Tel: +86-371-86151827

dual phas steel sheet 2507

Steel grade:dual phas steel sheet 2507

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: []

dual phas steel sheet 2507 Introduction

dual-phas steel sheet 2507, View dual-phas steel sheet ...

Description . dual-phas steel sheet 2507,2507 duplex stainless steel sheet,S32906 stainless steel plate, s32906 stainless steel sheet,UNS S32906 stainless steel plate . standard . ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, DIN 17441. Thickness . 0.3mm-100mmUser rating: 5/5

Duplex 2507 Stainless Steel Products and Specifications ...

General Properties. Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.Duplex 2205 Specifications · Ldx2101 Stainless Steel · Duplex 2304 Stainless Steel · Quick Quote

Duplex Stainless Steel - Dual phase steel - S32750 S32205 ...

Acceptable phase balance is usually 30 – 70% Ferrite . Duplex welding consumables are suitable for joining duplex to austenitic stainless steel or carbon steel; they can also be used for corrosion resistant overlays. Nickel based welding consumables can be used but the weld strength will not be as good as the parent metal, particularly on ...

Dual-phase steel - Wikipedia

Dual-phase steel (DP steel) is a high-strength steel that has a ferritic–martensitic microstructure. DP steels are produced from low or medium carbon steels that are quenched from a temperature above A 1 but below A 3 determined from continuous cooling transformation diagram.

Home [deysteel]

The company has strong technical strength, with more than specializing in smelting, casting, forging, machining, cold test technical personnel, products cover 200, 300, 400 series stainless steel, dual phase steel (2205,2507), super stainless steel(904L) , high temperature alloy (309S, 310S), and the smelting of low alloy steel casting, forging and cold finishing.

Dual Phase Steel 2205 Wholesale, Steel 2205 Suppliers ...

Alibaba offers 22 dual phase steel 2205 products. About 18% of these are flanges, 4% are pipe fittings, and 4% are other metals & metal products. A wide variety of dual phase steel 2205 options are available to you, such as aisi, jis, and astm.

Dual-phase steels: Product portfolio of thyssenkrupp

We at thyssenkrupp have widened our portfolio of cold-rolled dual-phase steels well beyond the conventional high-strength steels. We have added new grades which as well as offering high energy absorption and deformation resistance also display enhanced cold-forming properties – and allow substantial weight savings in the car body.[PDF]

The Use of 2205 Duplex StainlessSteel for Pharmaceutical ...

gauge 2205 duplex stainless steel sheet and 3/16 inch (4.8 mm) thick 2205 plate. Product contact surfaces were ... anced so that the austenite and ferrite phase have ... stainless steel refers to the dual austenite/ferrite microstructure. The increased nitrogen content and fine-grained microstructure of 2205 duplex stainless steel result in ...

steel sheet cold rolled dual - alibaba

Alibaba offers 452 steel sheet cold rolled dual products. About 12% of these are steel sheets, 1% are stainless steel sheets. A wide variety of steel sheet cold rolled dual options are available to you, such as astm, aisi, and jis.[PDF]

Dual Phase steels - automotive.arcelormittal

Dual Phase steels can be drawn on conventional tools, provided the settings are properly adjusted. For example, drawing pressure should be increased by approximately 20% for a Dual Phase 600, compared to a micro-alloyed (HSLA) type steel of the same thickness.[PDF]

Mechanical properties of Dual-Phase steels

Mechanical properties of Dual-Phase steels Prodromos Tsipouridis ... Strength Steels" (AHSS), were developed from the sheet steel suppliers in cooperation with the automakers and design engineers. These grades exhibit higher rates of work hardening than ... dual-phase steel production in the hot strip mill demands precise control ofAuthors: Jose GerbasefilhoAbout: Dual-phase steel

About Us - deysteel

Wuxi Daeryou Metal Material Co.,Ltd is located in Wuxi, Jiangsu. Mainly engaged in the export of stainless steel plate/ coil/ strip. The company has strong technical strength, with more than specializing in smelting, casting, forging, machining, cold test technical personnel, products cover 200, 300, 400 series stainless steel, dual phase steel (2205,2507), super stainless steel(904L) , high ...

Special Steel Products, Special Steel Products direct from ...

dual-phas steel sheet 2507. US $1000 - 3500 / Metric Ton. 0.5 Metric Tons (Min. Order) Construction Duplex Stainless Steel s32304. US $1000 - 3500 / Metric Ton. ... Hot selling High quality S31803 Duplex stainless steel sheet/plate. US $500 - 1600 / Ton. 0.5 Tons (Min. Order) Display similar products. 1 2.

