Tel: +86-371-86151827

p355nl2 steel plate specification

Steel grade:p355nl2 steel plate specification

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

p355nl2 steel plate specification Introduction

P355NL2 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. P355NL2 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

EN 10028:3 P355NL1 | P355NL2 - Brown McFarlane

Brown McFarlane carries a large range of pressure vessel plate stock certified to both EN 10028:3 P355NL1 and EN 10028:3 P355NL2 Widely specified for pressure vessels manufactured in Europe Probably the most popular pressure specification after discuss your business needs

P355NL2 steel, P355NL2 steel plate - BEBON STEEL

P355NL2 steel plate under En10028-3 standard, which is non alloy and alloy steels with specified elevated temperature properties.P355NL2 grades are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids. P355NL2 steel plate specification:

EN 10028 P355NL2 - MS Plates - napmr.org

P355NL2,P355NL2 steel plate,P355NL2 steel suppliers . EN 10028-3 P355NL2 steel Mechanical Properties P355NL2 this material is mainly used to fabricate boiler and pressure vessel. So ,same the other boiler and pressure vessel using steel plate, this kind of steel …

P355NL2 steel plate - BEBON INTERNATIONAL

EN10028 P355NL2 steel plate/sheet,EN10028 P355NL2 steel plate/sheet, under EN standard, we can regard P355NL2 steel plate/sheet for boilers and Pressure Vessels steels.EN10028 P355NL2 steel plate/sheet is for boilers and Pressure Vessels steels,it is a normalized steel plate and sheet which is mainly used for building pressure vessels and boilers and pipes for hot liquid.

A662 Grade B pressure vessel plate specification-A537 ...

BBN STEEL supply A662 Grade B pressure vessel plate specification, BN STEEL supply ASME SA204 multifunctional pressure vessel plate stock, Pressure Vessel Steel Plate,Boiler Steel plate[PDF]

Chemical composition, Mechanical ... - steel-grades

EN EN P355NL2 Steel Physical Properties by Longhai special steel - China steel suppliers E-mail: [email protected] steel-grades Chemical composition physical Properties standard download Round bar, Tube/Pipe, Steel plate, Sheet, Coil, Flat bar, Cold rolling, Steel wire, Steel strip Manufactory profile[PDF]

Chemical composition, Mechanical ... - steel-grades

EN EN P355NL2 Steel Physical Properties by Longhai special steel - China steel suppliers E-mail: [email protected] steel-grades Chemical composition physical Properties standard download Round bar, Tube/Pipe, Steel plate, Sheet, Coil, Flat bar, Cold rolling, Steel wire, Steel strip Manufactory profile

P355NL2,P355NL2 PLATE,P355NL2 STEEL

P355NL2 pressure vessel steel plate shall be done low temperature impacting test under minus 50 centi degree.The normal mill test certificate for P355NL2 boiler steel plate shall be …

P355NH, P355NL1, P355NL2 Pressure Vessel Steel plate

P355NH, NL1 & NL2 – pressure vessel steels used by the worlds leading fabricators supplying the oil and gas industry. A pressure vessel steel grade with good weld ability and high resistance to brittle cracking, P355NH is used by the world's fabricators for the manufacture of pressure vessel tanks for the storage of pressurized gases.

P355N ,P355NH, P355NL1, P355NL2, P275NH, steel plate ...

P355N ,P355NH, P355NL1, P355NL2, P275NH, steel plate ,EN10028-3 . EN 10028-3 steel grade specification is for flat products made of steels for pressure weldable fine grain normalized steel grade in P355N, P355NH, P355NL1, P355NL2, P275NH, P460NH, P460NL1, P460NL2, P275NL1 and P275NL2 steel grade. 1.

