Tel: +86-371-86151827

exstock gbt 713 q345r mild steel plate in ankara

Steel grade:exstock gbt 713 q345r mild steel plate in ankara

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

exstock gbt 713 q345r mild steel plate in ankara Introduction

Q345R,Q345R STEEL,Q345R PLATE - Mild steel plate ...

Boiler steel plate Q345R is the most used materials to build specified elevated boilers and pressure vessels.Q345R owned the minimum yield strength at 345 Mpa for thin thickness and tensile strength above 510 Mpa.The best equivalent steel grade with Q345R …Steel Plate · Contact

16MnDR material - cafethuys.nl

16MnDR,16MnDR STEEL,16MnDR PLATE. Steel grade 16MnDR under specification GB 3531 is mainly rolling as steel plates for low temperature boiler and pressure vessel usage.Boiler steel plate 16MnDR shall be done low temperature impacting test under minus 40 centigrade for thickness equal and belows 60mm,for heavy thickness above 60mm,this temperature can be higher as minus 30 centigrade.

16MnR,16MnR STEEL,16MnR PLATE - Mild steel plate ...

Now steel grade 16MnR is replaced by new grade GB 713 Q345R.Boiler steel plate 16MnR is the most used materials to build specified elevated boilers and pressure vessels.16MnR owned the minimum yield strength at 345 Mpa for thin thickness and tensile strength above 510 Mpa.The best equivalent steel grade with 16MnR is A516 Grade 70 in specification ASTM A516/A516M.

China steel plate supplier Q345R steel specificationsteel ...

s355jr Boiler and Pressure Vessel Steel Plate. S355JR is a kind of low alloy steel under EN10025 standard. S355JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.

Alloy Steel Plate Q245r 20r-BBN STEEL sale steel

20R,20R STEEL,20R PLATE - Mild steel plate,shipbuilding ... Now steel grade 20R is replaced by new grade GB 713 Q245R.20R boiler steel plate is normally used for building pressure vessels in pressure vessel manufacturers’s plants. High Quality Boiler and Pressure Vessel Steel Plate Q245r ...

Q235 Q325 Grade Steel Material steel - SK Steel

Q235 Steel Plate Equivalent Steel Standard-ASTM A36. Substitution of A36, SS400 and Q235 steel plate. Although the Q235 steel grade steel plate has lower mechanical properties than A36 and SS400 material, but in actual operation process, as long as the buyers do not have special requirement, often these three kinds of materials can be substituted.

Alloy Steel Plate Q245r 20r-BBN STEEL sale steel

20R,20R STEEL,20R PLATE - Mild steel plate,shipbuilding ... Now steel grade 20R is replaced by new grade GB 713 Q245R.20R boiler steel plate is normally used for building pressure vessels in pressure vessel manufacturers’s plants. High Quality Boiler and Pressure Vessel Steel Plate Q245r ...

Q345r Boiler Steel Plates - onlineshoppingsitesinindia.co.in

Q345R Pressure Vessel Steel Plate for Boiler ManufactureQ345R is common low alloy steel, it is the boiler pressure vessel commonly used steel type, the delivery state: hot rolled or normalization. Q345R Appication: Q345R steel plate is used in the inner tube of the multi-layer container, for the shell thickness is larger than 36mm for other compression elements (flanges, tube plates and flanges).

q345r steel - carbon-steeltube

Q345R,Q345R STEEL,Q345R PLATE - Mild steel plate ... Boiler steel plate Q345R is the most used materials to build specified elevated boilers and pressure vessels.Q345R owned the minimum yield strength at 345 Mpa for thin thickness and tensile strength above 510 Mpa.The best equivalent steel grade with Q345R is …

Q345r Alloy Steel Plate Sale On Line - gofschools.org

Q345r Alloy Steel Plate Sale On Line. High Strength Low Alloy Q345r Pressure Vessel Plate Qingdao Hengcheng Steel Co. Ltd. is a manufacturer for carbon steel plate and alloy steel plate in China for 15 years with 12 years exported experience, which is one of the best carbon steel plate and alloy steel plate manufacturer in China.

16MnR steel plate for boiler and pressure vessel

16MnR,16MnR STEEL,16MnR PLATE. Now steel grade 16MnR is replaced by new grade GB 713 Q345R.Boiler steel plate 16MnR is the most used materials to build specified elevated boilers and pressure vessels.16MnR owned the minimum yield strength at 345 Mpa for thin thickness and tensile strength above 510 Mpa.The best equivalent steel grade with 16MnR is A516 Grade 70 in …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.