Tel: +86-371-86151827

a36 steel vs sa 36 steel plate

Steel grade:a36 steel vs sa 36 steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a36 steel vs sa 36 steel plate Introduction

What Is the Difference Between SA36 and A36 Metals ...

What Is the Difference Between SA36 and A36 Metals? By Brock Cooper; Updated April 25, 2017 ... The ASTM 36 designation is for steel-covered plates, shapes and bars that are less than eight inches thick, with a yield of 36,000 psi. ... The ASME SA36 designation is based on the ASTM designation and covers all carbon steel plates, bars and shapes ...

What Is the Difference Between SA36 and A36 Metals?

Jan 27, 2016· What Is the Difference Between SA36 and A36 Metals? ... ASTM A36. The ASTM 36 designation is for steel-covered plates, shapes and bars that are less than eight inches thick, with a …

A36 SA36 Common carbon steel plate--YUSHENG STEEL

YUSHENG STEEL specialized in wide heavy steel plates,as for carbon structure steel plate ASTM A36,now we can roll the maximum thickness till 560 mm and gurantee the steel properity.The heaviest unit weight can reach to 46 Metric Tons using the 62 tons steel ingots.This is the unique technical in China steel mills.

A36 vs. 1018 Steel Comparison | Capital Steel & Wire

1018 steel and ASTM A36 steel are two of the most highly desired steel grades on the market. Our A36 vs 1018 steel article compares properties, machinability, hardness and other characteristics. As two of the most highly sought after steel grades on the market, many questions come up between the differences in 1018 and A36 steel.

ASTM A36 & SA36 Steel Plate Supplier - Rolled A36 & SA36 ...

universalsteelamerica› …› ASTM Structural PlatesUniversal Steel stocks A36 / SA36 from 3/16” thick up to 12.5” thick, provided in the as-rolled condition. This is the most commonly used grade of structural carbon steel plate with general applications across all …

ASTM A36 Steel Plate - A36 Carbon Steel Plate | Leeco ...

leecosteel› Steel Plate ProductsLeeco Steel distributes ASTM A36 steel plate, which is one of the most widely used carbon structural steels used in the industry. A36 carbon steel plate can be riveted, bolted, or welded in the construction of bridges and buildings, and for general structural purposes. We offer various thicknesses, lengths, and widths to meet your specifications.

What is the difference between ASME SA 36 steel plate and ...

A36 steel plate is carbon steel plate less than eight inches thick, with a yield of 36,000 psi. ASTM A36 steel is used in many applications throughout various industries, but does not include advanced alloys. ASME SA 36 steel plate is designed based on ASTM A36 steel plate and used in construction of bridges and other structures.

What is an ASTM A36 Steel equivalent? - Quora

A36 is a steel for carbon structure. It is a steel of American ASTM standard. ... A36 steel plate is similar to Q235B steel plate, it is one Q235b equivalent steel standard, another one is SS400. while there are still differences, you can get more detail info from here Q235b steel equivalent standard ASTM A36…

ASTM A36 Steel Plate - Completely Specifications You ...

What Is ASTM A36

Grade Guide: A36 Steel | Metal Supermarkets - Steel ...

For example, steel bars and plates must have a minimum yield strength of 36,000 pounds per square inch. While there are some chemical composition requirements that A36 steel must adhere to, the most important characteristic is the yield strength requirement. Other Mechanical Properties. A36 steel can have ultimate tensile strengths from 58,000 ...

ASTM A36 Steel Plate - Completely Specifications You ...

ASTM A36 is said to be same as EN S275 steel plate. A36 steel is a very low carbon steel that blends great strength with form ability. It can be safely welded with minimum caution. This structural steel plate can be galvanized to give enhanced corrosion resistance which ensures superior quality. Yield Strength and Tensile Strength

Annealed SAE-AISI 4140 vs. ASTM A36 Carbon Steel ...

Annealed SAE-AISI 4140 vs. ASTM A36 Carbon Steel. Both annealed SAE-AISI 4140 and ASTM A36 carbon steel are iron alloys. They have a very high 98% of their average alloy composition in common. For each property being compared, the top bar is annealed SAE-AISI 4140 and the bottom bar is ASTM A36 carbon steel.

