only by the size, but also by the thickness of the steel. Of course, the soil conditions in which the section is driven will also affect the performance of the foundation or wall.Heavy-Duty Z Sheet Piling - PZ · Used Sheet Piling · Esz Sheet Piling

Buy Z Type Sheet Piling Product on Shunli Steel Group

Compared to U type sheet piles, Z Type Sheet Piling could provide a larger section modulus with lower material cost (lower weight), which is much more economic than traditional U sheet piles. One advantage of Z Type Sheet Piling is that during installation, the flange of the pile will be on the same line, which will be very convenient for the installation of waling beams.

Hammer & Steel | H&S High Efficiency Z Sheet Piling | PZC ...

High Efficiency Z Sheet Pile - PZC Manufactured by Gerdau Ameristeel, PZC sheet piling sections utilize a design that is wider, lighter and stronger than traditional Z-profile sheet piling. Given these characteristics, PZC sheet piling yields both lower material costs and fewer piles that need to be installed making it significantly more cost ...

Steel Sheet Piling | nucorskyline

Steel sheet piles are long structural sections with a vertical interlocking system that creates a continuous wall. The walls are most often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into.

Z-Profile Steel Sheet Piling | Gerdau

Z-Profiles, with their optimum distribution of material, are the most efficient sheet piling sections available for bending strength. With the interlocks located on the outer fibers of the wall — rather than at the center line, as is the case with Arch or U-Profile sheet piling sections – the wall designer is assured of the published section modulus.

Z Steel Sheet Piling - Maxx Piling | Sheet Steel Piling

maxxpiling› ProductsZ Steel Sheet Piling. Steel Qualities: S355GP, S390GP and S430GP in accordance with EN 10 248-1 Standard Availability: Can be supplied in singles, loose or crimped pairs and in lengths up to 26m.

Steel Sheet Piling | Gerdau

Steel sheet piling is a rolled structural steel section with interlocks on the flange tips which enable the joining of sections to form a continuous wall. Gerdau sheet piling has been successfully used in both permanent and temporary applications that cover the entire range of projects in the construction industry:

Sheet Piles - Emirates Steel

The future of Emirates Steel Sheet piles: Emirates steel is constantly developing and enhancing the range of sheet piles. By 2017 some new families of Z type sheet piles will be introduced .Also value added services as design services, crimping and welding of sheet piles , painting and application of sealant will be offered.

Steel Sheet Piling & Pipe Supplier - ChinaSteel-Group

Leading supplier of high performance steel sheet piling and pipe from ChinaSteel-Group.

Z Steel Sheet Piling - Maxx Piling | Sheet Steel Piling

maxxpiling› ProductsZ Steel Sheet Piling. Steel Qualities: S355GP, S390GP and S430GP in accordance with EN 10 248-1 Standard Availability: Can be supplied in singles, loose or crimped pairs and in lengths up to 26m.

Hammer & Steel | ESZ Sheet Piling | Rent ESZ 18 from ...

Hammer & Steel sells and rents Grade 60 steel sheet piles. These sheet piles give a quantifiable improvement of 20% in design life compared to a sheet pile in grade 50 steel. On a project with a life expectancy of 75 years that’s an additional 15 years of life. Using grade 60 in design can often lead to reducing a sheet pile size to carry the same loading. Weight saving of 30% or more are realistic.

Steel Sheet Piling Prices,Sheet Piles For Sale,Sheet Pile ...

China Shunli Steel Piling is the largest sheet pile manufacturer/supplier in the world .wholesale various high quality sheet piling prices products from shunli sheet piling suppliers and steel sheet piling for sale. Including steel sheet piles wall,cold formed steel sheet piles.Shunli Sheet Piles for sale around the world.We are also trench sheet piling and Omega steel pile manufacturers,U/Z ...

Z Type Sheet Pile, Z Type Sheet Pile Suppliers and ...

A wide variety of z type sheet pile options are available to you, such as aisi, astm, and din. You can also choose from ship plate, flange plate. As well as from steel plate, steel coil. And whether z type sheet pile is hot rolled, or cold rolled. There are 1,162 z type sheet pile suppliers, mainly located in Asia.[PDF]

SHEET PILE - china-steelpiling

60m,modulus of sections up to 5500cm3/m per single sheet piles. Steel grade up to S460 Any kind of complex fabrications ,corner sections, extra welding, painting... U type, Z type, Omega type, Trench sheet, hot rolled, cold rolled, OZ combined wall, HZ combined walls..all in our catalog.

Steel Sheet Piling Cost and Bidding [iSheetPile] - Think ...

Steel Sheet Piling Cost and Bidding Getting the Most Competitive Bids In order to secure a competitive bid for the sheet piling portion of your job, you must ensure that your design engineer properly outlines the strength parameters of the job and the required design life.[PDF]

Cold Formed or hot Piling, such as, PZ ... - RW Conklin …

R.W. Conklin Steel carries a vast inventory of Sheet Pile. Hot-Rolled Sheet Piling, such as, Lightweight, LZ, SZ, and MSZ (Mega-Z). All shapes can be used for combined walls and are available in all grade qualities. Similar to H-Pile, it is an exciting time for Sheet Pile as well. Additional sizes for both Hot-Rolled, PZC Sheet Piling, and Cold-Formed Mega-Z (MSZ) Sheet Piling are being manufactured.

Shoreline Steel | Manufacturers of Steel Sheet Piling

Shoreline Steel began manufacturing steel piling in 1983 and has established a worldwide reputation as a provider of quality, American made, steel sheet piling. We operate four mini-mill roll forming operations that produce 30 different piling sections in six different configurations.[PDF]

JFE Steel Sheet Piles

JFE Steel Australia Resources Pty Ltd. Level 19, CPA Centre, 307 Queen St, Brisbane, QLD 4001, Australia Phone : (61)7-3229-3855 JFE Steel India Private Limited 1101, 11th Floor, Unitech‘s Signature Tower, Tower-A, South City-I, NH-8, Gurgaon, Haryana, 122002, India Phone : (91)124-426-4981 JFE Steel (Thailand) Ltd.

Hot Rolled AZ Sheet Pile Specifications – J Steel ...

Hot Rolled AZ steel sheet piles are manufactured by ArcelorMittal in Luxembourg. AZ sections are continuous through the web with the interlocks located symmetrically on each side of the neutral axis, this positively influences the section modulus.[PDF]

Steel Sheet Piling Design Manual - mcipin

Steel Sheet Piling Design Manual Notice “The information, including technical and engineering data, figures, tables, ... designs of steel sheet pile retaining structures. The content is directed basically toward ... been satisfactorily established and the designer has-chosen the type of sheet pile structure best suited to the site.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.