EN 100283 P355NL2 STEEL PLATE - s690q-heavy-plate

EN 100283 P355NL2 STEEL PLATE Category: Carbon steel material Model: Plates to EN 100283 are widely specified in the manufacturing of pressure vessels throughout Europe and the standard is regularly seen in other parts of the world where equipment has been originally designed by a European company.

p355nl2 steel plate - carbon-steeltube

P355NL2 steel plate,P355NL2 steel supplier,P355NL2 ... P355NL2 normalised steel plates are under EN10028 standard,we have S260NC steel material and specification,if you need S260NC steel suppliers and manufacturer ,please contact us. EN 10028:3 P355NL1 and P355NL2 - Stainless Steel Plate ... About EN 10028:3 Pressure Vessel Steel Plate.

A662 Grade B pressure vessel plate specification-A537 ...

BBN STEEL supply A662 Grade B pressure vessel plate specification, BN STEEL supply ASME SA204 multifunctional pressure vessel plate stock, Pressure Vessel Steel Plate,Boiler Steel plate

Supply: P355N, P355NH, P355NL1, P355NL2, P275NH …

Supply: P355N, P355NH, P355NL1, P355NL2, P275NH (Z15, Z25, Z35), steel plate, EN 10028-3, BBN Steel EN 10028-3 steel grade specification is for flat products made of steels for pressure weldable fine grain normalized steel grade in P355N, P355NH, P355NL1, P355NL2, P275NH, P460NH, P460NL1, P460NL2, P275NL1 and P275NL2 steel Gr.[PDF]

Plate for pressure vessel applications

P355NL2 6 – 60 mm Normalised - ASME SA516 / ASTM A516: Pressure vessel plates for moderate and lower temperature service with improved ... Plate for pressure vessel applications Carbon manganese pressure vessel steel plate . For further information, contact: ArcelorMittal South Africa, PO Box 2, Vanderbijlpark 1900. Toll free number 0800 005043

ASTM A36 Steel Plate - Completely Specifications You ...

With excellent properties, this steel plate can be bolted, riveted and welded in the construction of buildings, bridges, and buildings and for any general structural purposes. A36 Steel Equivalent materials. ASTM A36 is said to be same as EN S275 steel plate. A36 steel is a very low carbon steel that blends great strength with form ability.

P355N, P355NH, P355NL1, P355NL2, P275NH, steel plate, …

Sell P460NH, P460NL1, P460NL2, P275NL1, P275NL2, steel plate, EN 10028-3 1. EN 10028-3 steel grade specification is for flat products made of steels for pressure weldable fine grain normalized steel grade in P355N, P355NH, P355NL1, P355NL2, P275NH, P460NH, P460NL1, P460NL2, P275NL1 and P275NL2 steel grade 2. Adopting Standards: EN 10028-3

EN P355NL2 steel in RU - steel grade steel material

steel price of p355n equivalent astm,A36,A516GR70 steel . EN10028-3 P355NL2 steel plate EN10028-3 P355NL2, P355NL2 STEEL, P355NL2 PLATE, P355NL2 Mill Unitedsteel Plant is committed to product and supply EN10028-3 P355NL2, P355NL2 STEEL PLATE, P355NL2 Mill Plate as well as the equivalent grades as per ASTM, ASME, JIS , EN, UNS Specs.

Material P355 - pressure-vessel-steel

P355NL2 normalised steel plates are under EN10028 standard,we have S260NC steel material and specification,if you need S260NC steel suppliers and … EN 10028-3 P 355 N, Grade P 355 N, P 355 N steel EN 10028-3 P 355 N and 355 N, P level P 355 N steel is a kind of material for boiler and pressure vessel steel, mainly used in the welding of ...

p355nh equivalent asme material - Carbon steel,Alloy steel ...

En10023-3 P355NL2 Pressure Vessel Steel Plates. ... P355NL2 is the EN10028 equivalent to ASTM A516 70, but the ASTM grade is more commonly specified in Asia. EN10028-3 P355NH Pressure Vessel Steel Plates. P355NH is a pressure vessel steel to EN10028-3 that is used for high temperatures. ... All P355NH plates come with a material test ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.