A36 steel - Wikipedia

A36 steel has a Poisson's ratio of 0.26, and a shear modulus of 75 GPa (10,900,000 psi). A36 steel in plates, bars, and shapes with a thickness of less than 8 in (203 mm) has a minimum yield strength of 36,000 psi (250 MPa) and ultimate tensile strength of 58,000–80,000 psi (400–550 MPa).Properties·

What is an ASTM A36 Steel equivalent? - Quora

A36 is a steel for carbon structure. It is a steel of American ASTM standard. ... A36 steel plate is similar to Q235B steel plate, it is one Q235b equivalent steel standard, another one is SS400. while there are still differences, you can get more detail info from here Q235b steel equivalent standard ASTM A36…

A36 WPS for A 516 Gr70 - American Welding Society

Jan 09, 2011· Topic Welding Industry / ASME Codes / A36 WPS for A 516 Gr70 ... ravi theCobra We used ER70s-6 for the A36 plate. The weld will be in the flat position, rotated. ... A 516 Gr 70 is plate. A 36 may be plate or shape. I assume you're talking of plate in both cases. Otherwise, a WPS for shapes wouldn't apply for plates.

ASTM A1011 vs ASTM A36 - ASTM (testing materials) Code ...

eng-tips› …› Engineering Codes, Standards & CertificationsJul 15, 2009· ASTM A1011 is defined as a sheet steel. For hot-rolled sheet, the general specification ASTM A568 indicates an upper limit of 0.230" (6 mm) for basically all widths. The range 4mm to 6mm is a bit of a gray area at the moment. ASTM A1011 Grade 36 Type 2 was intended to match ASTM A36 plate steel as close as possible in a sheet thickness.

A36 Steel Plate | Precision Grinding, Inc.

A36 steel general information. The A36 steel specification was first issued in 1960. Today, engineers specify ASTM A36 for more structural steel fabrications than any other type of plate. Consequently, it is the most purchased hot-roll steel plate in the world and …

0.25" A36 Hot Rolled Plate - Online Metal Store

Hot Rolled Steel Plate A36 (0.25") is made of low carbon steel that is commonly found in most industries as it offers good weldability, machinability, and can be heat treated to harden its surface. Unlike cold rolled steel, Hot Rolled Steel Plate A36 has a rougher surface and …

A-36 Properties - Benjamin Steel

Copper min % when copper steel is specified 0.20 * Note: For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted, up to the maximum of 1.35%.[PDF]

Structural Quality High Strength/Low Alloy Abrasion ...

Hot Rolled – Carbon Steel ASTM A36, ASME SA36 ASTM A709 Gr. 36. ASTM A36 A structural quality carbon steel for general structural purposes. Engineered with a minimum yield point of 36 KSI. A36 plates can be used to create lighter weight structures and equipment and provides good weldability. Mechanical Properties Minimum Tensile Elongation Carbon

ASTM A36 / A36M - 14 Standard Specification for Carbon ...

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.. ASTM Standards. A6/A6M Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling. A27/A27M Specification for Steel Castings, Carbon, for General Application

A36 Steel Plate | Midwest Steel & Aluminum

Steel plate is processed by flame cutting or High Def Plasma cutting. Hi Def Plasma is utilized to sizes 1" and under, over 1" is flame cut. A36 Steel plate has a 36,000 min yield strength. Steel Plate. Steel plate A36 is stocked in all pattern sizes up to 96" x 288" and can be processed to special shapes per print.

ASME SA36,SA36 steel - JOIN WIN STEEL - Steel Plate,HRC ...

ASTM A36 and ASME SA36 is common carbon steel plates.JW steel keep more than 2000 tons A36 steel plate,steel coi,steel profile in stock. ... Hot-rolled Common Carbon structural steel ASME SA-36/SA-36M Location: Join-win steel > steel plate / sheet > Hot-rolled Common Carbon structural steel ASME SA-36/SA-36M. Standard: ASME SA-36/SA-36M ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.