Super Duplex 2507 Stainless Steel - Jaway Steel

Super Duplex 2507 stainless steel is a Ferritic Austenitic (duplex) stainless steel, it is with excellent resistance to point corrosion, crevice corrosion and uniform corrosion.. The dual phase microstructure ensures that this kind of stainless steel has high resistance to stress corrosion cracking and has high mechanical strength.[PDF]

Duplex 2507 Specifications: UNS S32750

DUPLEX 2507 (UNS S32750) Penn Stainless inventory now includes Duplex 2507 (UNS S32750) in sheet, sheet coil, plate, round bar, processed flat bar and tubular products. GENERAL PROPERTIES Duplex 2507 is a super duplex, 25% chromium, 4% molybdenum, and 7% nickel, stainless steel that is used for applications that require exceptional[PDF]

Dual-phase steels | voestalpine Steel Division

Data sheet dual-phase steels | page 1/4 | 09/2018 Dual-phase steels Dual-phase steels are part of the ahss classic product line of voestalpine in the field of ultralights and are characterized by excellent physical prop-erties, including low yield strength, high work hardening, high tensile strength as …

Dual Phase (DP) Steels | WorldAutoSteel

DP (ferrite plus martensite) steels are produced by controlled cooling from the austenite phase (in hot-rolled products) or from the two-phase ferrite plus austenite phase (for continuously annealed cold-rolled and hot-dip coated products) to transform some austenite to ferrite before a rapid cooling transforms the remaining austenite to ...

Duplex stainless steel -

For chloride pitting and crevice corrosion resistance, their chromium, molybdenum and nitrogen content are most important. Duplex stainless steel grades have a range of corrosion resistance, similar to the range for austenitic stainless steels, i.e from Type 304 or 316 (e.g. LDX 2101©) to 6% molybdenum (e.g. SAF 2507©) stainless steels.

Duplex 2205 Stainless Steel - Penn Stainless Products

Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

Duplex stainless steel, Duplex stainless steel direct from ...

Duplex stainless steel from Tianjin Tiangang Guanye Co., Ltd.. Search High Quality Duplex stainless steel Manufacturing and Exporting supplier on Alibaba. ... dual-phas steel sheet 2507. $1,000.00 - $3,500.00 / Metric Ton. 0.5 Metric Tons (Min. Order) Construction Duplex Stainless Steel s32304.

For power generation EN Dual Phase Stainless Steel Plate

For power generation EN Dual Phase Stainless Steel Plate. The degradation of mechanical properties in dual phase 309L stainless steel RPV clad caused by the presence of s-phase as well as neutron irradiation was investigated using a small punch (SP) test.

Alloy S31803 & Alloy S32205 | Great Plains Stainless Steel

Alloy S31803 and S32205 stainless steel is a dual-phase stainless steel whose grain structure is ferritic and austenitic, hence the name “duplex”. With twice the mechanical strength and corrosion resistance of common austenitics, alloy S31803 and S32205 stainless steel offers some advantages over 316L and 317L:

Dual Phase Steel, Dual Phase Steel Suppliers and ...

Alibaba offers 1,524 dual phase steel products. About 7% of these are flanges, 7% are laser cutting machines, and 5% are wristwatches. A wide variety of dual phase steel options are available to you, such as aisi, jis, and astm.

Dual Phase Steel - ThomasNet

thomasnet› Supplier DiscoveryDistributor of dual phase steel. Types include galvannealed, hot dipped galvanized, aluminized and hot rolled steel. Available in min. and max. yield strength from 450 MPa to 980 MPa. and 380 MPa to 1100 MPa respectively and min. tensile strength from 65.2 ksi to 113.1 ksi. Offered in coil and sheet forms.

Duplex Stainless Steel 2205 Corrosion Resistant Grade

About Duplex Stainless Steel 2205. Duplex Stainless Steel 2205 is designed to prevent common corrosion issues that occur with stainless steel 300 grades.It belongs to a family of dual phase austenitic and ferritic stainless steels. This work hardened steel is a widely used grade among the duplex stainless steel family as it has better corrosion resistance than other steels.

Sandvik SAF 3207 HD™ — Sandvik Materials Technology

Being a dual phase material (austenitic-ferritic), Sandvik SAF 3207 HD™ will present a different tool wear profile from that of austenitic stainless steels. The cutting data (speed and feed) must, therefore, be lower than that recommended for austenitic grades.[PDF]

Stainless Steel Grade Datasheets

Grade Data Sheet 301 301L 301LN Revised May 2008 Page 1 of 2 Grade 301 is a high work-hardening rate austenitic stainless steel. It can be supplied with a …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
0.3-3.0 mm
coil or as per requirement.
coil or as per requirement.
No.1 or 1D
GB/T4237-2015 ASTM A240/A240M JIS G4304
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.


Please send your processing requirement/ the drawings to or leave a message below. Our professional after-sales personnel will response you in 24 hours.