Tel: +86-371-86151827

prime abrasion resistant 16mm thick steel plate

Steel grade:prime abrasion resistant 16mm thick steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

prime abrasion resistant 16mm thick steel plate Introduction

Hardox® wear plate- Wear and abrasion resistant steel - SSAB

Hardox® wear-resistant steel helps to reduce weight and extend the service life of truck bodies, containers, dumpers, buckets, garbage trucks and more. Originally intended as wear plate, it turns out that Hardox® steel can act as a load-carrying part in many applications due to its unique combination of hardness and toughness.Hardox 500 Tuf · Contact Us · Hardox Extreme · Product Overview

NM600 wear resistant steel plate hr 12mm thickness

NM600 wear resistant steel plate hr 12mm thickness. 5mm 16mm Thickness Wear resistant steel plate. Abrasion Resistant Steel Plate, Wear Resistant Plate, Wear Resistant Steel Plate manufacturer / supplier in China, offering 5mm Nm400 Nm500 Nm600 Wearproof Plate Price, Made in China Solid Hex Copper Rod Malaysia, 30X50 20X40 High Quality Copper Brazing Rod and so on.

High Quality Prime Abrasion Resistant Steel Plate

Steel Plate, Wear Steel Plate, Wear Plate manufacturer / supplier in China, offering Nm400 Prime Quality Abrasion Wear Resistant Steel Plate, Hot Rolled Abrasion Resistant Alloy Wearing Steel Plate for Steel Materials, Hot Rolled Abrasion Resistant Nm450 Nm500 Alloy Wearing Steel Plate …[PDF]

Abrasion resistant steel plate - High Strength Plates

NSSMC`s abrasion resistant ABREX steel plate is designed by placing priority on resistance to abrasion caused by earth and sand. It offers excellent scratching abrasion resistance 2 to 5 times that specified for mild steel. Boulders and rocks cause abrasion when …

Steel plate 5mm thick thickness Abrasion Resistant Steel Plate

Steel Plate Grades. Carbon Steel: ... Low Carbon Plate Steel is manufactured to three separate carbon ranges that relate to thickness and end use requirements. Plates 3/4″ and lighter are produced to the lowest carbon range (0.10-0.20) for maximum cold forming and welding properties. ... ABRASION RESISTANT STEEL GRADES.

abrasion resistant Soilrs all sheet

Alloy Steel Plate, Hot Rolled Steel Sheet, High Strength Abrasion Resistant Steel Plate manufacturer / supplier in China, offering Hot Rolled Wear Resistant Steel Plate, Ck45 Carbon Steel Plate, S355mc 10mm Thick Hot Rolled Steel Plate Price Per Kg and so on.

hot rolled abrasion resistant 50mm thick - srilankasports.org

steel plate,steel pipe,steel coil . Steel Plate, Weathering Steel Plate, Weather Resistant Steel Plate manufacturer / supplier in China, offering 10mm Thick Hot Rolled Anti-Corrosion Corten B Steel Plate for Building Materials, P265gh Boiler Steel Plate/Hot Rolled Steel Plate/Alloy Steel Plate, Hot Rolled Dillidur400 Quard400 Xar400 Abrasion Resistant Steel Plate and so on.

Buy High Quality Prime Abrasion Resistant Steel Plate

Steel Plate, Wear Steel Plate, Wear Plate manufacturer / supplier in China, offering Nm400 Prime Quality Abrasion Wear Resistant Steel Plate, Hot Rolled Abrasion Resistant Alloy Wearing Steel Plate for Steel Materials, Hot Rolled Abrasion Resistant Nm450 Nm500 Alloy Wearing Steel Plate …

China Prime XAR300 Hot Rolled Wear Resistant Steel Plate

China Prime XAR300 Hot Rolled Wear Resistant Steel PlateSteel Plate, Wear Steel Plate, Wear Plate manufacturer / supplier in China, offering Nm400 Prime Quality Abrasion Wear Resistant Steel Plate, Az150 SGLCC Aluzinc Galvalume Steel Coil, ASTM A792 Az150 Galvalume Steel Sheet in …

Buy Prime Abrasion Resistant Steel Plate - gofschools.org

abrasion resistant steel wear plate . Katalor is the professional Chinese abrasion resistant steel wear plate supplier .If you need abrasion resistant steel wear plate , we can put the abrasion resistant steel wear plate order to our steel mill directly or collect these goods from our stock directly if we have enough ex-stock .Besides. if you need any offer or if you want to know the price and ...

Abrasion Resisting Plate - Tell Steel Inc.

ABRASION RESISTING PLATE ( AR, AR-400, AR-500) AR-500 alloy steel will reduce material handling costs to a minimum for earth moving, mining and other similar industries in which a combination of toughness and abrasion resistance is required. Because of its exceptional durability in slide wear, rub wear and heavy wear it is used in mining equipment,...

Hardox wear plate- Wear and abrasion resistant steel - SSAB

Hardox® wear plate is the world's leading abrasion-resistant (AR) steel. Hardox® is hard through and through, from the surface deep down to its core, giving you extended service life and high productivity in the most challenging environments.[PDF]

AR400F Product Data Sheet 2012 04 01 - SSAB

Abrasion Resistant Steel Plate. General Product Description. AR400F is a through-hardened, abrasion-resistant plate with a nominal hardness of 400 HBW. This product is intended for applications where a good combination of abrasion resistance, formability, and weldability is desired.

Discount Steel – Steel Plate: A36, Pickled and Oiled ...

Buy Metal Online – Steel Plate: Hot Rolled, Pickled and Oiled, AR200, AR400, T1, A588 – Order Large or Small Quantity Online – Cut to Size Steel Plate – No Minimum Order Discount Steel 1-800-522-5950

10mm Thick Steel Plate - hopkinsplasticsurgery

Stainless Steel Perforated Sheet Plate & Coils, … 2017-2-6 · Perforated Plates/ Heavy Perforations. Plates over 3mm thick upto 10mm thick in SS and upto 12mm thick in MS can be punched. Maximum width 2000mm x Maximum length upto 6000 mm possible. All kinds of holes viz: Round, Square, Capsule etc. can be punched.

Alloy, Heat Treat, & AR Steel – Olympic Steel

olysteel› ProductsHome / Products / Alloy, Heat Treat, & AR Steel Alloy, Heat Treat, & AR Products Olympic Steel stocks a complete line of Alloy, Heat Treated and Abrasion Resistant (AR) coil, sheet and plate in several locations across the United States.

AR 400/500-Highly Abrasive Environments - Alloy steel

aasteel› …› Mining (Abrasion Resistant Applications)AR 400/500. Home > Products/Industries > Mining (Abrasion Resistant Applications) > AR 400/500; Overview. These grades are used in highly abrasive environments within the mining, cement, aggregate, and various ground engaging applications.

Inventory — Ohio Steel Sheet & Plate

50,000 ton + Prime Steel Plate Inventory. Ohio Steel Sheet and Plate carries over 50,000-ton of domestic and foreign prime steel plate in multiple grades and sizes. The following is a short list of our most popular grades and sizes we keep on the floor for just in time deliveries.

Stainless Steel Handrail Fittings 40mm thick steel plate ...

40mm thick steel plate Ramfab - Steel Services STEEL SERVICES: •WE WORK WHEN OTHERS DON•T • 24 HOUR SERVICE• Our Steel Service Centre supplies carbon, stainless and non-ferrous metals cut to size or profiled on a CNC plasma cutter, guillotined, bent or pressed, rolled into cylinders or cones, holes drilled, flange rolling, ducting and pipe components, fabrication in kit-form …

Alloy & Abrasion Resistant Steel Plate | BBN Steel

Alloy & Abrasion. Resistant Steel Plate. This product is an as-rolled, medium-carbon steel plate designed for moderate wear resistance. It is referred to as AR200, AR235, or AR Medium depending on the manufacturer. This product is produced to a chemistry to achieve a desired Brinnell Hardness range.

S690Q thickness - MS Plates - napmr.org

Plates of S690Q steel grade Fine-grain structural steel after quenching and tempering Products description thickness of 100 mm and plate width of 1600 mm, the maximum length is 7500 mm*. Plates with thickness up to 50 mm are supplied with edges trimmed, with thickness of 51 to 100 mm …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.